Роутер tp link tl mr3420 инструкция

Юрий Санаев

Системный администратор. Менеджер по продажам компьютеров и wi-fi оборудования. Опыт работы – 10 лет. Знает о «железе» и софте все и даже больше.

Оцените статью:

Поделитесь с друзьями!

DECLARATION OF CONFORMITY

For the following equipment:

Product Description: 3G/4G Wireless N Router

Model No.: TL-MR3420 Trademark: TP-LINK

We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives:

Directives 1999/5/EC, Directives 2004/108/EC, Directives 2006/95/EC, Directives 1999/519/EC, Directives 2011/65/EU

The above product is in conformity with the following standards or other normative documents

ETSI EN 300 328 V1.7.1: 2006

ETSI EN 301 489-1 V1.8.1:2008& ETSI EN 301 489-17 V2.1.1:2009 EN 55022:2010

EN 55024:2010

EN 61000-3-2:2006+A1:2009+A2:2009 EN 61000-3-3:2008

EN60950-1:2006+A11 2009+A1:2010+A12:2011

EN62311:2008

The product carries the CE Mark:

Person is responsible for marking this declaration:

Yang Hongliang

Product Manager of International Business

Date of issue: 2012

TP-LINK TECHNOLOGIES CO., LTD.

Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park,

Shennan Rd, Nanshan, Shenzhen, China

TL-MR3420 3G/4G Wireless N Router User Guide

Package Contents

The following items should be found in your package:

TL-MR3420 3G/4G Wireless N Router

DC Power Adapter for TL-MR3420 3G/4G Wireless N Router

Ethernet Cable

Quick Installation Guide

Resource CD for TL-MR3420 3G/4G Wireless N Router, including:

This Guide

Other Helpful Information

 Note:

Make sure that the package contains the above items. If any of the listed items is damaged or missing, please contact with your distributor.

TL-MR3420 3G/4G Wireless N Router User Guide

Chapter 1.Introduction

1.1 Overview of the Router

TP-LINK understands the need for sharing the 3G/4G connection locally that benefits our end users. We realize the convenience with our latest wireless N 3G/4G Routers —— they give you the freedom to quickly set up a stable and high speed wireless network, up to 300Mbps, on-the-go and share a 3G/4G connection. By connecting a USB Card to the Router, a Wi-Fi hotspot is instantly established allowing users to share a Internet connection anywhere 3G/4G coverage is available. So whether you’re on the train, camping, or at a construction site, you’ll have a reliable wireless connection to accommodate your networking needs.

3G/4G and WAN Broadband

The TL-MR3420 3G/4G Wireless N Router provides 3G/4G and WAN (xDSL, static IP, or dynamic IP) two kinds of broadband connections to get on the Internet, you can via the Internet no matter at home or outside on business. Automatic 3G/4G and WAN failover feature just provide nonstop internet connection.

Incredibly High Speed

TP-LINK 3G/4G Router provides up to 300Mbps, faster than that of traditional 11g products, surpasses 11G performance enabling the use of high bandwidth-consuming applications such as HD Videos.

Wi-fi Protected Setup

With just pressing on the ‘WPS’ button, the Router automatically establishes a WPA2 secure connection for solid security in under a minute.

1.2 Conventions

The Router or TL-MR3420 mentioned in this guide stands for TL-MR3420 3G/4G Wireless N Router without any explanation.

1.3 Main Features

One 10/100M Auto-Negotiation RJ45 WAN port, four 10/100M Auto-Negotiation RJ45 LAN ports, supporting Auto MDI/MDIX

Compatible with LTE/HSPA+/HSUPA/HSDPA/UMTS/EVDO USB modem

Automatic 3G/4G and WAN failover

Wireless N speed up to 300Mbps

2T2R MIMO, CCA technologies deliver greater coverage and higher speed

Wireless security encryption easily at a push of “WPS” button

WDS wireless bridge provides seamless bridging to expand your wireless network

TL-MR3420 3G/4G Wireless N Router User Guide

Backward compatible with 802.11b and 802.11g devices

Provides WPA/WPA2-Enterprise, WPA/WPA2-Personal authentication, TKIP/AES encryption security

