Imc 101 m sc инструкция

1

w w w. m o x a . c o m

i n f o @ m o x a . c o m

Ethernet Media Converters

Industrial Ethernet-to-fiber media converters

The IMC-101 industrial media converters provide industrial-grade 
media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST 
connectors). The IMC-101 converters’ reliable industrial design is 
excellent for keeping your industrial automation applications running 
continuously, and each IMC-101 converter comes with a relay output 
warning alarm to help prevent damage and loss. The IMC-101 media 
converters are  designed for harsh industrial environments, such 

as in hazardous locations (Class 1, Division 2/Zone 2, DNV, and GL 
Certification), and comply with FCC, UL, and CE standards. The IMC-
101 series is available in models that support an operating temperature 
from 0 to 60°C, and an extended operating temperature from -40 to 
75°C. All IMC-101 series converters are subjected to a 100% burn-in 
test.

Introduction

Specifications

IMC-101 Series

›

10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X

›

Link Fault Pass-Through (LFP)

›

Power failure, port break alarm by relay output

›

Redundant power inputs

›

-40 to 75°C operating temperature range (T models)

›

Designed for hazardous locations (Class 1 Div. 2/Zone 2)

Technology

Standards: 
IEEE 802.3 for 10BaseT 
IEEE 802.3u for 100BaseT(X) and 100BaseFX

Interface

RJ45 Ports: 10/100BaseT(X)
Fiber Ports: 100BaseFX (SC/ST connectors)
LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 100M 
(Fiber port), FDX/COL (Fiber port)
DIP Switches: 100BaseFX Full/Half duplex selection, port break alarm 
mask
Alarm Contact: One relay output with current carrying capacity of 1 A 
@ 24 VDC

Optical Fiber

100BaseFX

Multi-mode

Single-mode

Wavelength

1300 nm

1310 nm

Max. TX

-14 dBm

0 dBm

Min. TX

-20 dBm

-5 dBm

RX Sensitivity

-32 dBm

-34 dBm

Link Budget

12 dB

29 dB

Typical Distance

5 km a

4 km b

40 km c

Saturation

-6 dBm

-3 dBm

a. 50/125 μm, 800 MHz*km fiber optic cable

b. 62.5/125 μm, 500 MHz*km fiber optic cable

c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable

Physical Characteristics

Housing: Metal, IP30 protection
Dimensions: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight: 630 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)

Environmental Limits

Operating Temperature: 
Standard Models: 0 to 60°C (32 to 140°F) 
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)

Power Requirements

Input Voltage: 12 to 45 VDC redundant inputs
Input Current: 160 mA @ 24 VDC
Connection: Removable terminal block
Overload Current Protection: 1.1 A
Reverse Polarity Protection: Present

Standards and Certifications

Safety: UL 508, UL 60950-1
Hazardous Location: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX 
Zone 2 Ex nC IIC
EMC: CE, FCC
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A