Yamaha rx v550 инструкция на русском

• Page 1
  RX-V550 AV Receiver OWNER’S MANUAL…

• Page 2: Important Safety Instructions

  IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage”…

• Page 3
  This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
• Page 4
  Retain this Owner’s Manual in a safe place for future reference. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

• Page 5: Table Of Contents

  INTRODUCTION FEATURES… 2 GETTING STARTED… 3 Supplied accessories … 3 Installing batteries in the remote control … 3 CONTROLS AND FUNCTIONS … 4 Front panel … 4 Remote control… 6 Using the remote control … 7 Front panel display … 8 Rear panel …

• Page 6: Features

  Center: 90 W Surround: 90 W + 90 W Surround back: 90 W Sound field features Proprietary YAMAHA technology for the creation of sound fields Dolby Digital/Dolby Digital EX decoder DTS/DTS ES Matrix 6.1, Discrete 6.1, DTS Neo:6, DTS 96/24 decoder…

• Page 7: Getting Started

  Supplied accessories Please check that you received all of the following parts. Remote control CODE SET TRANSMIT Batteries (4) SYSTEM POWER POWER STANDBY POWER (AAA, R03, UM-4) MD/CD-R TUNER SLEEP DTV/CBL V-AUX MULTI CH IN TV VOL TV CH VOLUME TV MUTE TV INPUT MUTE…

• Page 8: Controls And Functions

  CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front panel PHONES SPEAKERS STANDBY SILENT CINEMA 1 STANDBY/ON Turns on this unit or sets it to the standby mode. When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before this unit can reproduce sound.

• Page 9
  PHONES (SILENT CINEMA) jack Outputs audio signals for private listening with headphones. When you connect headphones, no signals are output to the OUTPUT jacks or to the speakers. All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels. A SPEAKERS A/B Turns on or off the set of front speakers connected to the A and/or B terminals on the rear panel each time the…

• Page 10: Remote Control

  CONTROLS AND FUNCTIONS Remote control This section describes the function of each control on the remote control used to control this unit. To operate other components, see “REMOTE CONTROL FEATURES” on page 51. CODE SET TRANSMIT POWER POWER STANDBY MD/CD-R TUNER DTV/CBL V-AUX…

• Page 11: Using The Remote Control

  H STRAIGHT (EFFECT) Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing. I SET MENU (A/B/C/D/E) Activates the SET MENU function. Selects preset station groups when the unit is in tuner mode.

• Page 12: Front Panel Display

  CONTROLS AND FUNCTIONS Front panel display SILENT CINEMA NIGHT ZONE2 MATRIX DISCRETE VIRTUAL DIGITAL PL x 1 Decoder indicators When any of this unit’s decoders function, the respective indicator lights up. 2 SILENT CINEMA indicator Lights up when headphones are connected and a sound field program is selected (see page 27).

• Page 13
  K LFE indicator Lights up when the input signal contains the LFE signal. L Input channel indicators/speaker indicators Indicate the channel components of the current digital input signal. Indicate the number of speakers connected in SPEAKERS (page 24), or indicate the channel being adjusted in SP LEVEL (page 48).

• Page 14: Rear Panel

  CONTROLS AND FUNCTIONS Rear panel MULTI CH INPUT AUDIO VIDEO VIDEO FRONT DIGITAL INPUT COAXIAL SURROUND /CBL CENTER WOOFER OPTICAL DTV/CBL MD/CD-R (PLAY) ZONE 2 /CD-R VIDEO (REC) WOOFER MONITOR OUT AUDIO OUTPUT MD/CD-R OPTICAL DIGITAL OUTPUT 1 DIGITAL INPUT jacks See pages 15, 17 and 18 for details.

• Page 15: Speaker Setup

  Place this speaker directly behind the listening position and at the same height as the surround speakers. Subwoofer The use of a subwoofer, such as the YAMAHA Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels,…

• Page 16: Speaker Connections

  SPEAKER SETUP Speaker connections Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

• Page 17
  SURROUND terminals Connect surround speakers to these terminals. SUB WOOFER jack Connect a subwoofer with built-in amplifier, such as the YAMAHA Active Servo Processing Subwoofer System, to this jack. SURROUND BACK terminals Connect a surround back speaker to these terminals.

• Page 18: Connections

  CONNECTIONS Before connecting components CAUTION Do not connect this unit or other components to the mains power until all connections between components are complete. Cable indications For analog signals left analog cables right analog cables For digital signals optical cables coaxial cables For video signals video cables…

• Page 19: Connecting Video Components

  CONNECTIONS Connecting video components Connections for DVD playback Optical out Video out DVD player Audio out COMPONENT VIDEO AUDIO VIDEO VIDEO S VIDEO MONITOR Video Video in monitor S VIDEO VIDEO MONITOR OUT (U.S.A. model)

• Page 20
  CONNECTIONS Connecting to the MULTI CH INPUT jacks This unit is equipped with 6 additional input jacks (left and right FRONT, CENTER, left and right SURROUND and WOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor or pre- amplifier.
• Page 21
  Connections for other video components Optical out Cable TV or satellite tuner Audio out DIGITAL INPUT COAXIAL OPTICAL DTV/CBL Audio in Audio out VIDEO AUX jacks (on the front panel) Use these jacks to connect any video source, such as a game console or video camera, to this unit.

• Page 22: Connecting Audio Components

  CONNECTIONS Connecting audio components Connections for audio components Coaxial out Audio out CD player DIGITAL INPUT COAXIAL MD/CD-R ( PLAY ) /CD-R ( REC ) AUDIO MD/CD-R OPTICAL DIGITAL OUTPUT (U.S.A. model) Audio out Audio in MD recorder or Optical in tape deck Optical out…

• Page 23: Connecting The Antennas

  • A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about outdoor antennas. 75-ohm/300-ohm antenna adapter (U.K.

• Page 24: Connecting The Power Supply Cord

  CONNECTIONS Connecting the power supply cord Connecting the AC power cord Plug the power cord into an AC wall outlet. AC OUTLET(S) (SWITCHED) U.K. and Australia models … 1 OUTLET Korea model …None Other models …2 OUTLETS Use these outlets to connect the power cords from your other components to this unit.

• Page 25: Impedance Selector Switch

  IMPEDANCE SELECTOR switch CAUTION Do not change the setting of the IMPEDANCE SELECTOR switch when the unit power is switched on, as doing so may damage the unit. If this unit fails to turn on when STANDBY/ON is pressed on either the front panel or remote control, the IMPEDANCE SELECTOR switch may not be fully slid to either position.

• Page 26: Turning On The Power

  CONNECTIONS Turning on the power When all connections are complete, turn on the power of this unit. PRESET/TUNING FM/AM A/B/C/D/E l PRESET/TUNING h EDIT NEXT LEVEL PROGRAM PHONES SPEAKERS STRAIGHT TONE CONTROL INPUT MODE STANDBY EFFECT SILENT CINEMA CODE SET TRANSMIT SYSTEM POWER…

• Page 27: Basic Setup

  The basic setup feature is a useful way to set up your system quickly and with minimal effort. • If you wish to configure the unit manually using more precise adjustments, use the detailed parameters in SOUND MENU (page 47) instead of using BASIC SETUP. •…

• Page 28
  BASIC SETUP Press d to display the SPEAKERS parameter. PRESET/CH SELECT Press j / i to select the number of speakers you connected. SPEAKERS 6spk Choices Display Front L/R 2spk SL SB SR SL SB SR Front L/R, Center L L C R 3spk SL SB SR Front L/R, Surround L/R…
• Page 29
  To balance the speaker levels Perform the following steps after step 13 (see page 24). V-AUX DTV/CBL MD/CD-R SILENT CINEMA NIGHT ZONE2 PTY HOLD AUTO MATRIX DISCRETE VIRTUAL HiFi DSP DIGITAL SLEEP FR——||—— PL x The unit outputs the test tone from the selected speaker and the left front (or left surround) speaker in turn.

• Page 30: Playback

  PLAYBACK Basic operations l PRESET/TUNING h PRESET/TUNING FM/AM A/B/C/D/E EDIT NEXT LEVEL PROGRAM INPUT PHONES SPEAKERS STRAIGHT TONE CONTROL INPUT MODE STANDBY EFFECT SILENT CINEMA CODE SET TRANSMIT SYSTEM POWER POWER STANDBY POWER TV VOL MD/CD-R TUNER SLEEP TV MUTE DTV/CBL V-AUX MULTI CH IN…

• Page 31
  Select a sound field program if desired. Rotate PROGRAM (or press AMP on the remote control to select the AMP mode, then press one of the sound field program buttons repeatedly) to select a sound field program. (See page 40 for details about sound field programs.) PROGRAM Front panel…

• Page 32: Selecting Sound Field Programs

  PLAYBACK Selecting MULTI CH INPUT Press MULTI CH INPUT so that “MULTI CH INPUT” appears in the front panel display and video monitor. MULTI CH INPUT Front panel MULTI CH INPUT Note When “MULTI CH INPUT” is shown in the front panel display, no other source can be played.