Supports 3G/4G/Dynamic IP/Static IP/PPPoE/L2TP/PPTP Internet access

Supports Virtual Server, Special Application and DMZ host

Supports UPnP, Dynamic DNS, Static Routing

Provides Automatic-connection and Scheduled Connection on certain time to the Internet

Built-in NAT and DHCP server supporting static IP address distributing

Connects Internet on demand and disconnects from the Internet when idle for PPPoE

Provides 64/128-bit WEP encryption security and wireless LAN ACL (Access Control List)

Supports Flow Statistics

Supports firmware upgrade and Web management

1.4Panel Layout

1.4.1The Front Panel

Table 1-1 The LEDs description

TL-MR3420 3G/4G Wireless N Router User Guide

 Note:

After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes and then turn off.

1.4.2The Rear Panel

Figure 1-2 Rear Panel sketch

The following parts are located on the rear panel (View from left to right).

POWER: The Power socket is where you will connect the power adapter. Please use the

power adapter provided with this TL-MR3420 3G/4G Wireless N Router.

ON/OFF: The switch is for you to turn on/off the Router, but only with the Router powered

on.

4,3,2,1 (LAN): These ports (4,3,2,1) connect the Router to the local PC(s)

WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet

WPS/RESET:

There are two ways to reset to the Router’s factory defaults:

1)Use the Factory Defaults function on “System Tools -> Factory Defaults” page in the Router’s Web-based Utility.

2)Use the Factory Default Reset button: With the Router powered on, use a pin to press and hold the WPS/RESET button (about 5 seconds) until the SYS LED becomes quick-flash from slow-flash. And then release the button and wait the Router to reboot to its factory default settings.

Wireless antenna: To receive and transmit the wireless data.

1.4.3The Side Panel

Figure 1-3 Side Panel sketch

The following parts are located on the side plate (View from left to right).

WIFI: This switch is an easy and convenient operation for you to turn on or off the wireless network.

USB: Connect to the USB Modem.

TL-MR3420 3G/4G Wireless N Router User Guide

Chapter 2.Connecting the Router

2.1 System Requirements

 Broadband Internet Access Service (DSL/Cable/Ethernet)

 One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Router is connected directly to the Ethernet.)

 PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors  TCP/IP protocol on each PC

 Web browser, such as Microsoft Internet Explorer 5.0 , Netscape Navigator 6.0 or above

2.2 Installation Environment Requirements

 Place the Router in a well ventilated place far from any heater or heating vent  Avoid direct irradiation of any strong light (such as sunlight)

 Keep at least 2 inches (5 cm) of clear space around the Router  Operating Temperature: 0 ~40 (32 ~104 )

 Operating Humidity: 10%~90%RH, Non-condensing

2.3 Connecting the Router

Before installing the Router, make sure your PC is connected to the Internet through the broadband service successfully. If there is any problem, please contact your ISP. After that, please install the Router according to the following steps. Don’t forget to pull out the power plug and keep your hands dry.

1.Power off your Cable/DSL Modem, and the Router.

2.Locate an optimum location for the Router. The best place is usually at the center of your wireless network. The place must accord with the Installation Environment Requirements.

3.Adjust the direction of the antenna. Normally, upright is a good direction.

4.Connect the PC(s) or Switch/Hub in your LAN to the LAN Ports of the 3G/4G Router with Ethernet cable.

5.The 3G/4G Router supports both 3G/4G and WAN connection; so you can insert 3G/4G USB Modem to the USB port of the Router (as shown in Figure 2-1), or connect the DSL/Cable Modem to the WAN port of the Router (as shown in Figure 2-2). Please visit our website http://www.tp-link.com to get the latest USB modems compatibility, and we recommend you to check whether the modem in your hand has already been tested by us.

