Epson l486 инструкция по эксплуатации

User’s Guide

NPD5531-01 EN

User’s Guide

Copyright

Copyright

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of
Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained
herein. Neither is any liability assumed for damages resulting from the use of the information herein.
information contained herein is designed only for use with this Epson product. Epson is not responsible for any
use of this information as applied to other products.

Neither Seiko Epson Corporation nor its aliates shall be liable to the purchaser of this product or third parties for
damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or
abuse of this product or unauthorized modications, repairs, or alterations to this product, or (excluding the U.S.)
failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation and its aliates shall not be liable for any damages or problems arising from the use of
any options or any consumable products other than those designated as Original Epson Products or Epson
Approved Products by Seiko Epson Corporation.

e

Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that
occurs from the use of any interface cables other than those designated as Epson Approved Products by Seiko
Epson Corporation.

© 2016 Seiko Epson Corporation. All rights reserved.

contents of this manual and the

e

specications

of this product are subject to change without notice.

2

User’s Guide

Trademarks

Trademarks

❏ EPSON® is a registered trademark, and EPSON EXCEED YOUR VISION or EXCEED YOUR VISION is a

trademark of Seiko Epson Corporation.

❏ PRINT Image Matching™ and the PRINT Image Matching logo are trademarks of Seiko Epson Corporation.

Copyright © 2001 Seiko Epson Corporation. All rights reserved.

❏ Epson Scan 2 soware is based in part on the work of the Independent JPEG Group.

❏

libti

Copyright © 1988-1997 Sam

Copyright © 1991-1997 Silicon Graphics, Inc.

Permission to use, copy, modify, distribute, and sell this soware and its documentation for any purpose is
hereby granted without fee, provided that (i) the above copyright notices and this permission notice appear in
all copies of the soware and related documentation, and (ii) the names of Sam Leer and Silicon Graphics
may not be used in any advertising or publicity relating to the soware without the specic, prior written
permission of Sam Leer and Silicon Graphics.

THE SOFTWARE IS PROVIDED «AS-IS» AND WITHOUT WARRANTY OF ANY KIND, EXPRESS,
IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED
OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Leer

❏ SDXC Logo is a trademark of SD-3C, LLC.

❏ Microso®, Windows®, and Windows Vista® are registered trademarks of Microso Corporation.

❏ Apple, Macintosh, Mac OS, OS X, Bonjour, Safari, iPad, iPhone, iPod touch, and iTunes are trademarks of Apple

Inc., registered in the U.S. and other countries. AirPrint and the AirPrint logo are trademarks of Apple Inc.

❏ Google Cloud Print™, Chrome™, Chrome OS™, and Android™ are trademarks of Google Inc.

❏ Adobe and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the

United States and/or other countries.

❏ Intel

❏ General Notice: Other product names used herein are for identication purposes only and may be trademarks

is a registered trademark of Intel Corporation.

®

of their respective owners. Epson disclaims any and all rights in those marks.

3

User’s Guide

Contents

Contents

Copyright

Trademarks

About This Manual

Introduction to the Manuals……………….8

Marks and Symbols…………………….8

Descriptions Used in this Manual……………9

Operating System References………………9

Important Instructions

Safety Instructions…………………….10

Printer Advisories and Warnings………….. 11

Advisories and Warnings for Setting Up/

Using the Printer……………………11
Advisories and Warnings for Using the

Printer with a Wireless Connection………..12
Advisories and Warnings for Using Memory

Cards………………………….. 12
Advisories and Warnings for Using the LCD

Screen…………………………..12

Protecting Your Personal Information………..12

Checking the Network Status Using Network

Icon…………………………… 26

Printing a Network Connection Report……..27

Printing a Network Status Sheet………….31

Replacing or Adding New Access Points………31

Changing the Connection Method to a Computer. . 32

Disabling Wi-Fi from the Control Panel……….33

Disconnecting Wi-Fi Direct (Simple AP)

connection from the Control Panel………….33

Restoring the Network Settings from the

Control Panel………………………. 34

Loading Paper

Paper Handling Precautions………………35

Available Paper and Capacities…………….36

List of Paper Types…………………..36

Loading Paper in the Rear Paper Feed………..37

Placing Originals on the Scanner
Glass

Placing Multiple Photos for Scanning at the

Same Time………………………….42

Printer Basics

Part Names and Functions……………….13

Control Panel………………………. 15

Buttons………………………….15

Guide to the LCD Screen………………16

Network Settings

Network Connection Types……………… 20

Wi-Fi Connection………………….. 20

Wi-Fi Direct (Simple AP) Connection………20

Connecting to a Computer……………….21

Connecting to a Smart Device……………. 23

Making Wi-Fi Settings from the Control Panel. . . . .23

Making Wi-Fi Settings Manually………….23
Making Wi-Fi Settings by Push Button Setup. . . . 24
Making Wi-Fi Settings by PIN Code Setup

(WPS)…………………………..25
Making Wi-Fi Direct (Simple AP)

Connection Settings………………….26

Checking the Network Connection Status……..26

Inserting a Memory Card

Supported Memory Cards………………. 43

Inserting and Removing a Memory Card………43

Printing

Printing from the Control Panel……………45

Printing Photos by Selecting from a Memory

Card……………………………45
Printing Lined Paper, Calendars, and

Original Writing Paper………………..46

DPOF Printing……………………. 47

Menu Options for Print Photos Mode………47

Printing from a Computer……………….47

Printing Basics — Windows……………..47

Printing Basics — Mac OS X……………..49
Printing on 2-Sides (for Windows only). . . . . . . . 51

Printing Several Pages on One Sheet……….52

Printing to Fit the Paper Size…………….53
Printing Multiple Files Together (for

Windows Only)…………………….55

4

User’s Guide

Contents

Printing One Image on Multiple Sheets to

Create a Poster (for Windows Only)……….56

Printing Using Advanced Features……….. 62
Printing Photos Using Epson Easy Photo Print. . 64

Printing from Smart Devices…………….. 65

Using Epson iPrint…………………..65

Using AirPrint……………………..67

Canceling Printing…………………….67

Canceling Printing — Printer Button………..67

Canceling Printing — Windows………….. 67

Canceling Printing — Mac OS X…………..68

Copying

Menu Options for Copy Mode……………. 69

Scanning

Scanning Using the Control Panel…………..71

Scanning to a Computer……………….71

Scanning to a Computer (WSD)………….72

Scanning from a Computer……………….74

Scanning Using Epson Scan 2……………74

Scanning from Smart Devices……………..80

Installing Epson iPrint………………..80

Scanning Using Epson iPrint…………… 80

Relling Ink

Checking the Ink Levels…………………82

Checking the Ink Levels — Windows………..82

Checking the Ink Levels — Mac OS X……….82

Ink Bottle Codes……………………..83

Ink Bottle Handling Precautions……………83

Relling the Ink Tanks………………….84

Maintaining the Printer

Checking and Cleaning the Print Head……….88

Checking and Cleaning the Print Head —

Control Panel…………………….. 88
Checking and Cleaning the Print Head —

Windows…………………………89
Checking and Cleaning the Print Head —

Mac OS X………………………..89

Replacing Ink inside the Ink Tubes………….90

Replacing Ink inside the Ink Tubes — Windows. . .90
Replacing Ink inside the Ink Tubes — Mac OS X. . 90