• Page 33
  Remote control operation CODE SET TRANSMIT TV VOL TV CH SYSTEM POWER POWER STANDBY POWER TV MUTE TV INPUT MD/CD-R TUNER SLEEP STEREO HALL JAZZ DTV/CBL V-AUX MULTI CH IN MUSIC ENTERTAIN TV THTR q/DTS NIGHT EX/ES TV VOL TV CH VOLUME PRESET/CH LEVEL…
• Page 34
  PLAYBACK Notes • Some 6.1-channel compatible discs do not have a signal (flag) which this unit can automatically detect. When playing these kinds of discs with 6.1-channel, select a decoder manually (PLIIx Music, EX/ES or EX). • 6.1-channel playback is not possible even if EX/ES is pressed in the following cases: –…
• Page 35
  Listening to high fidelity stereo sound (Direct Stereo) Direct Stereo allows you to bypass this unit’s decoders and DSP processors to enjoy pure high fidelity sound from 2- channel PCM and analog sources. Rotate PROGRAM (or press AMP to select the AMP mode, then press STEREO repeatedly) to select “Direct Stereo”.

• Page 36: Selecting Input Modes

  PLAYBACK Downmixing to 2 channels You can enjoy 2-channel stereo playback even from multi- channel sources. Rotate PROGRAM (or press STEREO on the remote control) to select 2ch Stereo. PROGRAM STEREO MUSIC q/DTS Front panel 2ch Stereo You can use a subwoofer with this program when SWFR or BOTH is selected in “BASS OUT”.

• Page 37
  Notes • When you play DTS-encoded CD/LDs with the input mode set to AUTO: – This unit automatically switches to the DTS decoding mode. The unit remains in DTS mode (and the t indicator may flash) for up to 30 seconds after playback of the DTS source is complete.

• Page 38: Tuning

  TUNING Automatic and manual tuning There are 2 tuning methods; automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. Automatic tuning l PRESET/TUNING h PRESET/TUNING FM/AM A/B/C/D/E EDIT NEXT LEVEL PROGRAM INPUT PHONES SPEAKERS STRAIGHT…

• Page 39: Presetting Stations

  Manual tuning If the signal from the station you want to select is weak, tune into it manually. Manually tuning into an FM station will automatically switch the tuner to monaural reception to increase the signal quality. Select TUNER and the reception band following steps 1 and 2 as described in “Automatic tuning”.
• Page 40
  TUNING Press and hold MEMORY (MAN’L/AUTO FM) for more than 3 seconds. The preset number, the MEMORY and AUTO indicators flash. After about 5 seconds, automatic presetting starts from the frequency currently displayed and proceeds toward the higher frequencies. MEMORY MAN’L/AUTO FM V-AUX DTV/CBL…

• Page 41: Selecting Preset Stations

  Press PRESET/TUNING l / h to select a preset station number (1 through while the MEMORY indicator is flashing. Press h to select a higher preset station number. Press l to select a lower preset station number. l PRESET/TUNING h LEVEL V-AUX DTV/CBL…

• Page 42: Exchanging Preset Stations

  TUNING Exchanging preset stations You can exchange the assignment of two preset stations with each other. The example below describes the procedure for exchanging preset station “E1” with “A5”. l PRESET/TUNING h PRESET/TUNING FM/AM A/B/C/D/E EDIT NEXT LEVEL PROGRAM INPUT PHONES SPEAKERS STRAIGHT…

• Page 43: Recording

  Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components. PRESET/TUNING FM/AM A/B/C/D/E l PRESET/TUNING h MEMORY EDIT NEXT LEVEL MAN’L/AUTO FM PROGRAM INPUT PHONES SPEAKERS STRAIGHT TONE CONTROL INPUT MODE STANDBY EFFECT SILENT CINEMA…

• Page 44: Sound Field Programs

  The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources. Set the input mode to AUTO (see page 32) to enable this unit to automatically switch to the appropriate digital decoder according to the input signal.

• Page 45: Dolby Digital

  Program DOLBY DIGITAL Standard 5.1-channel processing for Dolby Digital sources. SUR. STANDARD DOLBY DIGITAL CINEMA DSP enhanced processing for Dolby Digital sources. SUR. ENHANCED DOLBY D EX Standard 6.1-channel processing for Dolby Digital sources. SUR. STANDARD DOLBY D EX CINEMA DSP enhanced 6.1-channel processing (Dolby Digital EX) for Dolby Digital sources.

• Page 46: For Music Sources

  SOUND FIELD PROGRAM DESCRIPTIONS For music sources You can select from the following sound fields when playing music sources, like CD, FM/AM broadcasting, tapes, etc. Program CONCERT HALL HiFi DSP processing. A classic shoe-box type concert hall with approximately 1700 seats. Pillars and ornate carvings create extremely complex reflections which produce a very full, rich sound.

• Page 47: Advanced Operation

  Using the sleep timer Use this feature to automatically set this unit in the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to the AC OUTLET(S).

• Page 48: Manually Adjusting Speaker Levels

  ADVANCED OPERATIONS Manually adjusting speaker levels You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources through the MULTI CH INPUT jacks. Please note that this operation will override the level adjustments made in “BASIC SETUP”…

• Page 49: Set Menu

  You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

• Page 50: Using Set Menu

  SET MENU Using SET MENU Use the remote control to access and adjust each parameter. TV VOL TV CH VOLUME TV MUTE TV INPUT MUTE STEREO HALL JAZZ ROCK MUSIC ENTERTAIN TV THTR MOVIE q/DTS NIGHT EX/ES STRAIGHT ENTER EFFECT PRESET/CH LEVEL SET MENU…

• Page 51: Sound Menu

  1 SOUND MENU Use to manually adjust any speaker setting or compensate for video signal processing delays when using LCD monitors or projectors. Most of the SOUND MENU parameters are set automatically when you perform “BASIC SETUP” (see page 23). Speaker set A)SPEAKER SET Use to manually adjust any speaker setting.

• Page 52
  SET MENU Speaker level B)SP LEVEL Use these settings to manually balance the speaker levels between the front left or surround left speakers and each speaker selected in SPEAKER SET (page 47). Choices: –10.0 dB to +10.0 dB • FR adjusts the balance of the front left and front right speakers.

• Page 53: Input Menu

  Audio set G)AUDIO SET Use to customize this units overall audio settings. Audio mute A.MUTE Use to adjust how much the mute function reduces the output volume. Choices: MUTE, –20 dB • Select MUTE to completely halt all output of sound. •…

• Page 54: Option Menu

  SET MENU 3 OPTION MENU Use to adjust the optional system parameters. Display set A)DISPLAY SET Dimmer DIMMER Use to adjust the brightness of the front panel display. Choices: –4 to 0 Video conversion V CONV. Use this feature to turn on/off conversion of composite (VIDEO) signals to S-Video signals.

• Page 55: Remote Control Features

  REMOTE CONTROL FEATURES In addition to controlling this unit, the remote control can also operate other A/V components made by YAMAHA and other manufacturers. To control other components, you must set up remote control with the appropriate manufacturer codes. Control area…

• Page 56: Setting Manufacturer Codes

  U.K. and Europe models Other models Note You may not be able to operate your YAMAHA component even if a YAMAHA manufacturer code is initially set as listed above. In this case, try to set other YAMAHA manufacturer code(s). Press an input selector button or select the component you want to set up.

• Page 57: Controlling Other Components

  Controlling other components Once you set the appropriate manufacturer codes, you can use this remote to control your other components. Note that some buttons may not correctly operate the selected component. Use the input selector buttons to select the component you want to operate. The remote control automatically switches to the appropriate control mode for that component.

• Page 58: Clearing Setup Manufacturer Codes

  REMOTE CONTROL FEATURES Clearing setup manufacturer codes Clearing a setup manufacturer code for component control Press an input selector button or select the component control for which you want to clear the manufacturer code. MD/CD-R TUNER DTV/CBL V-AUX Press CODE SET using a ballpoint pen or similar object.

• Page 59: (U.s.a., Canada And Australia Models Only)

  YAMAHA dealer or service center for the Zone 2 connections which will best meet your requirements. • Some YAMAHA models are able to connect directly to the REMOTE CONTROL OUT jack of this unit. If you own these products, you may not need to use an infrared emitter.

• Page 60: Remote Controlling Zone 2

  ZONE 2 (U.S.A., CANADA AND AUSTRALIA MODELS ONLY) Remote controlling Zone 2 The supplied remote control can be used to control Zone 2. You can even select the input source and control components located in the main room directly from the second room regardless of the listening condition in the main room.

