Фотоаппарат canon ixus 132 инструкция

Package Contents

Before use, make sure the following items are included in the package.

If anything is missing, contact your camera retailer.

* Contains software and PDF manuals (=35).

• A memory card is not included (=3).

Compatible Memory Cards

The following memory cards (sold separately) can be used, regardless of capacity.

•SD memory cards*

•SDHC memory cards*

•SDXC memory cards*

*Cards conforming to SD standards. However, not all memory cards have been verified to work with the camera.

Preliminary Notes and Legal Information

•Take and review some test shots initially to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that result in the failure of an image to be recorded or to be recorded in a way that is machine readable.

•Images recorded by the camera are intended for personal use. Refrain from unauthorized recording that infringes on copyright law, and note that even for personal use, photography may contravene copyright or other legal rights at some performances or exhibitions, or in some commercial settings.

•The camera warranty is valid only in the area of purchase. In case of camera problems while abroad, return to the area of purchase before contacting a Canon Customer Support Help Desk.

•Although the LCD monitor is produced under extremely highprecision manufacturing conditions and more than 99.99% of the pixels meet design specifications, in rare cases some pixels may be defective or may appear as red or black dots. This does not indicate camera damage or affect recorded images.

•The LCD monitor may be covered with a thin plastic film for protection against scratches during shipment. If covered, remove the film before using the camera.

•When the camera is used over an extended period, it may become warm. This does not indicate damage.

Contents: Basic Operations

4 Shoot

zzUse camera-determined settings (Auto Mode)…………………. 68

Safety Precautions

•Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly.

•The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment.

•Be sure to also check the guides included with any separately sold accessories you use.

Warning Denotes the possibility of serious injury or death.

•Do not trigger the flash in close proximity to people’s eyes.

Exposure to the intense light produced by the flash could damage eyesight. In particular, remain at least 1 meter (39 inches) away from infants when using the flash.

•Store this equipment out of the reach of children and infants.

Strap: Putting the strap around a child’s neck could result in asphyxiation.

•Use only recommended power sources.

•Do not attempt to disassemble, alter or apply heat to the product.

•Avoid dropping or subjecting the product to severe impacts.

•To avoid the risk of injury, do not touch the interior of the product if it has been dropped or otherwise damaged.

•Stop using the product immediately if it emits smoke, a strange smell, or otherwise behaves abnormally.

•Do not use organic solvents such as alcohol, benzine, or thinner to clean the product.

•Do not let the product come into contact with water (e.g. sea water) or other liquids.

• Do not allow liquids or foreign objects to enter the camera.

This could result in electrical shock or fire.

If liquids or foreign objects come into contact with the camera interior, immediately turn the camera off and remove the battery. If the battery charger becomes wet, unplug it from the outlet and

consult your camera retailer or a Canon Customer Support Help Desk.

•Use only the recommended battery.

•Do not place the battery near or in direct flame.

•Unplug the power cord periodically, and using a dry cloth, wipe away any dust and dirt that has collected on the plug, the exterior of the power outlet, and the surrounding area.

•Do not handle the power cord with wet hands.

•Do not use the equipment in a manner that exceeds the rated capacity of the electrical outlet or wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the outlet.

•Do not allow dirt or metal objects (such as pins or keys) to contact the terminals or plug.

The battery may explode or leak, resulting in electrical shock or fire. This could cause injury and damage the surroundings. In the event that a battery leaks and the battery electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.

• Turn the camera off in places where camera use is prohibited.

The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the camera in places where use of electronic devices is restricted, such as inside airplanes and medical facilities.

•Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs.

It is possible to suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on an audio CD player (music player). Additionally, this could damage the speakers.

Caution Denotes the possibility of injury.

•When holding the camera by the strap, be careful not to bang it, subject it to strong impacts or shocks, or let it get caught on other objects.

•Be careful not to bump or push strongly on the lens.

This could lead to injury or damage the camera.

• Be careful not to subject the screen to strong impacts.

If the screen cracks, injury may result from the broken fragments.

•When using the flash, be careful not to cover it with your fingers or clothing.

This could result in burns or damage to the flash.