Aligning the Print Head…………………91

Aligning the Print Head — Control Panel…….91

Aligning the Print Head — Windows………..91

Aligning the Print Head — Mac OS X……….92

Cleaning the Paper Path…………………92

Cleaning the Scanner Glass……………….93

Checking the Total Number of Pages Fed
rough

Saving Power………………………..94

the Printer……………………93

Checking the Total Number of Pages Fed

rough the Printer — Control Panel……….94
Checking the Total Number of Pages Fed
rough
Checking the Total Number of Pages Fed

rough the Printer — Mac OS X………….94

Saving Power — Control Panel……………95

Saving Power — Windows……………… 95

Saving Power — Mac OS X………………95

the Printer — Windows…………. 94

Network Service and Software
Information

Epson Connect Service………………….96

Web Cong…………………………96

Running Web Cong on a Web Browser. . . . . . . 97

Running Web Cong on Windows……….. 97

Running Web Cong on Mac OS X………..97

Windows Printer Driver…………………98

Guide to Windows Printer Driver…………99
Making Operation Settings for the Windows

Printer Driver……………………. 101

Mac OS X Printer Driver………………. 101

Guide to Mac OS X Printer Driver………..102
Making Operation Settings for the Mac OS X

Printer Driver……………………. 103

Epson Scan 2 (Scanner Driver)……………104

Epson Event Manager………………….104

Epson Easy Photo Print………………..105

E-Web Print (for Windows Only)…………. 105

EPSON Soware Updater. . . . . . . . . . . . . . . . . . . 105

Uninstalling Applications……………….106

Uninstalling Applications — Windows………106

Uninstalling Applications — Mac OS X……..107

Installing Applications…………………107

Updating Applications and Firmware………. 108

Updating the Printer’s Firmware using the

Control Panel……………………..109

Menu Options for Setup Mode

Menu Options for Maintenance………….. 110

5

User’s Guide

Contents

Menu Options for Printer Setup………….. 110

Menu Options for Network Settings……….. 111

Menu Options for Epson Connect Services……112

Menu Options for Google Cloud Print Services. . . 113

Menu Options for File Sharing……………113

Menu Options for Firmware Update………..113

Menu Options for Restore Default Settings…… 114

Solving Problems

Checking the Printer Status………………115

Checking Error Codes on the LCD Screen. . . . .115

Checking the Printer Status — Windows…….116

Checking Printer Status — Mac OS X……… 116

Removing Jammed Paper……………….116

Removing Jammed Paper from the Rear
Paper Feed. . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Removing Jammed Paper from Inside the

Printer………………………….117

Paper Does Not Feed Correctly. . . . . . . . . . . . . . . 119

Paper Jams……………………….119

Paper Feeds at a Slant………………..119
Several Sheets of Paper are Fed at a Time. . . . . . 119

No Paper Feeds……………………119

Paper Out Error Occurs………………120

Power and Control Panel Problems…………120

Power Does Not Turn On……………..120

Power Does Not Turn O……………..120

LCD Screen Gets Dark……………….120

Cannot Print from a Computer……………120

When You Cannot Make Network Settings……121

Cannot Connect from Devices Even ough

Network Settings are No Problem………..121
Checking the SSID Connected to the Printer. . . 123

Checking the SSID for the Computer………123

Suddenly the Printer Cannot Print over a

Network Connection………………….124

Suddenly the Printer Cannot Print Using a USB

Connection………………………..125

Cannot Print from an iPhone or iPad………. 125

Printing is Paused…………………… 125

Printout Problems……………………125

Printout is Scued or Color is Missing……..125

Banding or Unexpected Colors Appear…….126
Colored Banding Appears at Intervals of

Approximately 2.5 cm………………..126
Blurry Prints, Vertical Banding, or

Misalignment……………………..127

Print Quality is Poor…………………127

Paper Is Smeared or Scued……………128

Printed Photos are Sticky……………..129
Images or Photos are Printed in Unexpected

Colors………………………….129
Colors

Display…………………………129

Cannot Print Without Margins………….129
Edges of the Image are Cropped During

Borderless Printing………………….130
e Position, Size, or Margins of the Printout

Are Incorrect……………………..130
Printed Characters Are Incorrect or Garbled. . . 130

Printed Image Is Inverted…………..130

e

Mosaic-Like Patterns in the Prints………..131
Uneven Colors, Smears, Dots, or Straight

Lines Appear in the Copied Image………..131
Moiré (Cross-Hatch) Patterns Appear in the

Copied Image……………………. 131
An Image of the Reverse Side of the Original

Appears in the Copied Image…………..131
e Printout Problem Could Not be Cleared. . . 132

Other Printing Problems………………. 132

Printing Is Too Slow…………………132
Printing Slows Down Dramatically During

Continuous Printing…………………132
Cannot Cancel Printing from a Computer

Running Mac OS X v10.6.8…………….132

Cannot Start Scanning…………………133

Cannot Start Scanning when Using the

Control Panel……………………..134

Scanned Image Problems……………….134

Uneven Colors, Dirt, Spots, and so on Appear

when Scanning from the Scanner Glass…….134

e Image Quality Is Rough……………134
Oset Appears in the Background of Images. . . 134

Text is Blurred…………………….135
Moiré Patterns (Web-Like Shadows) Appear. . . 135
Cannot Scan the Correct Area on the

Scanner Glass……………………..135

Cannot Preview in umbnail…………. 136
Text is Not Recognized Correctly when

Saving as a Searchable PDF…………….136
Cannot Solve Problems in the Scanned Image. . 136

Other Scanning Problems……………….137

Scanning Speed Is Slow……………….137
Scanning Stops when Scanning to PDF/

Multi-TIFF……………………… 137

Other Problems……………………..138

Slight Electric Shock when Touching the

Printer………………………….138

Operation Sounds Are Loud……………138

from What You See on the

Dier

6

User’s Guide

Contents

Cannot Save the Data to a Memory Card……138
Application Is Blocked by a Firewall (for

Windows Only)……………………138
«?» Is Displayed on the Photo Selection Screen. . 138
A Message Prompting You to Reset the Ink

Levels is Displayed………………….139

Appendix

Technical Specications………………..140

Printer Specications………………..140

Scanner Specications……………….141

Interface Specications……………….141

Network Function List……………….141

Wi-Fi Specications…………………143

Security Protocol…………………..143

Supported ird Party Services………….143

External Storage Device Specications……..144

Supported Data Specications…………..144

Dimensions………………………145

Electrical Specications………………145

Environmental Specications…………..145

System Requirements………………..146

Regulatory Information………………..146

Standards and Approvals…………….. 146

Restrictions on Copying………………147

Transporting the Printer………………..147

Accessing a Memory Card From a Computer. . . . . 150

Where to Get Help……………………151

Technical Support Web Site…………….151

Contacting Epson Support…………….151

7

User’s Guide

About This Manual

About This Manual

Introduction to the Manuals

e following manuals are supplied with your Epson printer. As well as the manuals, see the help included in the
various Epson soware applications.