• Page 61
  When you have finished using the unit To set both the main unit and Zone 2 to standby mode While holding down AMP, press STANDBY. • You can turn on both the main unit and Zone 2 simultaneously by holding down AMP and pressing SYSTEM POWER. •…

• Page 62: Editing Sound Field Parameters

  The acoustics in your room could be changed to those of a concert hall, a dance floor, or virtually any size room at all. This ability to create sound fields at will is exactly what YAMAHA has done with the digital sound field processor. Changing parameter settings You can enjoy good quality sound with the factory preset parameters.

• Page 63
  Repeat steps 2 through 4 as necessary to change other program parameters. Note You cannot change parameter values when “MEMORY GUARD” is set to ON. If you want to change the parameter values, set “MEMORY GUARD” to OFF (see page 50). Memory back-up The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby…

• Page 64: Sound Field Parameter Descriptions

  SOUND FIELD PARAMETER DESCRIPTIONS SOUND FIELD PARAMETER DESCRIPTIONS You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your listening room. Not all of the following parameters are found in every program. DSP LEVEL Function: This parameter adjusts the level of all the DSP effect sounds within a narrow range.

• Page 65
  For PRO LOGIC IIx Music and PRO LOGIC II Music PANORAMA Function: Extends the front stereo image to include the surround speakers for wraparound effect. Choices: OFF/ON, initial setting is OFF. DIMENSION Function: Gradually adjusts the sound field either towards the front or towards the rear. Control range: –3 (towards the rear) to +3 (towards the front), initial setting is STD (standard).

• Page 66: Troubleshooting

  Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. General…

• Page 67
  Problem The sound suddenly The protection circuitry has been activated goes off. because of a short circuit, etc. The sleep timer has turned the unit off. The sound is muted. Only the speaker on Incorrect cable connections. one side can be heard.
• Page 68
  TROUBLESHOOTING Problem Dolby Digital or DTS The connected component is not set to sources cannot be output Dolby Digital or DTS digital played. (Dolby Digital signals. or DTS indicator in The input mode is set to ANALOG. the front panel display does not light up.) A “humming”…
• Page 69
  Tuner Problem FM stereo reception is The characteristics of FM stereo noisy. broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. There is distortion, and There is multipath interference. clear reception cannot be obtained even with a good FM antenna.

• Page 70: Resetting The Factory Presets

  RESETTING THE FACTORY PRESETS RESETTING THE FACTORY PRESETS If you want to reset all of your unit’s parameters for any reason, do the following. This procedure completely resets ALL parameters, including the SET MENU, level, assign and tuner presets. Be sure this unit is in standby mode. PRESET/TUNING FM/AM A/B/C/D/E…

• Page 71: Glossary

  Audio formats Dolby Digital Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels (left, center, and right), and 2 surround stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, called LFE (low frequency effect), the system has a total of 5.1-channels (LFE is counted as 0.1 channel).

• Page 72: Sound Field Programs

  SILENT CINEMA YAMAHA has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for each sound field so that accurate representations of all the sound field programs can be enjoyed on headphones.

• Page 73: Video Signal Information

  Video signal information Component video signal With the component video signal system, the video signal is separated into the Y signal for the luminance and the P and P signals for the chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent.

• Page 74: Specifications

  SPECIFICATIONS AUDIO SECTION • Minimum RMS Output Power for Front, Center, Surround, Surround back 20 Hz to 20 kHz, 0.06% THD, 8 … 90 W • Maximum Power (EIAJ) [China, Korea and General models] 1 kHz, 10% THD, 8 … 130 W •…
• Page 75
  LIST OF MANUFACTURER CODES DAYTRON DECCA A TANDY 0941 DIXI ABEX 1151 DUMONT ADMIRA 1141 DYNATECH ADVENTURA 1131 ELECTROBAND AIKO 1121 ELECTROHOME AIWA 1481 ELECTRON AKAI 0331, 1101, 1111 ELIN ALBA 0431 ELTA ALLERON 1091 EMERSON AMBASSADOR 1081 AMSTRAD 0481, 1081 ANAM 0251, 1041, 1051, 1061, 1071…
• Page 76
  SEARS 0101, 0161, 0171, 0351, 0481, 0521, 0621, 0761, 0801, 0861, 0971, 0981, WATSON 1091 XOGEGO SHANGHAI 1561, 1681 SHARP 0461, 0471, 0541, YAMAHA 0661, 0911, 0941, YOKO 1141 ZENITH SHOGUN 1031 SIGNATURE 0991, 1771 ZONDA SIMPSON 0581, 0961 SOLAVOX…

• Page 77: Dvd Player

  VIDEO CONCEPTS PHILCO 0002, 0932 PHILIPS 0002, 0282, 0402, 0492, 0932 WARDS PILOT 0912 PIONEER 0442, 0542 1002, 1012, 1022, YAMAHA 0202, 0632 1032, 1042, 1052, ZENITH 0042, 0362, 0512, 1062 0672 0512 0612 DVD PLAYER 0272, 0612 0382, 0392, 0932…

• Page 78
  0345 SHARP SHARP 0235, 0665, 0895, SHERWOOD 1065, 1075 SONY SHERWOOD 0115, 0235, 0395, TEAC 0475 TECHNICS SIEMENTS GARRARD WARDS 1245 YAMAHA SIGNATURE 0175 SONTEC 1165 SONY 0065, 0565, 0865, 1145 STARON 1235 0025 SYLVANIA 0215 SYMPHONIC 0335 TANDY 0305…
• Page 79
  YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA…

• Руководства по ремонту
  
  1
  

• Инструкции по эксплуатации
  
  1
  

На NoDevice можно скачать инструкцию по эксплуатации для Yamaha RX-V550. Руководство пользователя необходимо для ознакомления с правилами установки и эксплуатации Yamaha RX-V550. Инструкции по использованию помогут правильно настроить Yamaha RX-V550, исправить ошибки и выявить неполадки.

• Yamaha RX-V550 — page 1

  YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHO RPE AVE., BUEN A PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE. , SCARBOROUGH, ONTAR IO M1S 3R1, CAN ADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RE LLINGEN BEI HAMBURG , F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZA T BP70 CROISSY-BEAUB …

• Yamaha RX-V550 — page 2

  1 T o assure the finest performance, please read this manual carefully . Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry , clean place — away fr om direct sunlight, heat sources, vibration, dust, moisture , and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the lef …

• Yamaha RX-V550 — page 3

  1 English PREP ARA TION INTRODUCTION BAS I C OPERA TION SOUND FIELD PROGRAM S AD V ANCED OPERA TION ADDITIONAL INFORMA TION FEATU RES …… ………… ………. ………… ……… ………… 2 GETTING STARTED … ………. ………… ………… ……. 3 Supplied accessories ………….. ……………. …………… ….. 3 Ins …

• Yamaha RX-V550 — page 4

  FEATURES 2 Built-in 6-channel power amplifier ◆ Minimum RMS output po wer (0.06% THD, 20 Hz – 20 kHz, 8 Ω ) Front: 90 W + 90 W Center: 90 W Surround: 90 W + 90 W Surround back: 90 W Sound field featur es ◆ Proprietary Y AMAHA technology for the creation of sound fields ◆ Dolby Digita l/Dolb y Digital EX decoder ◆ DTS/DTS-ES Matrix 6.1, …

• Yamaha RX-V550 — page 5

  GETTING STARTED 3 English INTRODUCTION Please check t hat you recei ved all of the following parts. 1 Press the part and slide the battery compartment cover off. 2 Insert four supplied batteries (AAA, R03, UM-4) according to th e polarity markings (+ and –) on the inside of the battery compartment. 3 Slide the cover back unt il it sn aps into pla …

• Yamaha RX-V550 — page 6

  CONTROLS AND FUNCTIONS 4 1 ST AND BY/ON T urns on this unit or sets it to the standby mode. When you turn on this unit, you will hear a click a nd there will be a 4 to 5-second delay before this unit can reproduce sound. In standby mo de, this unit consumes a small amo unt of po wer in order to receive infrared-signa ls from the remote control. 2 R …

• Yamaha RX-V550 — page 7

  CONTROLS AND FUNCTIONS 5 English INTRODUCTION 0 PHONES (SILENT CINEMA) jack Outputs audio signals for pri v ate listening with headphones. When you connec t headphones, no sign als are output to the OUTPUT jacks or to the speakers. All Dolby Digital and DTS au dio signals are mix ed down to the left and right headphone channels. A SPEAKERS A/B T u …

• Yamaha RX-V550 — page 8

  CONTROLS AND FUNCTIONS 6 This section describes the func tion of each control o n the remote control used to contro l this unit. T o operate other components, see “REMO TE CONTR OL FEA TURES” on page 54. 1 Infrared windo w Outputs infrared control signals. Aim thi s window at the component you want to operate. 2 CODE SET Use to set up manufactu …

• Yamaha RX-V550 — page 9

  CONTROLS AND FUNCTIONS 7 English INTRODUCTION H STRAIGHT (EFFECT) Switches the sound f ields of f or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respec tiv e speak ers without effect processing. I SET MENU (A/B/C/D/E) Acti vat es the SET MENU function . Selects preset station groups when …

