Msi b365m pro vh инструкция

Thank you for purchasing the MSI® B365M PRO-VD/ B365M PRO-VH/ B365M FIRE/ B365M WIND motherboard. This User Guide gives information about board layout, component overview, BIOS setup and software installation.

Safety Information

yThe components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly.

yEnsure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.

yHold the motherboard by the edges to avoid touching sensitive components.

yIt is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard.

yStore the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed.

yBefore turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.

yDo not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user.

yIf you need help during any installation step, please consult a certified computer technician.

yAlways turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component.

yKeep this user guide for future reference.

yKeep this motherboard away from humidity.

yMake sure that your electrical outlet provides the same voltage as is indicated on the PSU, before connecting the PSU to the electrical outlet.

yPlace the power cord such a way that people can not step on it. Do not place anything over the power cord.

yAll cautions and warnings on the motherboard should be noted.

yIf any of the following situations arises, get the motherboard checked by service personnel:

Liquid has penetrated into the computer.

The motherboard has been exposed to moisture.

The motherboard does not work well or you can not get it work according to user guide.

The motherboard has been dropped and damaged.

The motherboard has obvious sign of breakage.

yDo not leave this motherboard in an environment above 60°C (140°F), it may damage the motherboard.

Specifications

Continued from previous page

Mic in

Overview of Components

50.83mm* ATX_PWR1

JCI1

* Distance from the center of the CPU to the nearest DIMM slot.

CPU Socket

Please install the CPU into the CPU socket as shown below.

2

1

3

8 7

5

4 6

9

Important

yAlways unplug the power cord from the power outlet before installing or removing the CPU.

yPlease retain the CPU protective cap after installing the processor. MSI will deal with Return Merchandise Authorization (RMA) requests if only the motherboard comes with the protective cap on the CPU socket.

yWhen installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability.

yConfirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.

yOverheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.

yWhenever the CPU is not installed, always protect the CPU socket pins by covering the socket with the plastic cap.

yIf you purchased a separate CPU and heatsink/ cooler, Please refer to the documentation in the heatsink/ cooler package for more details about installation.

DIMM Slots

Please install the memory module into the DIMM slot as shown below.

2

Important

y To boot up the system successfully, always insert the memory module into DIMMA1 first.

y Due to chipset resource usage, the available capacity of memory will be a little less than the amount of installed.

y Please note that the maximum capacity of addressable memory is 4GB or less for 32-bit Windows OS due to the memory address limitation. Therefore, we

recommended that you to install 64-bit Windows OS if you want to install more than 4GB memory on the motherboard.

PCI_E1~3: PCIe Expansion Slots

PCI_E1: PCIe 3.0 x16 slot (CPU lanes)

PCI_E2: PCIe 3.0 x1 slot (PCH lanes)

PCI_E3: PCIe 3.0 x1 slot (PCH lanes)

Important

yIf you install a large and heavy graphics card, you need to use a tool such as MSI Gaming Series Graphics Card Bolster to support its weight to prevent deformation of the slot.

yFor a single PCIe x16 expansion card installation with optimum performance, using the PCI_E1 slot is recommended.

yWhen adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card’s documentation to check for any necessary additional hardware or software changes.

JFP1, JFP2: Front Panel Connectors

These connectors connect to the switches and LEDs on the front panel.

SATA1~6: SATA 6Gb/s Connectors

These connectors are SATA 6Gb/s interface ports. Each connector can connect to one SATA device.

SATA1

SATA2

SATA4

SATA6 SATA3

SATA5

Important

yThe SATA1 port will be unavailable when an M.2 SATA SSD module has been installed in the M.2 slot.

yPlease do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission otherwise.

ySATA cables have identical plugs on either sides of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes.

M2_1: M.2 Slot (Key M)

Please install the M.2 solid-state drive (SSD) into the M.2 slot as shown below.

4

Important

yIntel® RST only supports PCIe M.2 SSD with UEFI ROM.

yIntel® Optane™ Memory Ready.