❏ Start Here (paper manual)

Provides you with information on setting up the printer, installing the soware, using the printer, solving
problems, and so on.

❏ User’s Guide (digital manual)

is manual. Provides overall information and instructions on using the printer, on network settings when
using the printer on a network, and on solving problems.

You can obtain the latest versions of the above manuals with the following methods.

❏ Paper manual

Visit the Epson Europe support website at http://www.epson.eu/Support, or the Epson worldwide support
website at http://support.epson.net/.

❏ Digital manual

Start EPSON Soware Updater on your computer. EPSON Soware Updater checks for available updates of
Epson soware applications and the digital manuals, and allows you to download the latest ones.

Related Information

& “EPSON Soware Updater” on page 105

Marks and Symbols

Caution:

!

Instructions that must be followed carefully to avoid bodily injury.

Important:

c

Instructions that must be observed to avoid damage to your equipment.

Note:

Provides complementary and reference information.

&

Related Information

Links to related sections.

8

User’s Guide

About This Manual

Descriptions Used in this Manual

❏ Screenshots of the printer driver and the Epson Scan 2 (scanner driver) screens are from Windows 10 or Mac

OS X v10.11.x. e content displayed on the screens varies depending on the model and situation.

❏ Illustrations of the printer used in this manual are examples only. Although there may be slight dierences

depending on the model, the method of operation is the same.

❏ Some of the menu items on the LCD screen vary depending on the model and settings.

Operating System References

Windows

In this manual, terms such as «Windows 10», «Windows 8.1», «Windows 8», «Windows 7», «Windows Vista», and
«Windows XP» refer to the following operating systems. Additionally, «Windows» is used to refer to all versions.

❏ Microso

❏

Microso

❏ Microso

❏ Microso

❏

Microso

❏ Microso

❏ Microso

Mac OS X

In this manual, «Mac OS X v10.11.x» refers to OS X El Capitan, «Mac OS X v10.10.x» refers to OS X Yosemite, «Mac
OS X v10.9.x» refers to OS X Mavericks, and «Mac OS X v10.8.x» refers to OS X Mountain Lion. Additionally, «Mac
OS X» is used to refer to «Mac OS X v10.11.x», «Mac OS X v10.10.x», «Mac OS X v10.9.x», «Mac OS X v10.8.x», «Mac
OS X v10.7.x», and «Mac OS X v10.6.8».

Wi n d o w s® 10 operating system

®

Wi n d o w s® 8.1 operating system

®

Wi n d o w s® 8 operating system

®

Wi n d o w s® 7 operating system

®

Wi n d o w s Vis ta® operating system

®

Wi n d o w s® XP operating system

®

Wi n d o w s® XP Professional x64 Edition operating system

®

9

User’s Guide

Important Instructions

Important Instructions

Safety Instructions

Read and follow these instructions to ensure safe use of this printer. Make sure you keep this manual for future
reference. Also, be sure to follow all warnings and instructions marked on the printer.

❏ Some of the symbols used on your printer are to ensure safety and proper use of the printer. Visit the following

Web site to learn the meaning of the symbols.

http://support.epson.net/symbols

❏ Use only the power cord supplied with the printer and do not use the cord with any other equipment. Use of

other cords with this printer or the use of the supplied power cord with other equipment may result in re or
electric shock.

❏ Be sure your AC power cord meets the relevant local safety standard.

❏ Never disassemble, modify, or attempt to repair the power cord, plug, printer unit, scanner unit, or options by

yourself, except as specically explained in the printer’s manuals.

❏ Unplug the printer and refer servicing to qualied service personnel under the following conditions:

e power cord or plug is damaged; liquid has entered the printer; the printer has been dropped or the casing
damaged; the printer does not operate normally or exhibits a distinct change in performance. Do not adjust
controls that are not covered by the operating instructions.

❏ Place the printer near a wall outlet where the plug can be easily unplugged.

❏ Do not place or store the printer outdoors, near excessive dirt or dust, water, heat sources, or in locations

subject to shocks, vibrations, high temperature or humidity.

❏ Take care not to spill liquid on the printer and not to handle the printer with wet hands.

❏ Keep the printer at least 22 cm away from cardiac pacemakers. Radio waves from this printer may adversely

aect the operation of cardiac pacemakers.

❏ If the LCD screen is damaged, contact your dealer. If the liquid crystal solution gets on your hands, wash them

thoroughly with soap and water. If the liquid crystal solution gets into your eyes, ush them immediately with
water. If discomfort or vision problems remain aer a thorough ushing, see a doctor immediately.

❏ Be careful not to touch any ink when you handle the ink tanks, ink tank caps, and opened ink bottles or ink

bottle caps.

❏ If ink gets on your skin, wash the area thoroughly with soap and water.

❏ If ink gets into your eyes, ush them immediately with water. If discomfort or vision problems continue aer

a thorough ushing, see a doctor immediately.

❏ If ink gets into your mouth, see a doctor right away.

❏ Do not tilt or shake an ink bottle aer removing its seal; this can cause leakage.

❏ Keep ink bottles and the ink tank unit out of the reach of children. Do not allow children to drink from or

handle the ink bottles and ink bottle cap.

10

User’s Guide

Important Instructions

Printer Advisories and Warnings

Read and follow these instructions to avoid damaging the printer or your property. Make sure you keep this
manual for future reference.

Advisories and Warnings for Setting Up/Using the Printer

❏ Do not block or cover the vents and openings in the printer.

❏ Use only the type of power source indicated on the printer’s label.

❏ Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and o.

❏ Avoid electrical outlets controlled by wall switches or automatic timers.

❏ Keep the entire computer system away from potential sources of electromagnetic interference, such as

loudspeakers or the base units of cordless telephones.

❏ e power-supply cords should be placed to avoid abrasions, cuts, fraying, crimping, and kinking. Do not place

objects on top of the power-supply cords and do not allow the power-supply cords to be stepped on or run over.
Be particularly careful to keep all the power-supply cords straight at the ends and the points where they enter
and leave the transformer.

❏ If you use an extension cord with the printer, make sure that the total ampere rating of the devices plugged into

the extension cord does not exceed the cord’s ampere rating. Also, make sure that the total ampere rating of all
devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.

❏ If you plan to use the printer in Germany, the building installation must be protected by a 10 or 16 amp circuit

breaker to provide adequate short-circuit protection and over-current protection for the printer.