• Yamaha RX-V550 — page 10

  CONTROLS AND FUNCTIONS 8 1 Decoder indicator s When any of this unit’ s decode rs function, the respectiv e indicator lights up. 2 SILENT CINEMA indicator Lights up when headphones are connected and a sound field progr am is sele cted (see page 27). 3 NIGHT indica tor Lights up when you select night listening mode. 4 Input source indicators A cur …

• Yamaha RX-V550 — page 11

  CONTROLS AND FUNCTIONS 9 English INTRODUCTION K LFE indicator Lights up when the input signal contains the LFE signal. L Input chann el indicator s/speaker indicato rs Indicate the channe l components of the current digital input signal. Indicate the n umber of speak ers connected in SPEAKERS (page 24), or indicate the ch annel being adjusted in SP …

• Yamaha RX-V550 — page 12

  CONTROLS AND FUNCTIONS 10 1 DIGIT AL INPUT jacks See pages 15, 17 and 18 for details. 2 MUL T I CH INPUT jac ks See page 16 for connection information. 3 Video component ja cks See pages 15 and 17 for connection information. 4 A C OUTLET(S) Use to supply po wer to your other A/V components (see page 20). 5 DIGIT AL OUTPUT jack See page 18 for detai …

• Yamaha RX-V550 — page 13

  SPEAKER SE TUP 11 English PREP ARA TION The speaker layout belo w sho ws the standard ITU-R speaker setting. Y ou can us e it to enjo y CINEMA DSP and multi-channel audio sources. Front speaker s (FR and FL) The front speakers are used for the main source sound plus effect sounds. Place these speakers an equal distance from the ideal listening posi …

• Yamaha RX-V550 — page 14

  12 SPEAKER SETUP Be sure to connect the left ch annel (L), right channel (R), “+” (red) and “–” (black) prope rly . If the connections are faulty , no sound will be heard from the speakers, and if the polarity of the speaker connect ions is incorrect, the sound will be unnatural and lack bass. • If you will use 6 ohm speakers, be sure t …

• Yamaha RX-V550 — page 15

  13 English SPEAKER SE TUP PREP ARA TION ■ FRONT terminals Connect one or two speak er systems to these terminals. If you use only one speaker system , connect it to either the FR ONT A or B terminals. ■ CENTER terminals Connect a center speak er to these terminals. ■ SURROUND terminals Connect surround speak ers to these terminals. ■ SUB WO …

• Yamaha RX-V550 — page 16

  CONNECTIONS 14 Do not connect this unit or other components to the mains power until all connections between components are complete. ■ Cable indication s ■ Analog jac ks Y ou can input analog signals from audio components by connecting audio pin ca ble to the analog jacks on this unit. Connect red plugs to the right jacks and white plugs to th …

• Yamaha RX-V550 — page 17

  15 English CONNECTIONS PREP ARA TION ■ Connections f or D VD pla ybac k Connecting video components MONITOR OUT AUDIO VIDEO S VIDEO DVD VIDEO R L VIDEO COMPONENT VIDEO P R DVD MONITOR OUT P B Y DVD S VIDEO L R O DVD p l a ye r Video monitor Optical out V ideo out Audio out V i deo in 01EN_00_RXV550_EB.b ook Page 15 Thursday, Feb ruary 5, 2004 1:5 …

• Yamaha RX-V550 — page 18

  16 CONNECTIONS ■ Connecting to the MUL TI CH INPUT jacks This unit is equipped with 6 additio nal input jacks (left and right FR ONT , CENTER, left and right SURROUND and SUB WOOFER) for discrete multi-channe l input from a multi-format player , external decoder , sound processor or pre- amplifier . Connect the output jacks on your multi-format p …

• Yamaha RX-V550 — page 19

  17 English CONNECTIONS PREP ARA TION ■ Connections f or other video components ■ VIDEO A UX jacks (on the fr ont panel) Use these jacks to connect an y video source, such as a game console or video camer a, to this uni t. AUD I O VIDEO S VIDEO DTV /CBL VIDEO R L OUT VCR IN COMPONENT VIDEO P R DTV /CBL P B Y DIGIT AL INPUT DTV/CBL CD COAXIAL OPT …

• Yamaha RX-V550 — page 20

  18 CONNECTIONS ■ Connections f or audio components Connecting audio components AUD I O R L IN ( PLA Y ) ( REC ) MD /CD-R CD DIGIT AL OUTPUT DIGIT AL INPUT OPTICAL MD/CD-R CD COAXIAL MD/CD-R L R L R L R O O C CD player MD recorder or tape dec k Coaxial out Audio out Audio in Audio out Optical in Optical ou t 01EN_00_RXV550_EB.b ook Page 18 Thursda …

• Yamaha RX-V550 — page 21

  19 English CONNECTIONS PREP ARA TION Both AM and FM indoor antennas are included with this unit. In genera l, these anten n as should provi de suf fici ent signal strength. Connect each antenna correctly to the designated terminals. ■ Connecting the AM loop anten na 1 Set up the AM loop ante nna , then connect it to the terminals on this unit. 2 …

• Yamaha RX-V550 — page 22

  20 CONNECTIONS ■ Connecting the A C power cor d Plug the po wer cord into an A C wall outlet. ■ A C OUTLET(S) (SWITCHED) U.K. and Australia models .. ……….. ……….. …… 1 OUTLET K orea model …….. ……….. ……….. ………… ……….. ………. None Other models ………….. ……….. ……….. ……….. …2 …

• Yamaha RX-V550 — page 23

  21 English CONNECTIONS PREP ARA TION ■ IMPED ANCE SELECTOR s witch Do not change the setting of the IMPED ANCE SELECT OR switch when the unit po wer is switched on, as doing so may damage the unit. If this unit fails to turn on when ST ANDBY/ON is pressed on either the front panel or remote control, the IMPED ANCE SELECT OR switch may not be full …

• Yamaha RX-V550 — page 24

  22 CONNECTIONS When all connections are complete, turn on the power of this unit. 1 Press ST ANDBY/ON (SYSTEM PO WER on the remote control) to turn on the power of this unit. 2 T urn on the video monitor connected to this unit. T urning on the power AUTO/MAN’L MONO MAN’L/AUTO FM LEVEL NEXT EDIT EFFECT MEMORY FM/AM PRESET/TUNING A/B/C/D/E …

• Yamaha RX-V550 — page 25

  BASIC SETUP 23 English PREP ARA TION The basic setup feat ure is a useful w ay to set up your system quickly and with minimal ef fort. y • If you wish to conf igure the un it manually using more precise adjustments, use the detailed parameter s in SOUND MENU (page 50) instead of using BASIC SETUP. • Altering any parameters in BASIC SETUP will r …

• Yamaha RX-V550 — page 26

  24 BASIC SETUP 7 Press d to display the SPEAKERS parameter . 8 Press j / i to select the number of speakers you connected. SPEAKERS 6spk 9 Press d to display SET/CANCEL. 10 Press j / i to select the desired se tting. >SET CANCEL SET T o apply the settings you chose in steps 4 through 8. CANCEL T o cancel the se tup without making any changes. 11 …

• Yamaha RX-V550 — page 27

  25 English BASIC SETUP PREP ARA TION ■ T o bal ance the spea ker le vels Perform the follo wing steps after step 13 (see page 24). The unit outputs the test tone from the selected speaker and the left front (or left surround) speaker in turn. The indicator of the speaker curre ntly outputting the test tone flashes in the front panel display . 1 P …

• Yamaha RX-V550 — page 28

  PLAYBACK 26 1 Press ST ANDBY/ON (SYSTEM PO WER on the remote control) to turn on the power . 2 T urn on the video monitor connected to this unit. 3 Press SPEAKERS A or B on the front panel. Each press turns the respecti ve speak ers on or of f. 4 Select the input source. Use INPUT (or press one of the input selector b uttons on the remote control) …

• Yamaha RX-V550 — page 29

  27 English PLAYBACK BAS I C OPERA TION 7 Select a sound fiel d program if desired. Rotate PR OGRAM (or press AMP on the remote control to select the AMP mode, then press one of the sound field program b uttons repeatedly) to select a sound field p rogram. (See page 43 for details about sound field programs.) T o listen wit h headphones ( SILENT CIN …

• Yamaha RX-V550 — page 30

  28 PLAYBACK ■ Selecting MUL TI CH INPUT Press MUL TI CH INPUT so that “MUL TI CH INPUT” appears in the front panel display and video monitor . MULTI CH INPUT When “MUL TI CH INPUT” is shown in the front panel display , no other source can be played. T o select another input source with INPUT (or one of the input selector b uttons), pres s …

• Yamaha RX-V550 — page 31

  29 English PLAYBACK BAS I C OPERA TION ■ Remote contr ol operation Press AMP to select the AMP mode, then press one of the sound field program buttons repeatedly to select the desired program. The name of the selected program appears in the front panel display . y Feel free to choose a sound f ield program based on your listening preference, and …

