Часы касио 3502 инструкция по применению

MA2008-EA© 2021 CASIO COMPUTER CO., LTD.Operation Guide 3502

About This Manual

• Depending on the model of your watch, display text appears either as dark figures on a light background, or light figures on a dark background. All sample displays in this manual are shown using dark figures on a light background.
• Button operations are indicated using the letters shown in the illustration.
• Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section.

Procedure LookupThe following is a handy reference list of all the operational procedures contained in this manual.

General Guide

• Press C to change from mode to mode.
• In any mode, press B to illuminate the display.
• In any mode, hold down C for about one second to return to the Timekeeping Mode.

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.To set the time and date

1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen.
2. Press © to move the flashing in the sequence shown below to select other settings.
3. When the setting you want to change is flashing, press D to change it as described below.

To toggle between 12-hour and 24-hour timekeepingIn the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for times in the range of noon to 11:59 p.m. and no indicator appears to the left of the hour digits for times in the range of midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all other modes.

To change this setting	Perform this button operation
Seconds	Press D to reset to 00.
Hour, Minutes, Year, Month, Day	Press D to increase the setting.

• Pressing D, while the seconds are in the range of 30 to 59, resets them to 00 and adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.4. Press A to exit the setting screen.
• The day of the week is automatically displayed in accordance with the date(year, month, and day) settings.
• The year can be set in the range of 2000 to 2099.
• The watch’s built-in full automatic calendar automatically makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s battery replaced.

AlarmsYou can set up five independent multi-function alarms with hour, minutes, month, and day. When an alarm is turned on, the alarm tone sounds when the alarm time is reached. One of the alarms has a snooze feature. You can also turn on an Hourly Time Signal that causes the watch to beep every hour on the hour.

• There are five alarms numbered 1 through 5. The Hourly Time Signal screen is indicated by:00.
• All of the operations in this section are performed in the Alarm Mode, which you enter by pressing C (page E-4).

Alarm Types

The alarm type is determined by the settings you make, as described below.

• Daily alarmSet the hour and minutes for the alarm time. This type of setting causes the alarm to sound every day at the time you set it.
• Date alarmSet the month, day, hour, and minutes for the alarm time. This type of setting causes the alarm to sound at a specific time, on the specific date you set.
• 1-Month alarmSet the month, hour, and minutes for the alarm time. This type of setting causes the alarm to sound every day at the time you set, only during the month you set.
• Monthly alarmSet the day, hour, and minutes for the alarm time. This type of setting causes the alarm to sound every month at the time you set, on the day you set.

1. In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed.• Alarm 1 has a snooze feature.•  The snooze alarm operation repeats every five minutes.
2.  After you select an alarm, hold down A until the hour setting of the alarm time starts to flash, which indicates the setting screen. x This operation automatically turns on the alarm.
3. Press C to move the flashing in the sequence shown below to select other settings.
4. While a setting is flashing, press D to increase it.• To set an alarm that does not include a month (Daily alarm, Monthly alarm), set ­ for the month. Press D until the ­ mark appears (between 12 and 1) while the month setting is flashing.•  To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set ­ ­ for the day. Press D until the ­ ­ mark appears (between the end of the month and 1) while the day setting is flashing.•  When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. or p.m. (P indicator).
5. Press A to exit the setting screen.

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation has been performed a total of seven times, every five minutes, until you turn the alarm off or change it to a one-time alarm (page E-14).

• To stop the alarm tone after it starts to sound, press any button.
• Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation. Displaying the Timekeeping Mode setting screen (page E-6) Displaying the Alarm 1 setting screen (page E-11)To test the alarm
• In the Alarm Mode, hold down D to sound the alarm.

To turn Alarms 2 through 5 and the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select alarm number 2 through 5, or the Hourly Time Signal (:00).
2. Press A to toggle it on and off.

• The on/off status of Alarms 2 through 5 and the Hourly Time Signal is shown by indicators.
• The alarm on indicators and Hourly Time Signal on indicator are displayed in all modes. Alarm on indicator
• While an alarm is sounding, the applicable alarm on indicator flashes on the display.

To select the operation of Alarm 1

1. In the Alarm Mode, use D to select Alarm 1.
2. Press A to cycle through the available settings in the sequence shown below.

Snooze on indicator (SNZ) and Alarm 1 on the indicator

• The snooze on indicator (SNZ) and Alarm 1 on indicator are displayed in all modes.
• The snooze-on indicator (SNZ) flashes during the 5-minute intervals between alarms.
• The alarm indicator (Alarm 1 on and/or snooze on) flashes while the alarm is sounding.

Countdown Timer

The countdown timer can be set within a range of one minute to 24 hours. An alarm sounds when the countdown reaches zero.