❏ When connecting the printer to a computer or other device with a cable, ensure the correct orientation of the

connectors. Each connector has only one correct orientation. Inserting a connector in the wrong orientation
may damage both devices connected by the cable.

❏ Place the printer on a

will not operate properly if it is tilted at an angle.

❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down;

otherwise ink may leak.

❏ Allow space above the printer so that you can fully raise the document cover.

❏ Leave enough space in front of the printer for the paper to be fully ejected.

❏ Avoid places subject to rapid changes in temperature and humidity. Also, keep the printer away from direct

sunlight, strong light, or heat sources.

stable surface that extends beyond the base of the printer in all directions. e printer

at,

❏ Do not insert objects through the slots in the printer.

❏ Do not put your hand inside the printer during printing.

❏ Do not touch the white at cable and ink tubes inside the printer.

❏ Do not use aerosol products that contain

❏ Do not move the print head by hand; otherwise, you may damage the printer.

❏ Be careful not to trap your ngers when closing the scanner unit.

❏ Do not press too hard on the scanner glass when placing the originals.

❏ Do not continue printing when the ink level is below the lower line on the ink tank. Continued use of the

printer when the ink level is below the lower line could damage the printer. Epson recommends lling all ink
tanks to the upper line when the printer is not operating to reset the ink levels.

ammable

gases inside or around the printer. Doing so may cause

11

re.

User’s Guide

Important Instructions

❏ Always turn the printer o using the P button. Do not unplug the printer or turn o the power at the outlet

P

until the

❏ Before transporting the printer, make sure that the print head is in the home (far right) position.

❏ If you are not going to use the printer for a long period, be sure to unplug the power cord from the electrical

outlet.

light stops ashing.

Advisories and Warnings for Using the Printer with a Wireless
Connection

❏ Radio waves from this printer may negatively aect the operation of medical electronic equipment, causing

them to malfunction. When using this printer inside medical facilities or near medical equipment, follow
directions from the authorized personnel representing the medical facilities, and follow all posted warnings and
directions on the medical equipment.

❏ Radio waves from this printer may negatively aect the operation of automatically controlled devices such as

automatic doors or re alarms, and could lead to accidents due to malfunction. When using this printer near
automatically controlled devices, follow all posted warnings and directions on these devices.

Advisories and Warnings for Using Memory Cards

❏ Do not remove a memory card or turn o the printer while the memory card light is

❏ e methods for using memory cards vary according to card type. Be sure to refer to the manual packaged with

your memory card for details.

❏ Use only memory cards compatible with the printer.

Related Information

& “Supported Memory Card Specications” on page 144

ashing.

Advisories and Warnings for Using the LCD Screen

❏

LCD screen may contain a few small bright or dark spots, and because of its features it may have an uneven

e
brightness.

❏ Only use a dry, so cloth for cleaning. Do not use liquid or chemical cleaners.

❏ e exterior cover of the LCD screen could break if it receives a heavy impact. Contact your dealer if the

screen’s surface chips or cracks, and do not touch or attempt to remove the broken pieces.

are normal and do not indicate that it is damaged in any way.

ese

Protecting Your Personal Information

When you give the printer to someone else or dispose of it, erase all the personal information stored in the printer’s
memory by selecting Setup > Restore Default Settings > All Settings on the control panel.

12

User’s Guide

Printer Basics

Printer Basics

Part Names and Functions

Edge guide Feeds the paper straight into the printer. Slide to the

A

edges of the paper.

Rear paper feed Loads paper.

B

Paper support Supports loaded paper.

C

Feeder guard Prevents foreign substance from entering the printer.

D

Usually keep this guard closed.

Output tray Holds the ejected paper. Before printing, raise the

E

stopper to prevent the ejected paper from falling o
the tray.

Control panel Operates the printer.

F

13

User’s Guide

Printer Basics

Scanner unit Scans placed originals. Open when removing jammed

A

paper inside the printer.

Ink tube Supplies ink to the print head.

B

Ink tank unit Contains the ink tanks.

C

Ink reservoir tanks (Ink tanks) Supplies ink to the ink tubes.

D

Print head Fires ink.

E

Document cover Blocks external light while scanning.

A

Scanner glass Place the originals.

B

Memory card slot Insert a memory card.

C

14

User’s Guide

Printer Basics

AC inlet Connects the power cord.

A

USB port Connects a USB cable to connect with a computer.

B

Control Panel

You can change the angle of the control panel.

To lower the control panel, squeeze the lever on the back of the panel as shown below.

Buttons

15

User’s Guide

Printer Basics

A

B

C

D

E

u d l r

OK Use the u d l r buttons to select a menu, and press the OK button to run the selected menu.

Turns the printer on or o.

Do not turn o while the power light is ashing (while the printer is operating or processing
data).

Unplug the power cord when the power light is

Displays the home screen.

Stops the current operation or returns to the previous screen.

Starts an operation such as printing or copying.

o.

Guide to the LCD Screen

Menus and messages are displayed on the LCD screen. Select a menu or setting by pressing the u d l r buttons.

Guide to the Home Screen

following icons and menus are displayed on the home screen.

e

Icons that show the network status are displayed.

A

Indicates a problem with the printer’s wireless (Wi-Fi) network connection, or that the
printer is searching for a wireless (Wi-Fi) network connection.

Indicates that the printer is connected to a wireless (Wi-Fi) network.

The number of bars indicates the signal strength of the connection. The more bars there
are, the stronger the connection.

Indicates that a wireless (Wi-Fi) network is disabled, or that the printer is processing a
wireless network connection.

Indicates that Wi-Fi Direct is enabled.

Indicates that Wi-Fi Direct is disabled.

B

When l and r are displayed, you can scroll right or left by pressing the l or r button.

16

User’s Guide

Function icons and names are displayed as mode icons.

C

Printer Basics

Copy

Print Photos

Scan

Personal Stationery

Setup

Wi-Fi Setup Displays menus that allow you to set up the printer for use on a wireless network. This is a

Available buttons are displayed. In this example, you can proceed to the selected menu by pressing the OK button.

D

Enters Copy mode that allows you to copy a document.

Enters Print Photos mode that allows you to print photos on your memory card.

Enters Scan mode that allows you to scan a document or a photo.

Enters Personal Stationery mode that allows you to print original items, such as ruled
paper and calendars, using the photos on your memory card.

Enters Setup mode that allows you to make maintenance, printer setup, and network
settings.

shortcut to the following menu.

Setup > Network Settings > Wi-Fi Setup

Related Information

& “Copying” on page 69
& “Printing Photos by Selecting from a Memory Card” on page 45
& “Scanning Using the Control Panel” on page 71
& “Printing Lined Paper, Calendars, and Original Writing Paper” on page 46
& “Menu Options for Setup Mode” on page 110
& “Menu Options for Network Settings” on page 111

Entering Characters

To enter characters and symbols for network settings from the control panel, use the u, d, l, and r buttons.

u

Press the
to the next input position. When you have

e displayed screen varies depending on the setting items. e following is the screen for entering the password
for your Wi-Fi network.

or d button to select the character you want to enter, and then press the r button to move the cursor

nished

entering characters, press the OK button.