• Yamaha RX-V550 — page 32

  30 PLAYBACK • Some 6.1-channel compatible discs do not ha ve a signal (flag) which this unit can automatically detect. Whe n playing these kinds of discs with 6.1-channe l, select a decoder manually (PLIIx Music, EX/ ES or EX). • 6.1-channel playback is not possibl e e ven if EX/ES is pressed in the following cases: – When “SURR LR” (see …

• Yamaha RX-V550 — page 33

  31 English PLAYBACK BAS I C OPERA TION ■ Listening to high fidelity stereo sound (Direct Stereo) Direct Stereo allo ws you to b ypass this unit’ s decoders and DSP processors to enjoy pure high fidelity sound from 2- channel PCM and analog sources. Rotate PROGRAM (or pre ss AMP to select the AMP mode, then press ST EREO repeatedly) to select ? …

• Yamaha RX-V550 — page 34

  32 PLAYBACK ■ Down mixing to 2 c hannels Y ou can enjoy 2-channel stereo playback ev en from multi- channel sources. Rotate PROGRAM (or press STEREO on the remote control) to select 2ch Stereo. 2ch Stereo y Y ou can use a subwoofer with this program when SWFR or BO TH is selected in “BASS OUT”. ■ Listening to unpr oces sed input signals In …

• Yamaha RX-V550 — page 35

  33 English PLAYBACK BAS I C OPERA TION • When you play DTS-encoded CD/LDs with the input mode set to A UT O: – This unit automatically switches to the DTS decoding mode. The unit remains in DTS mode (and the t indicator may flash) for up to 30 seconds after playb ack of the DTS source is complete. T o manually release the D TS mode, press INPUT …

• Yamaha RX-V550 — page 36

  TUNING 34 There are 2 tuning methods ; automatic and manual. Automatic tuning is ef fectiv e when station signals are strong and there is no interference. ■ A utomatic tuni ng 1 Rotate INPUT to select TUNER as the input sour ce. 2 Press FM/AM to select the reception band. “FM” or “AM” appears in the front panel display . 3 Press TUNING MO …

• Yamaha RX-V550 — page 37

  35 English TUNING BAS I C OPERA TION ■ Manual tuning If the signal from the station you want to select is weak, tune into it manually . Manuall y tuning into an FM station will automatical ly switch the tuner to monaur al reception to increase the signal qua lity . 1 Select TUNER and the reception band follo wing steps 1 and 2 as described in “ …

• Yamaha RX-V550 — page 38

  36 TUNING 3 Press and hold MEMOR Y (MAN’L/A UT O FM) for more than 3 seconds. The preset number , the MEMOR Y and A UT O indicators flash. After a bout 5 seconds, automatic presetting starts from the frequency currently displayed and proceeds to ward the higher frequencies. When automatic pre set tuning is comple ted, the front panel display sho …

• Yamaha RX-V550 — page 39

  37 English TUNING BAS I C OPERA TION 4 Press PRESET/TUNING l / h to select a preset station number (1 through while the MEMOR Y indicator is flashing. Press h to select a higher preset station number . Press l to select a lower preset station number . 5 Press MEMOR Y (MAN’L/A UT O FM) on the front panel while the MEMOR Y indicator is flashing. …

• Yamaha RX-V550 — page 40

  38 TUNING Y ou can exchange t he assignmen t of two preset stations with each other . The example belo w describes the procedure for exchanging preset station “E1” with “A5”. 1 Select preset station “E1” using A/B/C/D/E and PRESET/TUNING l / h . See “Selec ting preset sta tions”. 2 Press and hold PRESET/TUNING (EDIT) for more than 3 …

• Yamaha RX-V550 — page 41

  39 English TUNING BAS I C OPERA TION RDS (Radio Data System) is a data transmission system used by FM stations in many countries. The RDS function is carried out among the network stations. This unit can receiv e v arious RDS data such as PS (Program Service na me), PTY (Program T ype), R T (Radio T ext), CT (Clock T ime ), EON (Enhanced Other Netw …

• Yamaha RX-V550 — page 42

  40 TUNING If you select the desired program type, this unit automaticall y searches all preset RDS stations that are broadcasting a program of the required type. y When performing this operation with the remote control, first press TUNER to set the remote to tuner mode. 1 Press PTY SEEK MODE to se t this unit in the PTY SEEK mode. The program type …

• Yamaha RX-V550 — page 43

  41 English TUNING BAS I C OPERA TION This function uses the EON data service on the RDS station network. If you select the desired program type (NEWS, INFO, AFF AIRS or SPOR T), this unit automatical ly searches for all preset RD S stations that are scheduled to broadcast the se lected type of program and switches from the station curr ently being …

• Yamaha RX-V550 — page 44

  RECORDING 42 Recording adjustments a nd other operations are performed from the recording components. Refer to the operating instructions for those components. 1 T urn on the power of this un it and al l connected c omponents. 2 Select the source component y ou want to record fr om. 3 Start playbac k (or select a broadcast station) on the source co …

• Yamaha RX-V550 — page 45

  SOUND FIELD PROGRAM DESCRIPTIONS 43 English SOUND FIELD PROGRAM S This unit is equipped with a variety of precise digital de coders that allo w you to enjo y multichannel playback from almost any sound sour ce (stereo or mu ltichannel). This unit is also equipped with a Y AMAHA digital sound f ield processing (DSP) chip containing se veral sound f …

• Yamaha RX-V550 — page 46

  44 SOUND FIELD PROGRAM DESCRIPTIONS * Y ou can select either Pro Logic IIx or Pro Logic II processing using the PLII/PLIIx parameter on page 61. DOLBY DIGITAL : SUR. STANDARD Standard 5. 1-channel p rocessing f or Dolby Digit al sources. MUL TI DOLBY DIGITAL : SUR. ENHANCED CINEMA DSP enh anced proc essing for Do lby Digita l sources. DOLBY D EX : …

• Yamaha RX-V550 — page 47

  45 English SOUND FIELD PROGRAM DESCRIPTIONS SOUND FIELD PROGRAM S Y ou can select from the follo wing sound fields when playi ng music sources, like CD, FM /AM broadcasting, tapes, etc. * Y o u can select either Pr o Logic IIx or Pro Logic II processin g using the PLII /PLIIx parameter on page 61. For music sources Program Features Sources CONCERT …

• Yamaha RX-V550 — page 48

  ADVANCED OPERATIONS 46 Use this feature to automa tically set this unit in the standby mode after a certain amount of time. The sleep timer is useful when you are goi ng to sleep while this unit is playing or recording a s ource. The sleep timer also automatically turns of f an y e xternal components connected to the A C OUTLET(S). ■ Setting the …

• Yamaha RX-V550 — page 49

  47 English ADVANCED OPERATIONS AD V ANCED OPERA TION Y ou can adjust the output level of each speak er while listening to a music source. This is also possible when playing sources through th e MUL TI CH INPUT jacks. Please note that this operation will o verri de the lev el adjustments made in “BASIC SETUP” (page 23), “SP LEVEL” (page 51) …

• Yamaha RX-V550 — page 50

  SET MENU 48 Y ou can use the follo wing parameters in SET MENU to adjust a v ariety of system settings and customize the way this unit operates. Change the ini tial settings (indicated in bold under ea ch parameter) to reflect the needs of your listening en vironment. ■ BA SIC SETUP Use to quickly setup basic syst em parameters (see page 23). ■ …

• Yamaha RX-V550 — page 51

  49 English SET MENU AD V ANCED OPERA TION Use the remote control to acce ss and adjust each parameter . y Y ou can change SET MENU para meters while the unit is reproducing sound . Y ou cannot change some SET MENU parameters while the unit is in either cinema or music ni ght listening mode. 1 Press AMP. 2 Press SET MENU. “B ASIC SETUP” appears …

• Yamaha RX-V550 — page 52

  50 SET MENU Use to manually adjust any sp ea ker setting or compensate for video signal processin g delays when using LCD monitors or projectors. Most of the SOUND MENU parameters are set aut oma tically when you perform “B ASIC SETUP” (see page 23). ■ Speaker set A)SPEAKER SET Use to manually adjust any speaker setting. y If you are not sati …

• Yamaha RX-V550 — page 53

  51 English SET MENU AD V ANCED OPERA TION ■ Speaker le vel B )SP LEVEL Use these se ttings to manuall y balance the speaker le vels between the front left o r surr ound left speakers and each speaker selected in SPEAKER SET (page 50). Choices: –10.0 dB to +10.0 dB • FR adjusts the balance of the front left and front right speakers. • C adju …

• Yamaha RX-V550 — page 54

  52 SET MENU ■ Aud i o s e t G)AUDIO SET Use to customize this units o v erall audio settings. A udio m ute A.MUTE Use to adjust how much the mute function reduces the output volume. Choices: MUTE , –20 dB • Select MUTE to com pletely halt all output of sound. • Select –20 dB to reduce the current v olume b y 20 dB. A udio dela y A.DELAY U …

