Антенна philips sbc tt 750 00 инструкция

Для сохранения инструкции «Антенна телевизионная комнатная Philips SBC TT750/00» на русском языке на вашем компьютере либо телефоне, нажмите кнопку «Скачать инструкцию». Если активна кнопка «Инструкция онлайн», то Вы можете просмотреть документ (manual), в своём браузере онлайн.

Если у Вас нет возможности скачать инструкцию по эксплуатации либо просмотреть её, Вы можете поделиться ссылкой на эту страницу в социальных сетях и при удобном моменте скачать инструкцию. Либо добавьте эту страницу в закладки Вашего браузера, нажав кнопку «Добавить страницу в закладки браузера».

Congratulations! The product you have just

purchased offers you exceptionally high quality

reception. Please read the following instructions

before using the indoor aerial, and retain this

booklet for future reference.

(See also the illustrations on page 15.)

Universal amplified indoor aerial

SBC TT750

GB

Instructions for use

Connect the cable of the aerial to the television aerial socket.

If there is a video recorder already installed, connect the cable

of the aerial to the aerial socket of the video recorder.

If there is a cable network connection in use, disconnect this

cable from the television set or the video recorder, and connect

it to the socket on the back of the aerial (EXT. ANT).

Connect the mains lead of the aerial to a 230-240 VAC mains

socket. Note: the aerial is also fitted with a 12 VDC supply

socket for use in caravans, campers, boats, etc.

Press the power button (right switch) on the aerial. The red and

green LEDs light up. If you have connected an external cable

TV connection to the aerial’s EXT. ANT socket the aerial is now

operational and your television receives signals from the

external cable TV system. Proceed to steps 6 and 7.

To use the aerial without an external cable TV connection,

press the Intern button (left switch). The green LED changes to

orange indicating that the aerial is operational. Your television

set now receives signals directly from the SBC TT750 aerial.

Use the instruction manual supplied with your television set to

tune to the different channels. Rotate the parabolic UHF dish

(see Fig.2) and turn the amplifier control dial (Fig.3) to vary the

signal gain until you obtain optimum signal reception.

To obtain the best reception for VHF signals, vary the length

and angle of the telescopic aerials.

Connect Terrestrial signals (DVB-T).

To obtain the best reception for digital terrestrial signals its is

necessary that there are less as possible obstacles

(big trees/buildings etc.) between the transmitter and the antenna.

It is recommended that you put the antenna close to a window.

Set the gain control rotary-wheel in zero position and increase

the signal gain till you have obtained the optimal reception.

1

Notes

This aerial is powered once it is connected to a 230-240 VAC

mains supply. To disconnect the aerial from the mains supply

remove the power plug from the mains socket.

The base of the aerial has four rubber pads which provide stability

and which are ideal for all surfaces.

The label containing technical data can be found at the base of

the aerial.

Technical features

• Gain (aerial + amplifier): UHF/VHF 40 ±2 db

• Power supply: 230-240 VAC 50-60 Hz

12 VDC for use in caravans, campers, boats etc.

• Power consumption: 3VA

• Impedance: 75 Ohms

• Gain control for enhanced picture quality

• Safety regulations according to EN 60065

2

15

2

Connect the cable of the aerial to the television aerial socket.

If there is a video recorder already installed, connect the cable

of the aerial to the aerial socket of the video recorder.

If there is a cable network connection in use, disconnect this

cable from the television set or the video recorder, and connect

it to the socket on the back of the aerial (EXT. ANT).

Connect the mains lead of the aerial to a 230-240 VAC mains

socket. Note: the aerial is also fitted with a 12 VDC supply

socket for use in caravans, campers, boats, etc.

Press the power button (right switch) on the aerial. The red and

green LEDs light up. If you have connected an external cable

TV connection to the aerial’s EXT. ANT socket the aerial is now

operational and your television receives signals from the

external cable TV system. Proceed to steps 6 and 7.

To use the aerial without an external cable TV connection,

press the Intern button (left switch). The green LED changes to

orange indicating that the aerial is operational. Your television

set now receives signals directly from the SBC TT750 aerial.

Use the instruction manual supplied with your television set to

tune to the different channels. Rotate the parabolic UHF dish

(see Fig.2) and turn the amplifier control dial (Fig.3) to vary the

signal gain until you obtain optimum signal reception.

To obtain the best reception for VHF signals, vary the length

and angle of the telescopic aerials.

Instructions for use

Universal amplified indoor aerial

SBC TT750

Congratulations! The product you have just

purchased offers you exceptionally high quality

reception. Please read the following instructions

before using the indoor aerial, and retain this

booklet for future reference.

GB

Notes

This aerial is powered once it is connected to a 230-240 VAC

mains supply. To disconnect the aerial from the mains supply

remove the power plug from the mains socket.

The base of the aerial has four rubber pads which provide stability

and which are ideal for all surfaces.

The label containing technical data can be found at the base of

the aerial.

Technical features

• Gain (aerial + amplifier): UHF/VHF 40 ±2 db

• Power supply: 230-240 VAC 50-60 Hz

12 VDC for use in caravans, campers, boats etc.

• Power consumption: 3VA

• Impedance: 75 Ohms

• Gain control for enhanced picture quality

• Safety regulations according to EN 60065

15

















Connect Terrestrial signals (DVB-T).

To obtain the best reception for digital terrestrial signals its is

necessary that there are less as possible obstacles

(big trees/buildings etc.) between the transmitter and the antenna.

It is recommended that you put the antenna close to a window.

Set the gain control rotary-wheel in zero position and increase

the signal gain till you have obtained the optimal reception.

1

(See also the illustrations on page 15.)