•Avoid using, placing or storing the product in the following places:

—Places subject to direct sunlight

—Places subject to temperatures above 40 °C (104 °F)

—Humid or dusty areas

These could cause leakage, overheating or an explosion of the battery, resulting in electrical shock, fire, burns or other injuries.

High temperatures may cause deformation of the camera or battery charger casing.

•The slideshow transition effects may cause discomfort when viewed for prolonged periods.

`

Caution Denotes the possibility of damage to the equipment.

•Do not aim the camera at bright light sources (such as the sun on a clear day).

Doing so may damage the image sensor.

•When using the camera on a beach or at a windy location, be careful not to allow dust or sand to enter the camera.

This may cause the product to malfunction.

•In regular use, small amounts of smoke may be emitted from the flash.

This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit.

•Remove and store the battery when you are not using the camera.

If the battery is left inside the camera, damage caused by leakage may occur.

•Before you discard the battery, cover the terminals with tape or other insulators.

Contacting other metal materials may lead to fire or explosions.

•Unplug the battery charger from the power outlet after charging is complete, or when you are not using it.

•Do not place anything, such as cloth, on top of the battery

charger while it is charging.

Leaving the unit plugged in for a long period of time may cause it to overheat and distort, resulting in fire.

• Do not place the battery near pets.

Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or damage.

•Do not sit down with the camera in your pocket.

Doing so may cause malfunctions or damage the screen.

•When putting the camera in your bag, ensure that hard objects do not come into contact with the screen.

•Do not attach any hard objects to the camera.

Doing so may cause malfunctions or damage the screen.

Basic Guide

Gives basic instructions, from initial preparations to shooting, playback, and saving on a computer

Initial Preparations

Prepare for shooting as follows.

Attaching the Strap

zzThread the end of the strap through the strap hole (), and then pull the other end of the strap through the loop on the threaded end ().

Holding the Camera

zzPlace the strap around your

wrist.

zzWhen shooting, keep your arms close to your body and hold the camera securely to prevent it from moving. Do not rest your fingers on the flash.

zzAfter unplugging the battery charger, remove the battery by pushing it in () and up ().

•To protect the battery and keep it in optimal condition, do not charge it continuously for more than 24 hours.

•For battery chargers that use a power cord, do not attach the charger or cord to other objects. Doing so could result in malfunction or damage to the product.

•For details on charging time and the number of shots and recording time possible with a fully charged battery, see Number of Shots/ Recording Time, Playback Time (=320).

•Charged batteries gradually lose their charge, even when they are not used. Charge the battery on (or immediately before) the day of use.

•The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For power outlets in a different format, use a commercially available adapter for the plug. Never use an electrical transformer designed for traveling, which may damage the battery.

Inserting the Battery and Memory Card

Insert the included battery and a memory card (sold separately). Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera (=250).

1 Check the card’s writeprotect tab.

zzRecording is not possible on memory cards with a writeprotect tab when the tab is in the locked (downward) position. Slide the tab up until it clicks into the unlocked position.

2 Open the cover.

zzSlide the cover () and open it ().

• For guidelines on how many shots or hours of recording can be saved on one memory card, see “Number of 4:3 Shots per Memory Card” (=321).

Removing the Battery and Memory Card

Remove the battery.

zzOpen the cover and press the

battery lock in the direction of

the arrow.

XXThe battery will pop up.

Remove the memory card.

zzPush the memory card in until it clicks, and then slowly release it.

XXThe memory card will pop up.

Setting the Date and Time

Set the current date and time correctly as follows if the [Date/Time] screen is displayed when you turn the camera on. Information you specify this way is recorded in image properties when you shoot, and it is used when you manage images by shooting date or print images showing the date.

You can also add a date stamp to shots, if you wish (=83).

1 Turn the camera on. zzPress the power button.

XXThe [Date/Time] screen is displayed.

2 Set the date and time.

zzPress the <q><r> buttons to choose an option.

zzPress the <o><p> buttons to specify the date and time.

zzWhen finished, press the <m> button.

3 Set the home time zone.

zzPress the <q><r> buttons to choose your home time zone.

4 Finish the setup process.

zzPress the <m> button when finished. After a confirmation message, the setting screen is no longer displayed.

zzTo turn off the camera, press the power button.