• Yamaha RX-V550 — page 55

  53 English SET MENU AD V ANCED OPERA TION Use to adjust the optional system param eters. ■ Display set A)DISPLAY SET Dimmer DIMMER Use to adjust the brightness of the front panel display . Choices: –4 to 0 Video con ver sion V CONV. Use this feature to turn on/off con version of composite (VIDEO) signals to S-V ideo si gnals. This allo ws you t …

• Yamaha RX-V550 — page 56

  REMOTE CONTROL FEATURES 54 In addition to controlling this unit, th e remote control can also operate other A/V compone nts made by Y AMAHA and other manufacturers. T o contro l other components, you must set up remote c ontrol with the appropriate manufacturer codes. ■ Controlling this unit The shaded a reas belo w can be used to control this un …

• Yamaha RX-V550 — page 57

  55 English REMOTE CONTROL FEATURES AD V ANCED OPERA TION Y ou can control other co mponents b y setting the appropriate manufacturer code s. Codes can be set up for each input area. F or a comp lete list of av ailable manufacturer codes, refer to “LIST OF MANUF A CTURER CODES” at the end of this manual. The follow ing table sho ws the factory p …

• Yamaha RX-V550 — page 58

  56 REMOTE CONTROL FEATURES Once you set the appropriate manufacturer codes, you can use this remote to control your other components. Note that some b uttons ma y not correctly operate the sele cted component. Use the input select or b uttons to select the component you want to operate. The remote control automatically switches to the appropriate c …

• Yamaha RX-V550 — page 59

  57 English REMOTE CONTROL FEATURES AD V ANCED OPERA TION ■ Clearing a setup man ufacturer code f or component contr ol 1 Press an input selector button or / to select the component control f or which y ou want to clear the manufacturer code. 2 Press CODE SET using a ballpoint pen or similar object. The TRANSMIT indicator on the remot e control fl …

• Yamaha RX-V550 — page 60

  EDITING SOUND FIELD PARAMETERS 58 What really crea tes the rich, full tones of a li ve instrument are the multi ple reflections from the walls of the room. I n addition to making the sound “live”, these reflections enable us to tell where the player is situa ted, and the size and shape of the room in which we are sitting. ■ Elements of a soun …

• Yamaha RX-V550 — page 61

  59 English EDITING SOUND FIELD PARAMETERS ADDITIONAL INFORMA TION 5 Repeat st eps 2 th roug h 4 as n ecessary t o change other pr ogram parameter s. Y ou cannot change parameter va lues when “MEMOR Y GU ARD” is set to ON. If you want to cha nge the parameter v alues, set “MEM OR Y GU ARD” t o OFF (se e page 53) . ■ Resetting paramet ers t …

• Yamaha RX-V550 — page 62

  SOUND FIELD PARAMETER DESCRIPTIONS 60 Y ou can adjust the values of certain digital sound field para meters so the sound fields are recreated accurately in your listening room. Not all of the follo wing parameters are found in e v ery program. ■ DSP LEVEL Function: This parameter adjusts the le vel of al l the DSP ef fect sounds within a narro w …

• Yamaha RX-V550 — page 63

  61 English SOUND FIELD PARAMETER DESCRIPTIONS ADDITIONAL INFORMA TION For PR O LOGIC IIx Music and PR O LOGIC II Music ■ P ANORAMA Function: Extends the front stereo image to incl ude the surround speakers for wraparound ef fect. Choices: OFF/O N, initial setting is OFF. ■ DIMENSION Function: Gradually adjusts the sound field either to wards th …

• Yamaha RX-V550 — page 64

  TROUBLESHOOTING 62 Refer to the chart belo w when this unit does not function p roperl y . If the problem you are e xperiencing is not listed belo w or if the instruc tion belo w does not help, set this unit to the standby mode, disconnect th e po wer cord, and contact the nearest authorized Y AMAHA dealer or service center . ■ General TROUBLESHO …

• Yamaha RX-V550 — page 65

  63 English TROUBLESHOOTING ADDITIONAL INFORMA TION Prob lem Cause Remedy Refer to page The sound su ddenly goes off. The protect ion circuitr y has been activated because of a short cir cuit, etc. Check that the impedan ce selec tor setting is correct . 21 Check that the speaker wi res are not touching each other and the n turn this uni t back on. …

• Yamaha RX-V550 — page 66

  64 TROUBLESHOOTING Problem Cause Remedy Refer to page Dolby Digital or DTS sources cannot be played. (Dolby Digital or DTS indicator in the front panel display does not light up.) The connecte d componen t is not se t to output Dolby Dig ital or DTS digital signals. Make an appropriat e setting following the ope rations instruct ions for your compo …

• Yamaha RX-V550 — page 67

  65 English TROUBLESHOOTING ADDITIONAL INFORMA TION ■ T uner ■ Remote contr ol Problem Cause Remedy Refer to page FM FM stereo r eception i s noisy . The charact eristics of FM stereo broadcas ts may cause this problem when the transmitt er is too far a way or the antenna input is poor . Check the a ntenna co nnection s. T ry using a hig h-quali …

• Yamaha RX-V550 — page 68

  RESETTING THE FACTORY PRE SETS 66 If you want to reset all of your unit’ s parameters for any reason, do the follo wing. This procedure completely reset s ALL parameters, including th e SET MENU, lev el, assign and tuner presets. Be sure this unit is in standb y mode. 1 Hold down STRAIGHT (EFFE CT) on the fr ont panel and press ST ANDBY/ON. “F …

• Yamaha RX-V550 — page 69

  GLOSSARY 67 English ADDITIONAL INFORMA TION ■ Dolby Digital Dolby Digital is a digital surround sound system that giv es you completely independent mu lti-channel audio. W ith 3 front channels (left, center , and right), and 2 surround stereo channels, Dolb y Digita l pro vides 5 full-rang e audio channels. W ith an additional channel especially …

• Yamaha RX-V550 — page 70

  68 GLOSSARY ■ CINEMA DSP Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in a theater ha vi ng many speak ers and designed for acoustic effects. Since home conditions , such as room size, wall material, number of speak ers, and so on, can diff er so widely , it’ s inevitable …

• Yamaha RX-V550 — page 71

  69 English GLOSSARY ADDITIONAL INFORMA TION ■ Component video signal W ith the component video signal system, the video signal is separated into the Y signa l for the luminance and the P B and P R signals for the chromi nance. Co lor can be reproduced more faithfully with this system because each of these signals is independ ent. The component si …

• Yamaha RX-V550 — page 72

  SPECIFICATIONS 70 A UDIO SECTION • Mi nimum RMS Out put Power for Front, Cent er , Surround, Surround ba ck 20 Hz to 20 kHz, 0.0 6% THD, 8 Ω … ………………….. …………. 90 W • Maximum Power (EIAJ) [China, Korea and Gene ral model s] 1 kHz, 10% THD, 8 Ω …………………. ……………… …………….. 130 W • D yna …

• Yamaha RX-V550 — page 73

  i LIST OF MANUF A CTURER CODES LISTE DES CODES DE F ABRICANT LISTE DER H ERSTELLERCODES LIST A Ö VER TILL VERKARK ODER LIST A DEI CODICI DEI F ABBRICANTI LIST A DE CÓDIGOS DE F ABRICANTES LIJST MET F ABRIKANTENCODES СПИСОК К ОДОВ ПР ОИЗВОДИТЕЛЕЙ TV ADMIRAL 0411, 0451, 0911, 1021, 1081 AIKO 0891 AKAI 0061, 0101, 0231, 1191 …

• Yamaha RX-V550 — page 74

  ii KOR TING 0431, 1011, 1021, 1081, 1541 KTV 0601, 1171 LENOIR 0601, 1511 LEYEO 1181 LG (GOLDST AR) 05 91, 0601, 0761, 0791, 1371, 1491, 1511, 1561, 1621, 1641 LIFETEC 259 1, 2601, 2611, 2621, 2641, 2651, 2661, 2671, 2681, 2691, 2711, 2761, 2771, 2781 LOEWE OPT A 0121, 0131, 0581, 0611, 1081 LOGIC 1691, 2281 LOGIK 0551, 1681, 2281 LOWEWE 0831 LUMA …

• Yamaha RX-V550 — page 75

  iii THOMSON 0331 , 0481, 0531, 0571, 0631, 0651, 0731, 0901, 1241, 1571, 1591, 1791, 1811, 1821, 1891, 1941, 2531 THORN 0741, 0861, 2091, 2251, 2271, 2281 THORN-FERGUSON 0281, 0371, 0551, 0651, 0781, 0861, 0881, 1131, 1181, 1361, 1461, 1971, 1991, 2281 TMK 0141, 0791 , 1471 TOSHIB A 0141, 0381, 048 1, 1221, 1271, 1701, 1741, 1851, 2151, 2801, 2811 …