ATX_PWR1, CPU_PWR1: Power Connectors

These connectors allow you to connect an ATX power supply.

Important

Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.

JUSB1, JUSB2: USB 2.0 Connectors

These connectors allow you to connect USB 2.0 ports on the front panel.

Important

yNote that the VCC and Ground pins must be connected correctly to avoid possible damage.

yIn order to recharge your iPad,iPhone and iPod through USB ports, please install MSI® DRAGON CENTER software.

JUSB3: USB 3.1 Gen1 Connector

These connectors allow you to connect USB 3.1 Gen1 ports on the front panel.

Important

Note that the Power and Ground pins must be connected correctly to avoid possible damage.

JAUD1: Front Audio Connector

This connector allow you to connect audio jacks on the front panel.

JCOM1: Serial Port Connector

This connector allows you to connect the optional serial port with bracket.

JTPM1: TPM Module Connector

This connector is for TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages.

EZ Debug LED

These LEDs indicate the status of the motherboard.

CPU — indicates CPU is not detected or fail.

DRAM — indicates DRAM is not detected or fail.

VGA — indicates GPU is not detected or fail.

BOOT — indicates booting device is not detected or fail.

CPU_FAN1, SYS_FAN1: Fan Connectors

Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. DC Mode fan connectors control fan speed by changing voltage. When you plug a 3-pin (Non-PWM) fan to a fan connector in PWM mode, the fan speed will always maintain at 100%, which might create a lot of noise. You can follow the instruction below to adjust the fan connector to PWM or DC Mode.

1

CPU_FAN1

1

SYS_FAN1

Switching fan mode and adjusting fan speed

You can switch between PWM mode and DC mode and adjust fan speed in BIOS > HARDWARE MONITOR.

Select PWM mode or DC mode

There are gradient points of the fan speed that allow you to adjust fan speed in relation to CPU temperature.

Important

Make sure fans are working properly after switching the PWM/ DC mode.

Pin definition of fan connectors

JCI1: Chassis Intrusion Connector

This connector allows you to connect the chassis intrusion switch cable.

Using chassis intrusion detector

1.Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis.

2.Close the chassis cover.

3.Go to BIOS > Security > Chassis Intrusion Configuration.

4.Set Chassis Intrusion to Enabled.

5.Press F10 to save and exit and then press the Enter key to select Yes.

6.Once the chassis cover is opened again, a warning message will be displayed on screen when the computer is turned on.

Resetting the chassis intrusion warning

1.Go to BIOS > Security > Chassis Intrusion Configuration.

2.Set Chassis Intrusion to Reset.

3.Press F10 to save and exit and then press the Enter key to select Yes.

JBAT1: Clear CMOS (Reset BIOS) Jumper

There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumpers to clear the CMOS memory.

Resetting BIOS to default values

1.Power off the computer and unplug the power cord

2.Use a jumper cap to short JBAT1 for about 5-10 seconds.

3.Remove the jumper cap from JBAT1.

4.Plug the power cord and power on the computer.

BIOS Setup

The default settings offer the optimal performance for system stability in normal conditions. You should always keep the default settings to avoid possible system damage or failure booting unless you are familiar with BIOS.

Important

yBIOS items are continuously update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be for reference only. You could also refer to the HELP information panel for BIOS item description.

yThe pictures in this chapter are for reference only and may vary from the product you purchased.

Entering BIOS Setup

Please refer the following methods to enter BIOS setup.

yPress Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot Menu message appears on the screen during the boot process.

yUse MSI DRAGON CENTER application. Click on GO2BIOS button and choose OK. The system will reboot and enter BIOS setup directly.

Function key

F1: General Help

F2: Add/ Remove a favorite item

F3: Enter Favorites menu

F4: Enter CPU Specifications menu

F5: Enter Memory-Z menu

F6: Load optimized defaults

F7: Switch between Advanced mode and EZ mode

F8: Load Overclocking Profile

F9: Save Overclocking Profile

F10: Save Change and Reset*

F12: Take a screenshot and save it to USB flash drive (FAT/ FAT32 format only). Ctrl+F: Enter Search page

* When you press F10, a confirmation window appears and it provides the modification information. Select between Yes or No to confirm your choice.