•Unless you set the date, time, and home time zone, the [Date/Time] screen will be displayed each time you turn the camera on. Specify the correct information.

•To set daylight saving time (1 hour ahead), choose [] in step 2 and then choose [] by pressing the <o><p> buttons.

Changing the Date and Time

Adjust the date and time as follows.

1 Access the camera menu. zzPress the <n> button.

2 Choose [Date/Time].

zzMove the zoom lever to choose the [3] tab.

zzPress the <o><p> buttons to choose [Date/Time], and then press the <m> button.

3 Change the date and time.

zzFollow step 2 on =24 to adjust the settings.

zzPress the <n> button to close the menu.

• Date/time settings can be retained for about 3 weeks by the camera’s built-in date/time battery (backup battery) after the battery pack is removed.

•The date/time battery will be charged in about 4 hours once you insert a charged battery or connect the camera to an AC adapter kit (sold separately, =257), even if the camera is left off.

•Once the date/time battery is depleted, the [Date/Time] screen will be displayed when you turn the camera on. Follow the steps on =24 to set the date and time.

Display Language

Change the display language as needed.

1 Enter Playback mode. zzPress the <1> button.

2 Access the setting screen.

zzPress and hold the <m> button, and then immediately press the <n> button.

3 Set the display language.

zzPress the <o><p><q><r> buttons to choose a language, and then press the <m> button.

XXOnce the display language has been set, the setting screen is no longer displayed.

•The current time is displayed if you wait too long in step 2 after pressing the <m> button before you press the <n> button. In this case, press the <m> button to dismiss the time display and repeat step 2.

•You can also change the display language by pressing the <n> button and choosing [Language ] on the [3] tab.

Trying the Camera Out

Follow these instructions to turn the camera on, shoot still images or movies, and then view them.

Shooting (Smart Auto)

For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.

1 Turn the camera on. zzPress the power button.

XXThe startup screen is displayed.

2 Enter [A] mode. zzSet the mode switch to [A].

zzAim the camera at the subject. The camera will make a slight clicking noise as it determines the scene.

XXIcons representing the scene and image stabilization mode are displayed in the upper right of the screen.

XXFrames displayed around any detected subjects indicate that they are in focus.

Finish shooting.

zzPress the movie button again to stop shooting. The camera beeps twice as recording stops.

Viewing

After shooting images or movies, you can view them on the screen as follows.

1 Enter Playback mode. zzPress the <1> button. XXYour last shot is displayed.

2 Browse through your images.

zzTo view the previous image, press the <q> button. To view the next image, press the <r> button.

•To switch to Shooting mode from Playback mode, press the shutter button halfway.

Erasing the Images

You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered.

1Choose an image to erase.

zzPress the <q><r> buttons to choose an image.

2 Erase the image.

zzPress the <m> button, press the <o><p> buttons to choose [a], and then press the <m> button again.

zzAfter [Erase?] is displayed, press the <q><r> buttons to choose [Erase], and then press the <m> button.

XXThe current image is now erased.

zzTo cancel erasure, press the <q><r> buttons to choose [Cancel], and then press the <m> button.

• You can also erase all images at once (=169).

ELPH 130 IS IXUS 140 ELPH 120 IS IXUS 135

Software, PDF Manuals (on the included CD-ROM)

The software and PDF manuals on the included DIGITAL CAMERA Solution Disk (CD-ROM) (=2) are introduced below, with instructions for installation, and saving images to a computer.

Software

After installing the software on the CD-ROM, you can do the following things on your computer.

CameraWindow

zzImport images and change camera settings

ImageBrowser EX

zzManage images: view, search, and organize zzPrint and edit images

Auto Update Function

Using the software, you can update to the latest version, and download new functions via the Internet (some software

excluded). Be sure to install the software on a computer with an Internet connection so you can use this function.

• Internet access is required to use this function, and any ISP account charges and access fees must be paid separately.

PDF Manuals

Camera User Guide

zzRefer to this guide for a more in-depth understanding of camera operation.

Software Guide

zzRefer to this guide when using the software. The guide can be accessed from the help system of software (some software excluded).