17

User’s Guide

Icons Descriptions

Switches the character type.

ABC: Uppercase characters

abc: Lowercase characters

123: Numbers and symbols

Printer Basics

u d

r

l

OK Enters the selected characters.

Selects the character to be entered.

Moves the cursor to the right.

Deletes a character to the left (backspace).

Returns to the previous screen.

Entering the Practice String «13By»

1. Press the button twice to switch the character type to 123.

2. Press the u button twice to select «1».

3. Press the

r

button once to move the cursor, and then press the u button four times to select «3».

18

User’s Guide

Printer Basics

4. Press the r button once to move the cursor, and then press the button to switch the character type to

u

ABC. Press the

5. Press the r button once to move the cursor, and then press the button to switch the character type to abc.

Press the

d

button twice to select «B».

button twice to select «y».

6. Press the OK button.

19

User’s Guide

Network Settings

Network Settings

Network Connection Types

Wi-Fi Connection

Connect the printer and the computer or smart device to the access point. is is the typical connection method
for home or oce networks where computers are connected by Wi-Fi through the access point.

Related Information

& “Connecting to a Computer” on page 21
& “Connecting to a Smart Device” on page 23
& “Making Wi-Fi Settings from the Control Panel” on page 23

Wi-Fi Direct (Simple AP) Connection

Use this connection method when you are not using Wi-Fi at home or at the oce, or when you want to connect
the printer and the computer or smart device directly. In this mode, the printer acts as an access point and you can
connect up to four devices to the printer without having to use a standard access point. However, devices directly
connected to the printer cannot communicate with each other through the printer.

20

User’s Guide

Network Settings

Note:

Wi-Fi Direct (Simple AP) connection is a connection method designed to replace Ad Hoc mode.

e printer can be connected by Wi-Fi and Wi-Fi Direct (Simple AP) connection simultaneously. However, if you
start a network connection in Wi-Fi Direct (Simple AP) connection when the printer is connected by Wi-Fi, the
Wi-Fi is temporarily disconnected.

Related Information

& “Making Wi-Fi Direct (Simple AP) Connection Settings” on page 26

Connecting to a Computer

We recommend using the installer to connect the printer to a computer. You can run the installer using one of the
following methods.

❏ Setting up from the website

Access the following website, and then enter the product name.

http://epson.sn

Go to Setup, and then click Download in the download and connect part. Click or double-click the
downloaded le to run the installer. Follow the on-screen instructions.

❏ Setting up using the soware disc (only for the models that come with a soware disc and users with computers

with disc drives.)

Insert the soware disc into the computer, and then follow the on-screen instructions.

Selecting the Connection Methods

Follow the on-screen instructions until the following screen is displayed, and then select the connection method of
the printer to the computer.

21

User’s Guide

❏ Wi n d o w s

Select the connection type and then click Next.

Network Settings

❏ Mac OS X

Select the connection type.

Follow the on-screen instructions. e necessary soware is installed.

22

User’s Guide

Network Settings

Connecting to a Smart Device

You can use the printer from a smart device when you connect the printer to the same Wi-Fi network (SSID) as the
smart device. To use the printer from a smart device, set up from the following website. Access to the website from
the smart device that you want to connect to the printer.

http://epson.sn > Setup

Note:

If you want to connect a computer and a smart device to the printer at the same time, we recommend connecting the
computer rst.

Making Wi-Fi Settings from the Control Panel

You can make network settings from the printer’s control panel. Aer connecting the printer to the network,
connect to the printer from the device that you want to use (computer, smart phone, tablet, and so on.)

Related Information

& “Making Wi-Fi Settings Manually” on page 23
& “Making Wi-Fi Settings by Push Button Setup” on page 24
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 25
& “Making Wi-Fi Direct (Simple AP) Connection Settings” on page 26

Making Wi-Fi Settings Manually

You can manually set up the information necessary to connect to an access point from the printer’s control panel.
To set up manually, you need the SSID and password for an access point.

Note:

If you are using an access point with its default settings, the SSID and password are on the label. If you do not know the SSID
and password, contact the person who set up the access point, or see the documentation provided with the access point.

1. Select Wi — F i S etup on the home screen, and then press the OK button.

2. Select Wi-Fi (Recommended), and then press the OK button.

3. Press the OK button.

4. Select Wi-Fi Setup Wizard, and then press the OK button.

23

User’s Guide

Network Settings

5. Select the SSID for the access point from printer’s control panel, and then press the OK button.

Note:

❏ If the SSID you want to connect to is not displayed on the printer’s control panel, select Search Again to update the

list. If it is still not displayed, select Other SSIDs, and then enter the SSID directly.

❏ If you do not know the SSID, check if it is written on the label of the access point. If you are using the access point

with its default settings, use the SSID written on the label.

6. Enter the password, and then press the OK button.

Select whether or not you print a network connection report aer nishing the settings.

Note:

❏ e password is case-sensitive.

❏ If you do not know the password, check if it is written on the label of the access point. If you are using the access point

with its default settings, use the password written on the label. e password may also be called a «Key», a
«Passphrase», and so on.

❏ If you do not know the password for the access point, see the documentation provided with the access point, or

contact the person who set it up.

❏ If you fail to connect, load paper, and then press the

button to print a network connection report.

Related Information

“Entering Characters” on page 17

&

“Checking the Network Connection Status” on page 26

&

“When You Cannot Make Network Settings” on page 121

&

Making Wi-Fi Settings by Push Button Setup

You can automatically set up a Wi-Fi network by pressing a button on the access point. If the following conditions
are met, you can set up by using this method.

❏

access point is compatible with WPS (Wi-Fi Protected Setup).

e

❏ e current Wi-Fi connection was established by pressing a button on the access point.

Note:

If you cannot nd the button or you are setting up using the soware, see the documentation provided with the access point.

1. Select Wi — F i S etup on the home screen, and then press the OK button.

2. Select Wi-Fi (Recommended), and then press the OK button.

3. Press the OK button.

4. Select Push Button Setup (WPS), and then press the OK button.

24

User’s Guide

Network Settings

5. Hold down the [WPS] button on the access point until the security light ashes.

If you do not know where the [WPS] button is, or there are no buttons on the access point, see the
documentation provided with your access point for details.

6. Press the OK button on the printer’s control panel. Follow the on-screen instruction

Note:

If connection fails, restart the access point, move it closer to the printer, and try again. If it still does not work, print a
network connection report and check the solution.

Related Information

& “Checking the Network Connection Status” on page 26
& “When You Cannot Make Network Settings” on page 121

hereaer.

Making Wi-Fi Settings by PIN Code Setup (WPS)

You can connect to an access point by using a PIN code. You can use this method to set up if an access point is
capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the access point.