Resetting BIOS

You might need to restore the default BIOS setting to solve certain problems. There are several ways to reset BIOS:

yGo to BIOS and press F6 to load optimized defaults.

yShort the Clear CMOS jumper on the motherboard.

Important

Be sure the computer is off before clearing CMOS data. Please refer to the Clear CMOS jumper section for resetting BIOS.

Updating BIOS

Updating BIOS with M-FLASH

Before updating:

Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash drive.

Updating BIOS:

1.Press Del key to enter the BIOS Setup during POST.

2.Insert the USB flash drive that contains the update file into the computer.

3.Select the M-FLASH tab and click on Yes to reboot the system and enter the flash mode.

4.Select a BIOS file to perform the BIOS update process.

5.After the flashing process is 100% completed, the system will reboot automatically.

Updating the BIOS with MSI DRAGON CENTER

Before updating:

Make sure the LAN driver is already installed and the Internet connection is set properly.

Updating BIOS:

1.Install and launch MSI DRAGON CENTER.

2.Select BIOS Update.

3.Click on Scan button.

4.Click on Download icon to download and install the latest BIOS file.

5.Click Next and choose In Windows mode. And then click Next and Start to start updating BIOS.

6.After the flashing process is 100% completed, the system will restart automatically.

Installing OS, Drivers & Utilities

Please download and update the latest utilities and drivers at www.msi.com

Installing Windows® 10

1.Power on the computer.

2.Insert the Windows® 10 installation disc/USB into your computer.

3.Press the Restart button on the computer case.

4.Press F11 key during the computer POST (Power-On Self Test) to get into Boot Menu.

5.Select the Windows® 10 installation disc/USB from the Boot Menu.

6.Press any key when screen shows Press any key to boot from CD or DVD…

message.

7.Follow the instructions on the screen to install Windows® 10.

Installing Drivers

1.Start up your computer in Windows® 10.

2.Insert MSI® Driver Disc into your optical drive.

3.Click the Select to choose what happens with this disc pop-up notification, then select Run DVDSetup.exe to open the installer. If you turn off the AutoPlay feature from the Windows Control Panel, you can still manually execute the DVDSetup.exe from the root path of the MSI Driver Disc.

4.The installer will find and list all necessary drivers in the Drivers/Software tab.

5.Click the Install button in the lower-right corner of the window.

6.The drivers installation will then be in progress, after it has finished it will prompt you to restart.

7.Click OK button to finish.

8.Restart your computer.

Installing Utilities

Before you install utilities, you must complete drivers installation.

1.Open the installer as described above.

2.Click the Utilities tab.

3.Select the utilities you want to install.

4.Click the Install button in the lower-right corner of the window.

5.The utilities installation will then be in progress, after it has finished it will prompt you to restart.

6.Click OK button to finish.

7.Restart your computer.

MSI® B365M PRO-VD/ B365M PRO-VH/ B365M FIRE/ B365M WIND ., , BIOS.

y (ESD).

y . ,.

y .

y ESD. ESD ,.

y .

y .

y . ,.

y .

y .

y . y .

y PSU PSU.

y . . y .

y , .:.

.

..

.

y 60°C(140°F) . .

yCPU/y CPU/

yCPU/

LAN LED

50.83mm* ATX_PWR1

JCI1

* CPU DIMM

CPU

CPU CPU .

2

1

3

8 7

5

4 6

9

yCPU .

y, CPU . CPUMSI (RMA) .

yCPU , CPU . CPU.

yCPU .

yCPU CPU. CPU( ) .

yCPU , CPU..

yCPU / , /.

DIMM

DIMM .

2

yDIMMA1 .

y.

y4GB 32- (Windows OS). 4GB 64Windows OS .