*1 Wi-Fi image transfer to a computer requires Windows 8, Windows 7 SP1, Mac OS X 10.6.8, Mac OS X 10.7, or Mac OS X 10.8.2 or later.

*2 Information on computer models compatible with Mac OS X 10.8 is available on the Apple website.

*3 Includes Silverlight 5.1 (max. 100 MB). Additionally, in Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be installed. Installation may take some time, depending on computer performance.

• Check the Canon website for the latest system requirements, including supported OS versions.

Installing the Software

Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.

Using the software auto update function, you can update to the latest version and download new functions via the Internet

(some software excluded), so be sure to install the software on a computer with an Internet connection.

What you will need: zzComputer

zzInterface cable (=2)

zzIncluded CD-ROM (DIGITAL CAMERA Solution Disk) (=2)

1Insert the CD-ROM in the computer’s CD-ROM drive.

zzInsert the included CDROM (DIGITAL CAMERA Solution Disk) (=2) in the computer’s CD-ROM drive.

zzInsert the larger plug of the interface cable in the computer’s USB port. For

details about USB connections on the computer, refer to the computer user manual.

4 Install the files.

zzTurn the camera on, and follow the on-screen instructions

to complete the installation process.

XXThe software will connect to the Internet to update to the latest version and download new functions. Installation may take some time, depending on computer performance and the Internet connection.

zzClick [Finish] or [Restart] on the screen after installation and remove the CD-ROM when the desktop is displayed.

zzTurn the camera off and disconnect the cable.

• When not connected to the Internet, there are the following limitations.

—The screen in step 3 will not be displayed.

—Some functions may not be installed.

•The first time you connect the camera to the computer, drivers will be installed, so it may take a few minutes until camera images are accessible.

•If you have several cameras that were bundled with ImageBrowser EX on the included CD-ROMs, be sure to use each camera with their included CD-ROM and follow the on-screen installation instructions for each. Doing so will ensure that each camera will receive the correct updates and new functions via the auto update function.

Saving Images to a Computer

Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.

1Connect the camera to the computer.

zzFollow step 3 in “Installing the Software” (=39) to connect the camera to a computer.

2 Turn the camera on to access CameraWindow.

zzPress the <1> button to turn the camera on.

zzOn a Macintosh computer, CameraWindow is displayed when a connection is established between the camera and computer.

zzAfter images are saved, close CameraWindow, press the <1> button to turn the camera off, and unplug the cable.

zzFor instructions on viewing images on a computer, refer to the Software Guide (=36).

•In Windows 7, if the screen in step 2 is not displayed, click the [] icon in the taskbar.

•To start CameraWindow in Windows Vista or XP, click [Downloads Images From Canon Camera using Canon CameraWindow] on the screen displayed when you turn the camera on in step 2.

If CameraWindow is not displayed, click the [Start] menu and choose [All Programs] ► [Canon Utilities] ► [CameraWindow] ► [CameraWindow].

•On a Macintosh computer, if CameraWindow is not displayed after step 2, click the [CameraWindow] icon in the Dock (the bar at the bottom of the desktop).

• Although you can save images to a computer simply by connecting your camera to the computer without using the software, the following limitations apply.

—It may take a few minutes after you connect the camera to the computer until camera images are accessible.

—Images shot in vertical orientation may be saved in horizontal orientation.

—Image protection settings may be cleared from images saved to a computer.

—Some problems may occur when saving images or image information, depending on the operating system version, the software in use, or image file sizes.

—Some functions provided by the software may not be available, such as movie editing.

Using the PDF Manuals

Camera User Guide

zzAccess this guide by double-clicking the desktop shortcut icon.

Software Guide

zzThe guide can be accessed from the help system of software (some software excluded).

• It may not be possible to install the PDF manuals on computers that do not meet the system requirements (=37). However, you can view the manuals on a computer that supports Adobe Reader by copying the PDF files in the Readme folder on the CD-ROM directly to a convenient location on the computer.

ELPH 115 IS IXUS 132

Downloadable Software

The software available for download from the Canon website is introduced below, with instructions for installation and saving images to a computer.

Software

After downloading the software from the Canon website and installing it, you can do the following things on your computer.