6.Connect the power adapter to the power socket on the Router, and the other end into an electrical outlet. The Router will start to work automatically.

7.Power on your Cable/DSL Modem.

TL-MR3420 3G/4G Wireless N Router User Guide

Figure 2-1 Hardware Installation – 3G/4G connection

Figure 2-2 Hardware Installation – WAN connection

TL-MR3420 3G/4G Wireless N Router User Guide

Chapter 3.Quick Installation Guide

This chapter will show you how to configure the basic functions of your 3G/4G Wireless N Router using Quick Setup Wizard within minutes.

3.1 TCP/IP Configuration

The default IP address of the 3G/4G Wireless N Router is 192.168.0.1. And the default Subnet Mask is 255.255.255.0. These values can be changed as you desire. In this guide, we use all the default values for description.

Connect the local PC to the LAN ports of the Router. And then you can configure the IP address for your PC in the following two ways.

Configure the IP address manually

1)Set up the TCP/IP Protocol for your PC. If you need instructions as to how to do this, please refer to Appendix B: «Configuring the PC.»

2)Configure the network parameters. The IP address is 192.168.0.xxx («xxx» is any number from 2 to 254), Subnet Mask is 255.255.255.0, and Gateway is 192.168.0.1 (The Router’s

default IP address)

Obtain an IP address automatically

1)Set up the TCP/IP Protocol in «Obtain an IP address automatically» mode on your PC. If you need instructions as to how to do this, please refer to Appendix B: «Configuring the PC.»

2)Then the built-in DHCP server will assign IP address for the PC.

3.2 Quick Installation Guide

 Note:

If you are trying to connect to TL-MR3420 wirelessly, please refer to the label on the bottom of the Router for the Wireless Password.

1.To access the configuration utility, open a web-browser and type in the default address http://192.168.0.1 in the address field of the browser.

Figure 3-1 Login the Router

After a moment, a login window will appear, similar to the Figure 3-2. Enter admin for the User Name and Password, both in lower case letters. Then click the OK button or press the Enter key.

TL-MR3420 3G/4G Wireless N Router User Guide

Figure 3-2 Login Windows

 Note:

If the above screen does not pop-up, it means that your Web-browser has been set to a proxy. Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it.

2.After successful login, you can click the Quick Setup to quickly configure your Router. Click Next to proceed to the next screen.

Figure 3-3 Quick Setup

3.Select a desired Internet Access mode and then click Next. The configuration for each mode is similar. As follows we will take 3G/4G Only mode for example.

TL-MR3420 3G/4G Wireless N Router User Guide

Figure 3-4 Choose Internet Access Mode

3G/4G Only

In this mode, the Router will try 3G/4G access only. WAN access is disabled.

3G/4G Preferred

In this mode, the Router will try 3G/4G access first. If 3G/4G access fails and WAN access is valid, or if no 3G/4G USB modem is inserted, the Router would switch to WAN access. Once the Router succeeds to connect to the 3G/4G network, the Router would stop the WAN connection and switch back to 3G/4G access immediately.

WAN Preferred

In this mode, the Router will try WAN access first. If the WAN access fails and 3G/4G access is valid, the Router would switch to 3G/4G access. Once the Router succeeds to connect to the WAN network, the Router would stop the 3G/4G connection and switch back to WAN access immediately.

WAN Only

In this mode, the Router will try WAN access only. 3G/4G access is disabled.

4.The next screen will appear as shown in Figure 3-5. You need to set the required parameters and then click Next.

TL-MR3420 3G/4G Wireless N Router User Guide

Figure 3-5

Location — Select the location where you’re enjoying the 3G/4G card.

Mobile ISP — Select the ISP (Internet Service Provider) you apply to for 3G/4G service. The Router will show the default Dial Number and APN of that ISP. If your ISP is not listed in the

Mobile ISP, check the box before Set the Dial Number, APN, Username and Password manually and fill the Dial Number and APN blanks below.

Authentication Type — Some ISPs need a specific authentication type. Please confirm it with your ISP or keep it Auto.