• Yamaha RX-V550 — page 76

  iv FR ONTECH 0112 FUNAI 0432 GBC 0002 GEC (UK) 002 2, 0052 GELOSO 0002 GENERAL TECHNIC 1172 GOODMANS 000 2, 0072, 0282, 0432, 0502 GOODMANS (UK) 0002 GRAETZ 0022, 004 2 GRANAD A 0052, 0132, 0532, 0572 GRANAD A (UK) 00 52, 0092, 0462, 0602, 0812, 0822 GR UNDIG 0052, 0062, 0092, 0232, 0252, 0262, 0752, 0802 HANSEA TIC 0052, 0812 HARMAN/KARDON 0122, 0 …

• Yamaha RX-V550 — page 77

  v GENEXXA 0525, 0825, 0855, 0875, 0995, 1265, 1285, 1345, 1355, 1485, 1575, 1675, 1715, 1825 GR UNDIG 0175 HARMAN KARDON 0325, 0495, 0565, 1135, 1145, 1155 HIT ACHI 0065 , 0585, 0685, 0945, 1005, 1015, 1225, 1545 INNO V A TION 1995 , 2005, 2015 ITT -NOKIA 0185 JVC (VICTOR) 0385, 03 95, 0455, 0575, 0585 KARCHER 0485 KENWOOD 0025, 0055, 014 5, 0215, …

• Yamaha RX-V550 — page 78

  YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHO RPE AVE., BUEN A PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE. , SCARBOROUGH, ONTAR IO M1S 3R1, CAN ADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RE LLINGEN BEI HAMBURG , F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZA T BP70 CROISSY-BEAUB …

Найди любой мануал:

Например: Sony VGN-FW460J/T

• Страница 1

  YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHO RPE AVE., BUEN A PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE. , SCARBOROUGH, ONTAR IO M1S 3R1, CAN ADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RE LLINGEN BEI HAMBURG , F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZA T BP70 CROISSY-BEAUB […]

• Страница 2

  1 T o assure the finest performance, please read this manual carefully . Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry , clean place — away fr om direct sunlight, heat sources, vibration, dust, moisture , and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the lef[…]

• Страница 3

  1 English PREP ARA TION INTRODUCTION BAS I C OPERA TION SOUND FIELD PROGRAM S AD V ANCED OPERA TION ADDITIONAL INFORMA TION FEATU RES …… ………… ………. ………… ……… ………… 2 GETTING STARTED … ………. ………… ………… ……. 3 Supplied accessories ………….. ……………. …………… ….. 3 Ins[…]

• Страница 4

  FEATURES 2 Built-in 6-channel power amplifier ◆ Minimum RMS output po wer (0.06% THD, 20 Hz – 20 kHz, 8 Ω ) Front: 90 W + 90 W Center: 90 W Surround: 90 W + 90 W Surround back: 90 W Sound field featur es ◆ Proprietary Y AMAHA technology for the creation of sound fields ◆ Dolby Digita l/Dolb y Digital EX decoder ◆ DTS/DTS-ES Matrix 6.1, […]

• Страница 5

  GETTING STARTED 3 English INTRODUCTION Please check t hat you recei ved all of the following parts. 1 Press the part and slide the battery compartment cover off. 2 Insert four supplied batteries (AAA, R03, UM-4) according to th e polarity markings (+ and –) on the inside of the battery compartment. 3 Slide the cover back unt il it sn aps into pla[…]

• Страница 6

  CONTROLS AND FUNCTIONS 4 1 ST AND BY/ON T urns on this unit or sets it to the standby mode. When you turn on this unit, you will hear a click a nd there will be a 4 to 5-second delay before this unit can reproduce sound. In standby mo de, this unit consumes a small amo unt of po wer in order to receive infrared-signa ls from the remote control. 2 R[…]

• Страница 7

  CONTROLS AND FUNCTIONS 5 English INTRODUCTION 0 PHONES (SILENT CINEMA) jack Outputs audio signals for pri v ate listening with headphones. When you connec t headphones, no sign als are output to the OUTPUT jacks or to the speakers. All Dolby Digital and DTS au dio signals are mix ed down to the left and right headphone channels. A SPEAKERS A/B T u […]

• Страница 8

  CONTROLS AND FUNCTIONS 6 This section describes the func tion of each control o n the remote control used to contro l this unit. T o operate other components, see “REMO TE CONTR OL FEA TURES” on page 54. 1 Infrared windo w Outputs infrared control signals. Aim thi s window at the component you want to operate. 2 CODE SET Use to set up manufactu[…]

• Страница 9

  CONTROLS AND FUNCTIONS 7 English INTRODUCTION H STRAIGHT (EFFECT) Switches the sound f ields of f or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respec tiv e speak ers without effect processing. I SET MENU (A/B/C/D/E) Acti vat es the SET MENU function . Selects preset station groups when […]

• Страница 10

  CONTROLS AND FUNCTIONS 8 1 Decoder indicator s When any of this unit’ s decode rs function, the respectiv e indicator lights up. 2 SILENT CINEMA indicator Lights up when headphones are connected and a sound field progr am is sele cted (see page 27). 3 NIGHT indica tor Lights up when you select night listening mode. 4 Input source indicators A cur[…]

• Страница 11

  CONTROLS AND FUNCTIONS 9 English INTRODUCTION K LFE indicator Lights up when the input signal contains the LFE signal. L Input chann el indicator s/speaker indicato rs Indicate the channe l components of the current digital input signal. Indicate the n umber of speak ers connected in SPEAKERS (page 24), or indicate the ch annel being adjusted in SP[…]

• Страница 12

  CONTROLS AND FUNCTIONS 10 1 DIGIT AL INPUT jacks See pages 15, 17 and 18 for details. 2 MUL T I CH INPUT jac ks See page 16 for connection information. 3 Video component ja cks See pages 15 and 17 for connection information. 4 A C OUTLET(S) Use to supply po wer to your other A/V components (see page 20). 5 DIGIT AL OUTPUT jack See page 18 for detai[…]

• Страница 13

  SPEAKER SE TUP 11 English PREP ARA TION The speaker layout belo w sho ws the standard ITU-R speaker setting. Y ou can us e it to enjo y CINEMA DSP and multi-channel audio sources. Front speaker s (FR and FL) The front speakers are used for the main source sound plus effect sounds. Place these speakers an equal distance from the ideal listening posi[…]

• Страница 14

  12 SPEAKER SETUP Be sure to connect the left ch annel (L), right channel (R), “+” (red) and “–” (black) prope rly . If the connections are faulty , no sound will be heard from the speakers, and if the polarity of the speaker connect ions is incorrect, the sound will be unnatural and lack bass. • If you will use 6 ohm speakers, be sure t[…]

• Страница 15

  13 English SPEAKER SE TUP PREP ARA TION ■ FRONT terminals Connect one or two speak er systems to these terminals. If you use only one speaker system , connect it to either the FR ONT A or B terminals. ■ CENTER terminals Connect a center speak er to these terminals. ■ SURROUND terminals Connect surround speak ers to these terminals. ■ SUB WO[…]

• Страница 16

  CONNECTIONS 14 Do not connect this unit or other components to the mains power until all connections between components are complete. ■ Cable indication s ■ Analog jac ks Y ou can input analog signals from audio components by connecting audio pin ca ble to the analog jacks on this unit. Connect red plugs to the right jacks and white plugs to th[…]

• Страница 17

  15 English CONNECTIONS PREP ARA TION ■ Connections f or D VD pla ybac k Connecting video components MONITOR OUT AUDIO VIDEO S VIDEO DVD VIDEO R L VIDEO COMPONENT VIDEO P R DVD MONITOR OUT P B Y DVD S VIDEO L R O DVD p l a ye r Video monitor Optical out V ideo out Audio out V i deo in 01EN_00_RXV550_EB.b ook Page 15 Thursday, Feb ruary 5, 2004 1:5[…]

• Страница 18

  16 CONNECTIONS ■ Connecting to the MUL TI CH INPUT jacks This unit is equipped with 6 additio nal input jacks (left and right FR ONT , CENTER, left and right SURROUND and SUB WOOFER) for discrete multi-channe l input from a multi-format player , external decoder , sound processor or pre- amplifier . Connect the output jacks on your multi-format p[…]

• Страница 19

  17 English CONNECTIONS PREP ARA TION ■ Connections f or other video components ■ VIDEO A UX jacks (on the fr ont panel) Use these jacks to connect an y video source, such as a game console or video camer a, to this uni t. AUD I O VIDEO S VIDEO DTV /CBL VIDEO R L OUT VCR IN COMPONENT VIDEO P R DTV /CBL P B Y DIGIT AL INPUT DTV/CBL CD COAXIAL OPT[…]

• Страница 20

  18 CONNECTIONS ■ Connections f or audio components Connecting audio components AUD I O R L IN ( PLA Y ) ( REC ) MD /CD-R CD DIGIT AL OUTPUT DIGIT AL INPUT OPTICAL MD/CD-R CD COAXIAL MD/CD-R L R L R L R O O C CD player MD recorder or tape dec k Coaxial out Audio out Audio in Audio out Optical in Optical ou t 01EN_00_RXV550_EB.b ook Page 18 Thursda[…]