1. Select Setup on the home screen, and then press the OK button.

2. Select Network Settings and then press the OK button.

3. Select Wi — F i S etup on the home screen and then press the OK button.

4. Select PIN Code (WPS) and then press the OK button.

5. Use your computer to enter the PIN code (an eight digit number) displayed on the printer’s control panel into
the access point within two minutes.

Note:

See the documentation provided with your access point for details on entering a PIN code.

6. Press the OK button.

Setup is complete when the setup completion message is displayed.

Note:

If connection fails, restart the access point, move it closer to the printer, and try again. If it still does not work, print a
connection report and check the solution.

25

User’s Guide

Network Settings

Related Information

& “Checking the Network Connection Status” on page 26
& “When You Cannot Make Network Settings” on page 121

Making Wi-Fi Direct (Simple AP) Connection Settings

is method allows you to connect the printer directly to computer or smart devices without an access point. e
printer acts as an access point.

Important:

c

When you connect from a computer or smart device to the printer using the Wi-Fi Direct (Simple AP) connection,
the printer is connected to the same Wi-Fi network (SSID) as the computer or smart device and the communication
is established between them. Since the computer or smart device is automatically connected to the other connectable
Wi-Fi network if the printer is turned o, it is not connected to the previous Wi-Fi network again if the printer is
turned on. Connect to the printer’s SSID for Wi-Fi Direct (Simple AP) connection from the computer or smart
device again. If you do not want to connect every time you turn the printer on or o, we recommend using Wi-Fi
network by connecting the printer to an access point.

1.

Select Wi-Fi S e tu p on the home screen, and then press the OK button.

2. Select Wi — F i D irec t , and then press the OK button.

3. Press the OK button.

4.

Press the OK button to start the setup.

5. Press the OK button.

6. Check the SSID and password displayed on the printer’s control panel. On the network connection screen of
the computer or smart device, select the SSID shown on the printer’s control panel to connect.

7. Enter the password displayed on the printer’s control panel on the computer or smart device.

8.

Aer the connection is established, press the OK button on the printer’s control panel.

9. Press the OK button.

Related Information

& “Checking the Network Connection Status” on page 26
& “When You Cannot Make Network Settings” on page 121

Checking the Network Connection Status

Checking the Network Status Using Network Icon

You can check the network connection status using the network icon on the printer’s home screen. e icon
changes depending on the connection type and strength of the radio wave.

26

User’s Guide

Network Settings

Related Information

& “Guide to the Home Screen” on page 16

Printing a Network Connection Report

You can print a network connection report to check the status between the printer and the access point.

1. Load papers.

2. Select Setup on the home screen, and then press the OK button.

3. Select Network Settings > Connection Check.

connection check starts.

e

x

4. Press the

button to print the network connection report.

If an error has occurred, check the network connection report, and then follow the printed solutions.

Related Information

& “Messages and Solutions on the Network Connection Report” on page 28

27

User’s Guide

Network Settings

Messages and Solutions on the Network Connection Report

Check the messages and error codes on the network connection report, and then follow the solutions.

a. Error code

b. Messages on the Network Environment

a. Error code

Code Solution

E-1 ❏ Make sure that the Ethernet cable is connected to the printer, a hub, or other network devices.

❏ Make sure that the hub or other network devices are turned on.

28

User’s Guide

Code Solution

Network Settings

E-2

E-3

E-7

E-5 Make sure the access point’s security type is set to one of the following. If it is not, change the security type on

❏ Make sure that the access point is turned on.

❏ Check that the computer or other devices are connected correctly to the access point.

❏ Place the printer close to the access point. Remove any obstacles between them.

❏ If you have entered the SSID manually, check if it is correct. Check the SSID from the Network Status part on

the network connection report.

❏ To establish a network using push button setup, check that the access point supports WPS. If it does not

support WPS, you cannot establish a network using push button setup.

❏ Check that only ASCII characters (alphanumeric characters and symbols) are used for the SSID. The printer

cannot display an SSID which contains any characters other than ASCII characters.

❏ Check the SSID and password before connecting to the access point. If you are using an access point with its

default settings, the SSID and password are on the label. If you do not know the SSID and password, contact
the person who set up the access point, or see the documentation provided with the access point.

❏ When you want to connect to an SSID generated using the tethering function on a smart device, check the

SSID and password in the documentation provided with the smart device.

❏ If the Wi-Fi connection is suddenly disconnected, check the following. If any of these are applicable, reset the

network settings using the installer. You can run it from the following website.

http://epson.sn > Setup

❏ Another smart device was added to the network using push button setup.

❏ The Wi-Fi network was set up using any method other than push button setup.

the access point, and then reset the printer’s network settings.

❏ WEP-64 bit (40 bit)

❏ WEP-128 bit (104 bit)

❏ WPA PSK (TKIP/AES)

❏ WPA2 PSK (TKIP/AES)

❏ WPA (TKIP/AES)

❏ WPA2 (TKIP/AES)

* : WPA PSK is also known as WPA Personal. WPA2 PSK is also known as WPA2 Personal.

E-6 ❏ Check if the MAC address ltering is disabled. If it is enabled, register the printer’s MAC address so that it is

not ltered. See the documentation provided with the access point for details. You can check the printer’s
MAC address from the Network Status part on the network connection report.

❏ If the access point’s shared authentication is enabled on the WEP security method, make sure the

authentication key and index are correct.

E-8 ❏ Enable DHCP on the access point when the printer’s Obtain IP Address is set to Auto.

❏ If the printer’s Obtain IP Address is set to Manual, the IP address you manually set is out of range (for

example: 0.0.0.0) and it is disabled. Set a valid IP address from printer’s control panel or Web Cong.

E-9 Check the following.

❏ Devices are turned on.

❏ You can access the Internet and other computers or network devices on the same network from the devices

you want to connect to the printer.

*

*

If it still does not work after checking the above, reset the network settings using the installer. You can run it
from the following website.

http://epson.sn > Setup

29

User’s Guide

Code Solution

E-10 Check the following.

❏ Other devices on the network are turned on.

❏ Network addresses (IP address, subnet mask, and default gateway) are correct if you have set the printer’s

Obtain IP Address to Manual.

Reset the network address if these are incorrect. You can check the IP address, subnet mask, and default
gateway from the Network Status part on the network connection report.

When DHCP is enabled, change the printer’s Obtain IP Address to Auto. If you want to set the IP address
manually, check the printer’s IP address from the Network Status part on the network connection report, and
then select Manual on the network settings screen. Set the subnet mask to [255.255.255.0].

E-11 Check the following.

❏ The default gateway address is correct when you set the printer’s TCP/IP Setup to Manual.

❏ The device that is set as the default gateway is turned on.

Set the correct default gateway address. You can check the default gateway address from the Network Status
part on the network connection report.

Network Settings

E-12 Check the following.