Dial Number & APN — Set these two parameters manually after Set the Dial Number, APN, Username and Password manually is checked.

Username/Password — Enter the Username and Password provided by your ISP. These fields are optional but case-sensitive.

5.Configure the Wireless settings on the screen as shown in Figure 3-6, then click Next.

TL-MR3420 3G/4G Wireless N Router User Guide

Figure 3-6 Quick Setup – Wireless

Wireless Radio — Enable or disable the wireless radio choosing from the pull-down list.

Wireless Network Name — Enter a value of up to 32 characters. The same name of Wireless Network Name (SSID) must be assigned to all wireless devices in your network. Considering your wireless network security, the default Wireless Network Name is set to be TP-LINK_XXXXXX (XXXXXX indicates the last six unique numbers of each Router’s MAC address). This value is case-sensitive. For example, TEST is NOT the same as test.

Region — Select your region from the pull-down list. This field specifies the region where the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance.

Mode — This field determines the wireless mode which the Router works on.

Channel Width — Select any channel width from the pull-down list. The default setting is automatic, which can adjust the channel width for your clients automatically.

Channel — This field determines which operating frequency will be used. The default channel is set to Auto, so the AP will choose the best channel automatically. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.

TL-MR3420 3G/4G Wireless N Router User Guide

Wireless Security — You can select one of the following security options.

Disable Security — The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. It is recommended strongly that you choose one of following options to enable security.

WPA-PSK/WPA2-PSK — Select WPA based on pre-shared passphrase.

PSK Password — You can enter ASCII or Hexadecimal characters.

For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the length should be between 8 and 63 characters.

For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F, the length should be between 8 and 64 characters.

Please also note the key is case sensitive, this means that upper and lower case keys will affect the outcome. It would also be a good idea to write down the key and all related wireless security settings.

No change — If you choose this option, wireless security configuration will not change! These settings are only for basic wireless parameters. For advanced settings, please refer to Section 4.6: “Wireless”.

6.Click Finish to complete the Quick Setup.

Figure 3-7 Quick Setup – Finish

After the rebooting, please check whether you can access the Internet or not in the 4.2 Status page.

TL-MR3420 3G/4G Wireless N Router User Guide

Chapter 4.Configuring the Router

This chapter will show each Web page’s key functions and the configuration way.

4.1 Login

After your successful login, you will see the fifteen main menus on the left of the Web-based utility. On the right, there are the corresponding explanations and instructions.

The detailed explanations for each Web page’s key function are listed below.

4.2 Status

The Status page displays the current status information about the Router. All information is read-only.

TL-MR3420 3G/4G Wireless N Router User Guide

Figure 4-1 Status

4.3 Quick Setup

Please refer to Section 3.2: «Quick Installation Guide.»

4.4 WPS

This section will guide you to add a new wireless device to an existing network quickly by WPS (Wi-Fi Protected Setup) function.

TL-MR3420 3G/4G Wireless N Router User Guide

a). Choose menu “WPS”, you will see the next screen (shown in Figure 4-2).

Figure 4-2 WPS

WPS Status — Enable or disable the WPS function here.

Current PIN — The current value of the Router’s PIN displayed here. The default PIN of the Router can be found in the label or User Guide.

Restore PIN — Restore the PIN of the Router to its default.

Gen New PIN — Click this button, and then you can get a new random value for the Router’s PIN. You can ensure the network security by generating a new PIN.

Disable PIN of this device — WPS external registrar of entering this device’s PIN can be disabled or enabled manually. If this device receives multiple failed attempts to authenticate an external Registrar, this function will be disabled automatically.

Add Device — You can add the new device to the existing network manually by clicking this button.

b). To add a new device:

If the wireless adapter supports Wi-Fi Protected Setup (WPS) or QSS (Quick Secure Setup), you can establish a wireless connection between wireless adapter and Router by using either Push Button Configuration (PBC) method or PIN method.

 Note:

To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile.