PCI_E1~3: PCIe

PCI_E1: PCIe 3.0 x16 (CPU )

PCI_E2: PCIe 3.0 x1 slot (PCH )

PCI_E3: PCIe 3.0 x1 slot (PCH )

y,MSI Gaming Series Graphics Card Bolster.

yPCIe x16 PCI_E1.

y..

JFP1, JFP2:

LED .

SATA1~6: SATA 6Gb/s

SATA 6Gb/s . SATA

SATA1

SATA2

SATA4

SATA6 SATA3

SATA5

yM.2 M.2 SATA SSD SATA1 .

ySATA 90 . , .

ySATA ..

JUSB1, JUSB2: USB 2.0

USB 2.0 .

yVCC .

yUSB iPad,iPhone iPod MSI® SUPER CHARGER

.

JUSB3: USB 3.1 Gen1

USB 3.1 Gen1 .

.

JAUD1:

.

JTPM1: TPM

TPM (Trusted Platform Module) .TPM .

EZ LED

LED .

CPU — CPU .

DRAM — DRAM .

VGA — VGA .

BOOT — .

CPU_FAN1, SYS_FAN1:

PWM (Pulse Width Modulation) DC . PWM 12V. DC .PWM 3- (Non-PWM) , 100%

. PWM DC.

PWM 1

CPU_FAN1

DC 1

SYS_FAN1

PWM DC BIOS > HARDWARE MONITOR() .

PWM DC

CPU .

PWM/ DC , .

JCI1:

.

( )

1. JCI1 / . 2. .

3. BIOS > Security ( ) > Chassis Intrusion Configuration( )

.

4. Chassis Intrusion( ) Enabled( ) .

5. F10 . Enter Yes . 6. .

1.BIOS > Security( ) > Chassis Intrusion Configuration( ).

2.Chassis Intrusion( ) Reset( ) .

3.F10 . Enter Yes .

JBAT1: CMOS (Reset BIOS)

CMOS. CMOS.

BIOS

. BIOS,.

BIOS .BIOS . BIOSHELP( ) .

y .

BIOS

BIOS .

y DEL , F11Delete .

y MSI GO2BIOS OK( ) .BIOS .

F1:

F2: /

F3:

F4: CPU

F5: Memory-Z( -Z)

F6:

F7: EZ

F8:

F9:

F10: *

F12: USB (FAT/ FAT32 ) Ctrl+F:

* F10 . Yes( ) No( ) .

BIOS( )

BIOS . BIOS.

y BIOS F6 . y CMOS .

CMOS . BIOSCMOS .

BIOS( )

M-FLASH BIOS

:

BIOS MSI® BIOS USB.

BIOS :

1. POST Del BIOS .

2. USB .

3. M-FLASH Yes.

4. BIOS BIOS .

5. 100% .

MSI BIOS

:

LAN . BIOS :

1. MSI .

2. BIOS Update .

3. Scan .

4. Download BIOS .

5. Next In Windows mode Next Start BIOS

.

6. 100% .

OS, &

www.msi.com.

Windows® 10

1. .

2. Windows® 10 /USB . 3. Restart .

4. POST (Power-On Self Test) F11 .

5. Windows® 10 /USB .

6. Press any key to boot from CD or DVD….

7. Windows® 10 .

1. Windows® 10 .

2. MSI® .

3. Select to choose what happens with this disc , Run DVD Setup.exe .MSI DVDSetup.exe.

4. Drivers/Software . 5. Install .

6. . . 7. OK .

8. .

. 1. .

2. Utilities .

3. .

4. Install .

5. . . 6. OK .

7. .

Merci d’avoir acheté une carte mère MSI® B365M PRO-VD/ B365M PRO-VH/ B365M FIRE/ B365M WIND. Ce manuel d’utilisateur fournit des informations sur le schéma, la vue d’ensemble des composants, la configuration du BIOS et l’installation des logiciels.

Table des matières