❏ Other devices on the network are turned on.

❏ The network addresses (IP address, subnet mask, and default gateway) are correct if you are entering them

manually.

❏ The network addresses for other devices (subnet mask and default gateway) are the same.

❏ The IP address does not conict with other devices.

If it still does not work after checking the above, try the following.

❏ Make network settings on the computer that is on the same network as the printer using the installer. You

can run it from the following website.

http://epson.sn > Setup

❏ You can register several passwords on an access point that uses the WEP security type. If several passwords

are registered, check if the rst registered password is set on the printer.

E-13 Check the following.

❏ Network devices such as an access point, hub, and router are turned on.

❏ The TCP/IP Setup for network devices has not been set up manually. (If the printer’s TCP/IP Setup is set

automatically while the TCP/IP Setup for other network devices is performed manually, the printer’s network
may dier from the network for other devices.)

If it still does not work after checking the above, try the following.

❏ Make network settings on the computer that is on the same network as the printer using the installer. You

can run it from the following website.

http://epson.sn > Setup

❏ You can register several passwords on an access point that uses the WEP security type. If several passwords

are registered, check if the rst registered password is set on the printer.

30

User’s Guide

b. Messages on the Network Environment

Message Solution

Network Settings

*Multiple network names (SSID) that
match your entered network name (SSID)
have been detected. Conrm network
name (SSID).

The Wi-Fi environment needs to be
improved. Turn the wireless router o and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router.

*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.

The same SSID may be set on several access points. Check the settings on the
access points, and change the SSID.

After moving the printer closer to the access point and removing any
obstacles between them, turn the access point on. If it still does not connect,
see the documentation supplied with the access point.

You can simultaneously connect up to four computers and smart devices in
Wi-Fi Direct (Simple AP) connection. To add another computer or smart
device, disconnect one of the connected devices

Related Information

& “Connecting to a Computer” on page 21
& “Web Cong” on page 96
& “When You Cannot Make Network Settings” on page 121

Printing a Network Status Sheet

rst.

You can check the detailed network information by printing it.

1.

Load papers.

2. Select Setup on the home screen.

3. Select Network Settings > Print Status Sheet.

4. Press the

x

button.

e network status sheet is printed.

Replacing or Adding New Access Points

If the SSID changes due to the replacement of an access point, or an access point is added and a new network
environment is established, re-set the Wi-Fi settings.

Related Information

& “Changing the Connection Method to a Computer” on page 32

31

User’s Guide

Network Settings

Changing the Connection Method to a Computer

Using the installer and re-set up in a

❏ Setting up from the website

Access the following website, and then enter the product name.

http://epson.sn

Go to Setup, and then click Download in the download and connect part. Click or double-click the
downloaded le to run the installer. Follow the on-screen instructions.

❏ Setting up using the

with disc drives.)

Insert the soware disc into the computer, and then follow the on-screen instructions.

Selecting Change the Connection Methods

Follow the on-screen instructions until the following screen is displayed.

❏ Wi n d o w s

Select Change or re-set the connection method on the Select Soware Installation screen, and then click Next.

soware

dierent

disc (only for the models that come with a

connection method.

soware

disc and users with computers

32

User’s Guide

Network Settings

❏ Mac OS X

Select how you want to connect the printer to your computer.

Disabling Wi-Fi from the Control Panel

When Wi-Fi is disabled, the Wi-Fi connection is disconnected.

1. Select Setup on the home screen.

2. Select Network Settings.

3.

Select Wi-Fi S e tu p.

4. Select Disable Wi-Fi.

5. Check the message, and then select Ye s .

Disconnecting Wi-Fi Direct (Simple AP) connection
from the Control Panel

Note:

When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specic device, disconnect from the device
instead of the printer.

1. Select Setup on the home screen.

2. Select Network Settings.

3. Select Wi — F i S etup.

33

User’s Guide

Network Settings

4. Select Wi — F i D irec t S etup.

5. Select Disable Wi-Fi Direct.

6.

Check the message, and then select Ye s .

Restoring the Network Settings from the Control
Panel

You can restore all network settings to their defaults.

1. Select Setup on the home screen.

2. Select Restore Default Settings > Network Settings.

3.

Check the message, and then select Ye s .

34

User’s Guide

Loading Paper

Loading Paper

Paper Handling Precautions

❏ Read the instruction sheets supplied with the paper.

❏ Fan and align the edges of the paper before loading. Do not fan or curl photo paper. Doing so may damage the

printable side.

❏ If the paper is curled, atten it or curl it slightly in the opposite direction before loading. Printing on curled

paper may cause paper jams and smears on the printout.

❏ Do not use paper that is wavy, torn, cut, folded, damp, too thick, too thin, or paper that has stickers stuck to it.

Using these types of paper causes paper jams and smears on the printout.

❏ Fan and align the edges of the envelopes before loading. When the stacked envelopes are pued up with air,

press them down to atten them before loading.

❏ Do not use envelopes that are curled or folded. Using these envelopes causes paper jams and smears on the

printout.

❏ Do not use envelopes with adhesive surfaces on the aps or window envelopes.

❏ Avoid using envelopes that are too thin, as they may curl during printing.

Related Information

& “Printer Specications” on page 140

35

User’s Guide

Loading Paper

Available Paper and Capacities

Epson recommends using genuine Epson paper to ensure high-quality printouts.

Genuine Epson Paper

Media Name Size Loading Capacity

(Sheets)

Epson Bright White Ink Jet Paper A4

Epson Premium Glossy Photo Paper A4, 13×18 cm (5×7 in.), 16:9

wide size (102×181 mm)
10×15 cm (4×6 in.)

Epson Matte Paper-Heavyweight A4 20 –

*2

Epson Photo Quality Ink Jet Paper

*1 For manual 2-sided printing, you can load up to 30 sheets for paper with one side already printed.

*2 Only printing from computer or smart device is available.

A4 80 –

*2

,

*1

80

20 –

Manual 2-Sided
Printing

✓

Note:

e availability of paper varies by location. For the latest information on paper available in your area, contact Epson
support.

Commercially Available Paper

Media Name Size Loading Capacity

(Sheets)

Manual 2-Sided
Printing

Plain paper

Envelope

*1 Only printing from computer or smart device is available.

*2 For manual 2-sided printing, you can load up to 30 sheets for paper with one side already printed.

*1

*1

Letter

, A4, B5*1, A5*1, A6

*1

Legal

, User Dened

Envelope #10, Envelope DL,
Envelope C6

*1

*1

Up to the line
indicated by the
triangle symbol on the

edge guide.

1

10 –

*2

Related Information

& “Technical Support Web Site” on page 151

List of Paper Types

To obtain optimum printing results, select the paper type that suits the paper.