For the configuration of the new device, here takes the Wireless adapter of our company for example.

I.By PBC (Push Button Configuration)

If the wireless adapter supports Wi-Fi Protected Setup or Quick Secure Setup and the PBC method, you can add it to the network by PBC with the following two methods.

Method One:

Step 1: Press the WPS/RESET button on the rear panel of the Router.

TL-MR3420 3G/4G Wireless N Router User Guide

Step 2: Press and hold the WPS or QSS button of the adapter directly for 2 or 3 seconds.

Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS configuration.

The WPS Configuration Screen of wireless adapter

Method Two:

Step 1: Press the WPS/RESET button on the rear panel of the Router.

Step 2: For the configuration of the wireless adapter, please choose Push the button on my access point in the configuration utility of the WPS as below, and click Next.

TL-MR3420 3G/4G Wireless N Router User Guide

The WPS Configuration Screen of wireless adapter

Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS configuration.

The WPS Configuration Screen of wireless adapter

Method Three:

Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-2, then the following screen will appear.

TL-MR3420 3G/4G Wireless N Router User Guide

Figure 4-3 Add A New Device

Step 2: Choose Press the button of the new device in two minutes and click Connect. Step 3: For the configuration of the wireless adapter, please choose Push the button on my

access point in the configuration utility of the WPS as below, and click Next.

The WPS Configuration Screen of Wireless adapter

Step 4: Wait for a while until the next screen appears. Click Finish to complete the WPS configuration.

TL-MR3420 3G/4G Wireless N Router User Guide

The WPS Configuration Screen of Wireless adapter

II. By PIN

If the wireless adapter supports Wi-Fi Protected Setup or Quick Secure Setup and the PIN method, you can add it to the network by PIN with the following two methods.

Method One: Enter the PIN into my Router

Step 1: Configure the wireless adapter. Please choose Enter a PIN into my access point or a registrar in the configuration utility of the WPS as below, and click Next.

The WPS Configuration Screen of wireless adapter

 Note:

In this example, the default PIN code of this adapter is 16952898 as the above figure shown.

Step 2: Configure the Router TL-MR3420. Keep the default WPS Status as Enabled and click the Add device button in Figure 4-2, then the following screen will appear.

TL-MR3420 3G/4G Wireless N Router User Guide

Step 3: Choose Enter the new device’s PIN and enter the PIN code of the wireless adapter in the field behind PIN in the previous figure. Then click Connect.

 Note:

The PIN code of the wireless adapter is always displayed on the WPS or QSS configuration screen.

Method Two: Enter the PIN from my Router

Step 1: Get the Current PIN code of the Router in Figure 4-2 (each Router has its unique PIN code. Here takes the PIN code 12345670 of this Router for example).

Step 2: For the configuration of the wireless adapter, please choose Enter a PIN from my access point in the configuration utility of the WPS as below, and enter the PIN code of the Router into the field behind Access Point PIN. Then click Next.

The WPS Configuration Screen of Wireless adapter

 Note:

The default PIN code of the Router can be found in its label or the WPS configuration screen as Figure 4-2.

TL-MR3420 3G/4G Wireless N Router User Guide

c). You will see the following screen when the new device successfully connected to the network.

 Note:

1)The status LED on the Router will light green all the time if the device has been successfully added to the network.

2)The WPS function cannot be configured if the Wireless Function of the Router is disabled. Please make sure the Wireless Function is enabled before configuring the WPS.

4.5 Network

Figure 4-4 the Network menu

There are five submenus under the Network menu ( as shown in Figure 4-4): Internet Access, 3G/4G, WAN, MAC Clone and LAN. Click any of them, and you will be able to configure the corresponding function.

4.5.1Internet Access

Choose menu “Network→Internet Access”, you can configure the access mode on the screen below. The Router is designed to work with either WAN port or 3G/4G USB modem, and supports “automatically take over back up with 3G/4G access” as Ethernet WAN failover.