CameraWindow

zzImport images and change camera settings

ImageBrowser EX

zzManage images: view, search, and organize zzPrint and edit images

• Internet access is required, and any ISP account charges and access fees must be paid separately.

Software Guide

Refer to this guide when using the software. The guide can be accessed from the help system of the software (some software excluded).

*1 Information on computer models compatible with Mac OS X 10.8 is available on the Apple website.

*2 Includes Silverlight 5.1 (max. 100 MB). Additionally, in Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be installed. Installation may take some time, depending on computer performance.

• Check the Canon website for the latest system requirements, including supported OS versions.

Installing the Software

Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.

What you will need: zzComputer

zzUSB cable (camera end: Mini-B)

1 Download the software.

zzWith a computer connected to the Internet, access http://www. canon.com/icpd/.

zzAccess the site for your country or region.

zzDownload the software.

2 Begin the installation. zzOpen the downloaded file.

zzClick [Easy Installation] and follow the on-screen instructions to complete the installation process.

3When a message is displayed prompting you to connect the camera, connect it to a computer.

zzWith the camera turned off, open the cover (). With the smaller plug of the USB cable in the orientation shown, insert the plug fully into the camera terminal ().

zzInsert the larger plug of the USB cable in the computer’s USB port. For details about USB connections on the computer, refer to the computer user manual.

4 Install the files.

zzTurn the camera on, and follow the on-screen instructions

to complete the installation process.

XXThe software will connect to the Internet to update to the latest version and download new functions. Installation may take some time, depending on computer performance and the Internet connection.

zzClick [Finish] or [Restart] on the screen after installation.

zzTurn the camera off and disconnect the cable.

• Using the software, you can update to the latest version, and download new functions via the Internet (some software excluded).

•The first time you connect the camera to the computer, drivers will be installed, so it may take a few minutes until camera images are accessible.

•Because the content and functions of software vary according to the camera model, if you have several cameras, you must use each camera to update to its latest version of the software.

Saving Images to a Computer

Windows 7 and Mac OS X 10.6 are used here for the sake of illustration. For other functions, refer to the help system of the relevant software (some software excluded).

1Connect the camera to the computer.

zzFollow step 3 in “Installing the Software” (=48) to connect the camera to a computer.

2 Turn the camera on to access CameraWindow.

zzPress the <1> button to turn the camera on.

zzOn a Macintosh computer, CameraWindow is displayed when a connection is established between the camera and computer.

zzFor Windows, follow the steps introduced below.

zzIn the screen that displays, click the [] link to modify the program.

Языки:

Как использовать наш сайт инструкций OnlineManuals.ru
Наша цель состоит в том, чтобы предоставить вам быстрый доступ к содержанию инструкции для цифрового фотоаппарата Canon IXUS 132 / IXUS 133 / IXUS 135.
С помощью онлайн просмотра, Вы можете быстро просмотреть содержимое инструкции и найти решение проблемы с цифрового фотоаппарата Canon IXUS 132 / IXUS 133 / IXUS 135.

Для Вашего удобства
Если листать руководство пользователя цифрового фотоаппарата Canon IXUS 132 / IXUS 133 / IXUS 135 прямо на сайте, не очень удобно для Вас, есть два возможных решения:

• Просмотр в полноэкранном режиме — легко просмотреть руководство пользователя (без загрузки его на свой компьютер), Вы можете использовать режим полноэкранного просмотра.
Для просмотра инструкции пользователя цифрового фотоаппарата Canon IXUS 132 / IXUS 133 / IXUS 135 на полном экране, используйте кнопку «Открыть в Pdf-viewer».

• Загрузка на компьютер — Вы можете также скачать Инструкция цифрового фотоаппарата Canon IXUS 132 / IXUS 133 / IXUS 135 на свой компьютер и сохранить его в файлах.

Многие люди предпочитают читать документы не на экране, а в печатной версии.
Возможность печати руководства пользователя также была предусмотрена на нашем сайте,
и вы можете использовать ее, нажав на иконку «печать» в Pdf-viewer.
Нет необходимости печатать все руководство цифрового фотоаппарата Canon IXUS 132 / IXUS 133 / IXUS 135, можно выбрать только нужные страницы инструкции.