• You can also select auto-repeat, which automatically restarts the countdown from the original value you set whenever zero is reached.
• All of the operations in this section are performed in the Countdown Timer Mode, which you enter by pressing C (page E-5).To use the countdown timer Press D while in the Countdown Timer Mode to start the countdown timer.
• When the end of the countdown is reached and auto-repeat is turned off, the alarm sounds for 10 seconds or until you stop it by pressing any button. The countdown time is automatically reset to its starting value after the alarm stops.
• The countdown timer measurement operation continues even if you exit the Countdown Timer Mode.
• Press D while a countdown operation is in progress to pause it. Press D again to resume the countdown.
• To completely stop a countdown operation, first, pause it (by pressing D), and then press A. This returns the countdown time to its starting value.

To set the countdown start time

1. In the Countdown Timer Mode, hold down A until the hours setting of the countdown start time starts to flash, which indicates the setting screen.
2. Press © to move the flashing between the hours and minutes settings.
3. While a setting is flashing, use D to increase it. x To set the starting value of the countdown time to 24 hours, set 0:00.
4. Press A to exit the setting screen.

To turn auto-repeat on and off

1. In the Countdown Timer Mode, hold down A until the hours setting of the countdown start time starts to flash, which indicates the setting screen.
2. Press B to toggle auto-repeat on (A.RPT displayed) and off (A.RPT not displayed).
3. Note that pressing B in the above operation also turns on the backlight.
4. When the end of the countdown is reached while the auto- Auto-repeat indicator repeat is on, the alarm sounds, but the countdown restarts from the beginning without stopping. You can stop the countdown by pressing D and manually reset to the start time by pressing A.
5. The auto-repeat indicator appears in the Countdown Timer Mode only.

Stopwatch

The stopwatch lets you measure elapsed time, split times, and two finishes.

• The display range of the stopwatch is 23 hours, 59 minutes, 59.99 seconds.
• The stopwatch continues to run, restarting from zero after it reaches its limit until you stop it.
• An ongoing elapsed time measurement operation will continue internally even if you change to another mode. However, if you exit the Stopwatch Mode while a split time is displayed, the split time will not be displayed when you return to the Stopwatch Mode.
• All of the operations in this section are performed in the Stopwatch Mode, which you enter by pressing C (page E-5).

To measure times with the stopwatch Elapsed time

Dual Time

The Dual Time Mode lets you keep track of time in a different time zone.

• In the Dual Time Mode, the second count is synchronized with the second count of the Timekeeping Mode.

To set the Dual Time 

1. Press © to enter the Dual Time Mode (page E-5).
2. In the Dual Time Mode, hold down A until the hour setting starts to flash, which indicates the setting screen.
3. Press © to change the selection in the following sequence.
4. Press D to increase the setting. 5. Press A to exit the setting screen.

ReferenceThis section contains more detailed and technical information about watch operation. It also contains important precautions and notes about the various features and functions of this watch.Auto return featuresIf you leave a screen with flashing digits for two or three minutes without performing any operation, the watch automatically saves any settings you have made up to that point and exits the setting screen.Data and Setting ScrollingThe D button is used to scroll through setting screen data on the display. Holding down this button during a scroll operation scrolls through the data at high speed.Backlight Precautions

• The illumination provided by the backlight may be hard to see when viewed under direct sunlight.
• The backlight automatically stops illuminating whenever an alarm sounds.
• Frequent use of the backlight shortens the battery life.

Specifications

report this ad

Accuracy at normal temperature: ±30 seconds a monthTimekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week Time system: Switchable between 12-hour and 24-hour formats Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099 Alarms: 5 Multi-function Calendar System: Full Auto-calendar pre-programmed from the year 2000 to 2099Alarms: 5 Multi-function* alarms (1 with snooze feature), Hourly Time Signal * Alarm type: Daily alarm, date alarm, 1-month alarm, monthly alarmCountdown TimerMeasuring unit: 1 secondInput range: 1 minute to 24 hours (1-minute increments and 1-hour increments)Other: Auto-repeat functionStopwatchMeasuring unit: 1/100 of a secondMeasuring capacity: 23:59’59.99″Measuring modes: Elapsed time, split time, two finishesDual Time: Hour, minutes, seconds, p.m. (P)Other: LED (light-emitting diode) backlightBattery: One lithium battery (Type: CR2032)Approximately 10 years on type CR2032 (assuming alarm operation 10 sec./day, and one backlight operation 1.5 sec./day)Specifications are subject to change without notice.

Operation Guide 3502

E-9

Alarms

You can set up to five independent multi-function alarms

with hour, minutes, month, and day. When an alarm is

turned on, the alarm tone sounds when the alarm time is

reached. One of the alarms has a snooze feature.

You can also turn on an Hourly Time Signal that causes

the watch to beep every hour on the hour.

x There are five alarms numbered 1 through 5. The

Hourly Time Signal screen is indicated by :00.

x All of the operations in this section are performed

in the Alarm Mode, which you enter by pressing C

(page E-4).

Alarm date

(Month – Day)

Alarm time

(Hour : Minutes)

Alarm number

E-8

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and

24-hour timekeeping.

x With the 12-hour format, the P (PM) indicator appears to the left of the hour

digits for times in the range of noon to 11:59 p.m. and no indicator appears to

the left of the hour digits for times in the range of midnight to 11:59 a.m.

x With the 24-hour format, times are displayed in the range of 0:00 to 23:59,

without any indicator.

x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

E-7

3. When the setting you want to change is flashing, press D to change it as

described below.