Figure 4-5 Internet Access

TL-MR3420 3G/4G Wireless N Router User Guide

3G/4G Only

In this mode, the Router will try 3G/4G access only. WAN access is disabled.

3G/4G Preferred

In this mode, the Router will try 3G/4G access first;

When 3G/4G access fails and WAN access is valid, or when no 3G/4G USB modem is inserted, the Router would switch to WAN access;

When the Router succeeds to connect to the 3G/4G network, the Router would stop the WAN connection and switch back to 3G/4G access immediately.

WAN Preferred

In this mode, the Router will try WAN access first;

When the WAN access fails, and 3G/4G access is valid, the Router would switch to 3G/4G access;

When the Router succeeds to connect to the WAN network, the Router would stop the 3G/4G connection and switch back to WAN access immediately.

WAN Only

In this mode, the Router will try WAN access only. 3G/4G access is disabled.

Click the Save button to save your settings.

 Note:

1. If you are using the 3G/4G Preferred or WAN Preferred, the Router would connect, disconnect or switch the current access automatically. The Connect/Disconnect button (on 3G/4G, PPPoE, PPTP, L2TP) and some related parameters could not be set manually.

2. Only when the WAN connection is Dynamic IP, Static IP or PPPoE can the Router support the switch between 3G/4G mode and WAN mode.

4.5.2 3G/4G

Choose menu “Network→3G/4G”, you can configure parameters for 3G/4G function on the screen below. To use the 3G/4G function, you should first insert your USB modem on the USB port of the Router. There is already much 3G/4G USB modem information embedded in the Router. The USB modem parameters will be set automatically if the card is supported by the Router. If your USB modem inserted is supported by the Router, then “Identify successfully” will display in the 3G/4G USB Modem field as shown in Figure 4-6.

 Note:

3G/4G settings are unavailable when the Internet Access mode is set to WAN Only mode. Please change settings on 4.5.1 Internet Access if you want to use 3G/4G.

TL-MR3420 3G/4G Wireless N Router User Guide

Figure 4-6 3G/4G

Location — Please select the location where you’re enjoying the 3G/4G card.

Mobile ISP — Please select the ISP (Internet Service Provider) you apply to for 3G/4G service. The Router will show the default Dial Number and APN of that ISP.

Connect on Demand — You can configure the Router to disconnect your Internet connection after a specified period of the Internet connectivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates.

 Note:

Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time because some applications visit the Internet continually in the background.

Connect Automatically — Connect automatically after the Router is disconnected. To use this option, click the radio button.

Connect Manually — You can configure the Router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the Router will disconnect your Internet connection, and not be able to re-establish your connection automatically as soon as you attempt to access the Internet again. To use this option, click the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number in minutes that you wish to have the Internet connecting last unless a new link requested.

TL-MR3420 3G/4G Wireless N Router User Guide

 Note:

Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time because some applications visit the Internet continually in the background.

Authentication Type — Some ISPs need a specific authentication type, please confirm it with your ISP or keep it Auto.

Auto-The Router will have dynamic negotiation with the dialing server and the Autnentication Type need not to be specified. The default type is Auto.

PAP-Password Authentication Protocol. This protocol allows the Router to establish authentication with the peer using two handshakes. Select this option if the ISP requires this authentication type.

CHAP-Challenge Handshake Authentication Protocol. This protocol allows the route to establish authentication with the peer using three handshakes and checking the peer identity periodically. Select this option if the ISP requires this authentication type.

Click the Advanced Settings button to set up the advanced options in the screen as shown in Figure 4-7.

Figure 4-7 3G/4G Advanced Settings

Location / Mobile ISP – These two fields will display the location and the ISP you have selected in the previous page (shown in Figure 4-6). While you tick the below option Set the Dial Number and APN manually, there will be no specific information in these two fields.

Set the Dial Number and APN manually — Tick the checkbox and then you are able to fill in the Dial Number and APN blanks below, if your ISP is not listed in the Mobile ISP field in the previous page (Figure 4-6).

Dial Number — Enter the Dial Number provided by your ISP.