✓

36

User’s Guide

Media Name Media Type

Loading Paper

Control Panel

Epson Bright White Ink Jet Paper

Epson Premium Glossy Photo Paper

Epson Matte Paper-Heavyweight

Epson Photo Quality Ink Jet Paper

Plain paper

Envelope Envelope Envelope

*1 For smart devices, these media types can be selected when printing using Epson iPrint.

*2 These paper types are compatible with Exif Print and PRINT Image Matching when printed by the printer driver. For more

information, see the documentation that came with the Exif Print or PRINT Image Matching compatible digital camera.

*2

*2

*2

*2

*2

plain papers plain papers

Prem. Glossy Epson Premium Glossy

Matte Epson Matte

Matte Epson Matte

plain papers plain papers

Printer Driver, Smart Device

*1

Loading Paper in the Rear Paper Feed

1. Open the feeder guard, extend the paper support, and then tilt it backwards.

2. Slide the edge guide to the le.

37

User’s Guide

Loading Paper

3. Load paper vertically along the right side of the rear paper feed with the printable side facing up.

Important:

c

Do not load more than the maximum number of sheets
above the line indicated by the triangle symbol on the edge guide.

❏ Envelopes

❏ Pre-punched paper

specied

for the paper. For plain paper, do not load

Note:

❏ Load a single sheet of dened size plain paper with binding holes at the le or right.

❏ Adjust the print position of your le to avoid printing over the holes.

38

User’s Guide

Loading Paper

4. Slide the edge guide to the edge of the paper, and then close the feeder guard.

5. Check the paper size and paper type settings displayed on the control panel. To use the settings, select

u

Conrm using the

Change using the

or d button, press the OK button, and then go to step 7. To change the settings, select

u

or d button, press the OK button, and then go to the next step.

Important:

c

e paper setting screen is not displayed if the paper is not loaded along the right side of the rear paper feed. An
error occurs when you start printing.

Note:

❏ When the Paper Setting Alert feature in the Printer Setup menu is enabled, a message is displayed if the registered

paper size and paper type settings

from the print settings.

dier

❏e paper setting screen is not displayed if you have disabled Paper

step 7. In this situation, you cannot print from an iPhone or iPad using AirPrint.

Setup > Printer Setup > Paper Source Settings > Paper Conguration

Conguration

39

in the following menus. Go to

User’s Guide

Loading Paper

6. On the paper size setting screen, select the paper size using the l or r button, and then press the OK button.
On the paper type setting screen, select the paper type in the same way, and then press the OK button.
Conrm the settings, and then press the OK button.

Note:

You can also display the paper size and paper type settings screen by selecting the following menus.

Setup > Printer Setup > Paper Source Settings > Paper Setup

7. Slide out the output tray and then raise the stopper.

Note:

Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.

Related Information

& “Paper Handling Precautions” on page 35
& “Available Paper and Capacities” on page 36
& “Menu Options for Printer Setup” on page 110

40

User’s Guide

Placing Originals on the Scanner Glass

Placing Originals on the Scanner Glass

Important:

c

When placing bulky originals such as books, prevent exterior light from shining directly onto the scanner glass.

1. Open the document cover.

2. Remove any dust or stains on the scanner glass.

3. Place the original face-down and slide it to the corner mark.

Note:

A range of 1.5 mm from the edges of the scanner glass is not scanned.

4.

Close the cover gently.

5. Remove the originals aer scanning.

Note:

If you leave the originals on the scanner glass for a long time, they may stick to the surface of the glass.

41

User’s Guide

Placing Originals on the Scanner Glass

Placing Multiple Photos for Scanning at the Same
Tim e

You can scan multiple photos at the same time and save each image in Photo Mode in Epson Scan 2 when you
select umbnail from the list at the top of the preview window. Place the photos 4.5 mm away from the
horizontal and vertical edges of the scanner glass, and place them at least 20 mm apart from each other. e photos
should be larger than 15×15 mm.

42

User’s Guide

Inserting a Memory Card

Inserting a Memory Card

Supported Memory Cards

*

miniSD

miniSDHC

microSD*

microSDHC

microSDXC

SD

SDHC

SDXC

*

*

*

* Attach an adapter to t the memory card slot. Otherwise, the card may get stuck.

Related Information

“Supported Memory Card

&

Specications

” on page 144

Inserting and Removing a Memory Card

1. Insert a memory card into the printer.

e printer starts reading the data and the light ashes. When reading is complete, the light stops ashing and
remains on.

Important:

c

❏ Insert a memory card straight into the printer.

❏e card should not be fully inserted. Do not try to force it all the way into the slot.

43

User’s Guide

Inserting a Memory Card

2. When you have nished using the memory card, make sure the light is not ashing, and then remove the card.

Important:

c

If you remove the memory card while the light is ashing, the data in the memory card may be lost.

Note:

If you access the memory card from a computer, you need to operate the computer to safely remove the removable
device.

Related Information

& “Accessing a Memory Card From a Computer” on page 150

44

User’s Guide

Printing

Printing

Printing from the Control Panel

Printing Photos by Selecting from a Memory Card

1. Load paper in the printer.

Important:

c

Make the paper settings on the control panel.

2. Insert a memory card into the printer.

Important:

c

Do not remove the memory card until you have

3. Enter Print Photos from the home screen using the l or r button, and then press the OK button.

4. Use the
printing more than one photo, repeat this procedure.

5. Press the OK button to display the print settings conrmation screen.

6.

To change the print settings, press the

setting items such as the paper size and the paper type, and change the settings using the
When you have

7. Press the

Related Information

& “Loading Paper in the Rear Paper Feed” on page 37
& “List of Paper Types” on page 36
& “Inserting a Memory Card” on page 43
& “Menu Options for Print Photos Mode” on page 47

l

or r button to select a photo, and use the u or d button to set the number of copies. When

d

button to display the setting screen. Use the u or d button to select

press the OK button.

x

button.

nished,

nished

printing.

l

or r button.

45

User’s Guide

Printing

Printing Lined Paper, Calendars, and Original Writing Paper

You can easily print lined paper, calendars, and original writing paper using the Personal Stationery menu.

1.

Load paper in the printer.

Important:

c

Make the paper settings on the control panel.

2. To print writing paper using a photo on your memory card, insert the memory card into the printer.

3. Enter Personal Stationery from the home screen using the

4.

Select a menu item using the

5.

Follow the on-screen instructions to print.

Related Information

& “Loading Paper in the Rear Paper Feed” on page 37
& “Inserting a Memory Card” on page 43
& “Menu Options for Printing Lined Paper, Calendars, and Original Writing Paper” on page 46

l

or r button, and then press the OK button.

Menu Options for Printing Lined Paper, Calendars, and Original Writing Paper

l

or r button, and then press the OK button.

Lined Papers

Prints some types of lined paper, graph paper, or music paper on A4 size paper.

Writing Papers

Prints some types of writing paper on A4 size paper with a photo from the memory card set as the
background. e photo is printed lightly so that it can be easily written on.

Calendar

Prints a weekly or monthly calender. Select the year and the month for the monthly calendar.

46