To change this setting Perform this button operation

Seconds

Press D to reset to 00.

Hour, Minutes, Year, Month, Day

Press D to increase the setting.

x Pressing D while the seconds are in the range of 30 to 59 resets them to 00

and adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4. Press A to exit the setting screen.

x The day of the week is automatically displayed in accordance with the date

(year, month, and day) settings.

x The year can be set in the range of 2000 to 2099.

x The watch’s built-in full automatic calendar automatically makes allowances for

different month lengths and leap years. Once you set the date, there should be

no reason to change it except after you have the watch’s battery replaced.

E-6

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

CC

C

Seconds Hour Minutes

Day YearMonth

CC

C

Hour : Minutes

Seconds

Month – Day

Day of week

PM indicator

E-5

Countdown Timer

Mode

CC

C

Stopwatch Mode Dual Time Mode

x In any mode, hold down C for about one second to return to the Timekeeping

Mode.

E-4

General Guide

x Press C to change from mode to mode.

x In any mode, press B to illuminate the display.

Timekeeping Mode Alarm Mode

C

C

E-3

To set the Dual Time …………………………………………………………………………………E-21

To turn on the backlight ……………………………………………………………………………E-22

E-2

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To set the time and date …………………………………………………………………………….. E-6

To toggle between 12-hour and 24-hour timekeeping ………………………………….E-8

To set an alarm time …………………………………………………………………………………E-11

To test the alarm ………………………………………………………………………………………E-13

To turn Alarms 2 through 5 and the Hourly Time Signal on and off ……………..E-14

To select the operation of Alarm 1 …………………………………………………………….E-15

To use the countdown timer …………………………………………………………………….. E-16

To set the countdown start time ……………………………………………………………….E-17

To turn auto-repeat on and off ………………………………………………………………….E-18

To measure times with the stopwatch ……………………………………………………….E-20

E-1

Contents

General Guide ……………………………………………………………………………………………. E-4

Timekeeping ………………………………………………………………………………………………E-6

Alarms………………………………………………………………………………………………………..E-9

Countdown Timer …………………………………………………………………………………….. E-16

Stopwatch ……………………………………………………………………………………………….. E-19

Dual Time …………………………………………………………………………………………………E-21

Backlight ………………………………………………………………………………………………….E-22

Reference ………………………………………………………………………………………………… E-23

Specifications …………………………………………………………………………………………..E-25

Operating Precautions ……………………………………………………………………………… E-27

User Maintenance …………………………………………………………………………………….E-37

E

About This Manual

x Depending on the model of your watch, display text

appears either as dark figures on a light background, or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

x Button operations are indicated using the letters shown

in the illustration.

x Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

x To ensure that this watch provides you with the years

of service for which it is designed, carefully read and

follow the instructions under “Operating Precautions”

and “User Maintenance”.

x Be sure to keep all user documentation handy for future

reference.

MA2008-EA

© 2021 CASIO COMPUTER CO., LTD.

Need a manual for your Casio Collection AE-1500WH-8BVEF Watch? Below you can view and download the PDF manual for free. There are also frequently asked questions, a product rating and feedback from users to enable you to optimally use your product. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Rating

Let us know what you think about the Casio Collection AE-1500WH-8BVEF Watch by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with this Casio product?
Yes No

5 votes

Frequently Asked Questions

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

My mechanical watch runs fast, what can I do? Verified
This might be caused by exposure to a magnetic field. It can be solved by a demagnetisation process performed by a professional watchmaker.

This was helpful (612)

A battery in my device is oxidized, can I still safely use it? Verified
Ja, the device can still be safely used. Firstly, remove the oxidizd battery. Never use bare hands to do this. Then clean the battery compartment with a cotton swab dipped in vinegar or lemon juice. Let it dry and insert new batteries.

This was helpful (583)

What do AM and PM stand for? Verified
AM stands for Ante Meridiem and indicates that the time is before midday. PM stands for Post Meridiem and indicates that the time is past midday.

This was helpful (540)

What is a ‘Chronograph’? Verified
A ‘Chronograph’ is literally a ‘writer of time’. The term is used to describe clocks and watches that tell the time of day as well as measure a certain period of time, like a stopwatch.

This was helpful (473)

What is a quartz movement? Verified
Watches and clocks with a quartz movement are driven by a battery. This sends an electric current through quartz crystals that will vibrate. These vibrations are passed on to the movement. Because the vibrations have a fixed frequency, watches and clocks with a quartz movement are extremely precise.

This was helpful (319)

What is GMT? Verified
GMT stands for Greenwich Mean Time (sometimes called UTC, standing for Coordinated Universal Time). It is the time for the longitude 0, that passes through Greenwich near London.

This was helpful (318)

There is moisture on the inside of the glass of my Casio watch, what should I do? Verified
Casio states that if the moisture appeared after an extreme change in temperature and disappears relatively quickly afterwards, there is probably nothing wrong. If the moisture does not disappear, you should have your watch repaired as soon as possible.

This was helpful (41)