• Страница 21

  19 English CONNECTIONS PREP ARA TION Both AM and FM indoor antennas are included with this unit. In genera l, these anten n as should provi de suf fici ent signal strength. Connect each antenna correctly to the designated terminals. ■ Connecting the AM loop anten na 1 Set up the AM loop ante nna , then connect it to the terminals on this unit. 2 […]

• Страница 22

  20 CONNECTIONS ■ Connecting the A C power cor d Plug the po wer cord into an A C wall outlet. ■ A C OUTLET(S) (SWITCHED) U.K. and Australia models .. ……….. ……….. …… 1 OUTLET K orea model …….. ……….. ……….. ………… ……….. ………. None Other models ………….. ……….. ……….. ……….. …2 […]

• Страница 23

  21 English CONNECTIONS PREP ARA TION ■ IMPED ANCE SELECTOR s witch Do not change the setting of the IMPED ANCE SELECT OR switch when the unit po wer is switched on, as doing so may damage the unit. If this unit fails to turn on when ST ANDBY/ON is pressed on either the front panel or remote control, the IMPED ANCE SELECT OR switch may not be full[…]

• Страница 24

  22 CONNECTIONS When all connections are complete, turn on the power of this unit. 1 Press ST ANDBY/ON (SYSTEM PO WER on the remote control) to turn on the power of this unit. 2 T urn on the video monitor connected to this unit. T urning on the power AUTO/MAN’L MONO MAN’L/AUTO FM LEVEL NEXT EDIT EFFECT MEMORY FM/AM PRESET/TUNING A/B/C/D/E […]

• Страница 25

  BASIC SETUP 23 English PREP ARA TION The basic setup feat ure is a useful w ay to set up your system quickly and with minimal ef fort. y • If you wish to conf igure the un it manually using more precise adjustments, use the detailed parameter s in SOUND MENU (page 50) instead of using BASIC SETUP. • Altering any parameters in BASIC SETUP will r[…]

• Страница 26

  24 BASIC SETUP 7 Press d to display the SPEAKERS parameter . 8 Press j / i to select the number of speakers you connected. SPEAKERS 6spk 9 Press d to display SET/CANCEL. 10 Press j / i to select the desired se tting. >SET CANCEL SET T o apply the settings you chose in steps 4 through 8. CANCEL T o cancel the se tup without making any changes. 11[…]

• Страница 27

  25 English BASIC SETUP PREP ARA TION ■ T o bal ance the spea ker le vels Perform the follo wing steps after step 13 (see page 24). The unit outputs the test tone from the selected speaker and the left front (or left surround) speaker in turn. The indicator of the speaker curre ntly outputting the test tone flashes in the front panel display . 1 P[…]

• Страница 28

  PLAYBACK 26 1 Press ST ANDBY/ON (SYSTEM PO WER on the remote control) to turn on the power . 2 T urn on the video monitor connected to this unit. 3 Press SPEAKERS A or B on the front panel. Each press turns the respecti ve speak ers on or of f. 4 Select the input source. Use INPUT (or press one of the input selector b uttons on the remote control) […]

• Страница 29

  27 English PLAYBACK BAS I C OPERA TION 7 Select a sound fiel d program if desired. Rotate PR OGRAM (or press AMP on the remote control to select the AMP mode, then press one of the sound field program b uttons repeatedly) to select a sound field p rogram. (See page 43 for details about sound field programs.) T o listen wit h headphones ( SILENT CIN[…]

• Страница 30

  28 PLAYBACK ■ Selecting MUL TI CH INPUT Press MUL TI CH INPUT so that “MUL TI CH INPUT” appears in the front panel display and video monitor . MULTI CH INPUT When “MUL TI CH INPUT” is shown in the front panel display , no other source can be played. T o select another input source with INPUT (or one of the input selector b uttons), pres s[…]

• Страница 31

  29 English PLAYBACK BAS I C OPERA TION ■ Remote contr ol operation Press AMP to select the AMP mode, then press one of the sound field program buttons repeatedly to select the desired program. The name of the selected program appears in the front panel display . y Feel free to choose a sound f ield program based on your listening preference, and […]

• Страница 32

  30 PLAYBACK • Some 6.1-channel compatible discs do not ha ve a signal (flag) which this unit can automatically detect. Whe n playing these kinds of discs with 6.1-channe l, select a decoder manually (PLIIx Music, EX/ ES or EX). • 6.1-channel playback is not possibl e e ven if EX/ES is pressed in the following cases: – When “SURR LR” (see […]

• Страница 33

  31 English PLAYBACK BAS I C OPERA TION ■ Listening to high fidelity stereo sound (Direct Stereo) Direct Stereo allo ws you to b ypass this unit’ s decoders and DSP processors to enjoy pure high fidelity sound from 2- channel PCM and analog sources. Rotate PROGRAM (or pre ss AMP to select the AMP mode, then press ST EREO repeatedly) to select ?[…]

• Страница 34

  32 PLAYBACK ■ Down mixing to 2 c hannels Y ou can enjoy 2-channel stereo playback ev en from multi- channel sources. Rotate PROGRAM (or press STEREO on the remote control) to select 2ch Stereo. 2ch Stereo y Y ou can use a subwoofer with this program when SWFR or BO TH is selected in “BASS OUT”. ■ Listening to unpr oces sed input signals In […]

• Страница 35

  33 English PLAYBACK BAS I C OPERA TION • When you play DTS-encoded CD/LDs with the input mode set to A UT O: – This unit automatically switches to the DTS decoding mode. The unit remains in DTS mode (and the t indicator may flash) for up to 30 seconds after playb ack of the DTS source is complete. T o manually release the D TS mode, press INPUT[…]

• Страница 36

  TUNING 34 There are 2 tuning methods ; automatic and manual. Automatic tuning is ef fectiv e when station signals are strong and there is no interference. ■ A utomatic tuni ng 1 Rotate INPUT to select TUNER as the input sour ce. 2 Press FM/AM to select the reception band. “FM” or “AM” appears in the front panel display . 3 Press TUNING MO[…]

• Страница 37

  35 English TUNING BAS I C OPERA TION ■ Manual tuning If the signal from the station you want to select is weak, tune into it manually . Manuall y tuning into an FM station will automatical ly switch the tuner to monaur al reception to increase the signal qua lity . 1 Select TUNER and the reception band follo wing steps 1 and 2 as described in “[…]

• Страница 38

  36 TUNING 3 Press and hold MEMOR Y (MAN’L/A UT O FM) for more than 3 seconds. The preset number , the MEMOR Y and A UT O indicators flash. After a bout 5 seconds, automatic presetting starts from the frequency currently displayed and proceeds to ward the higher frequencies. When automatic pre set tuning is comple ted, the front panel display sho […]

• Страница 39

  37 English TUNING BAS I C OPERA TION 4 Press PRESET/TUNING l / h to select a preset station number (1 through while the MEMOR Y indicator is flashing. Press h to select a higher preset station number . Press l to select a lower preset station number . 5 Press MEMOR Y (MAN’L/A UT O FM) on the front panel while the MEMOR Y indicator is flashing.[…]

• Страница 40

  38 TUNING Y ou can exchange t he assignmen t of two preset stations with each other . The example belo w describes the procedure for exchanging preset station “E1” with “A5”. 1 Select preset station “E1” using A/B/C/D/E and PRESET/TUNING l / h . See “Selec ting preset sta tions”. 2 Press and hold PRESET/TUNING (EDIT) for more than 3[…]

• Страница 41

  39 English TUNING BAS I C OPERA TION RDS (Radio Data System) is a data transmission system used by FM stations in many countries. The RDS function is carried out among the network stations. This unit can receiv e v arious RDS data such as PS (Program Service na me), PTY (Program T ype), R T (Radio T ext), CT (Clock T ime ), EON (Enhanced Other Netw[…]

• Страница 42

  40 TUNING If you select the desired program type, this unit automaticall y searches all preset RDS stations that are broadcasting a program of the required type. y When performing this operation with the remote control, first press TUNER to set the remote to tuner mode. 1 Press PTY SEEK MODE to se t this unit in the PTY SEEK mode. The program type […]

• Страница 43

  41 English TUNING BAS I C OPERA TION This function uses the EON data service on the RDS station network. If you select the desired program type (NEWS, INFO, AFF AIRS or SPOR T), this unit automatical ly searches for all preset RD S stations that are scheduled to broadcast the se lected type of program and switches from the station curr ently being […]

• Страница 44

  RECORDING 42 Recording adjustments a nd other operations are performed from the recording components. Refer to the operating instructions for those components. 1 T urn on the power of this un it and al l connected c omponents. 2 Select the source component y ou want to record fr om. 3 Start playbac k (or select a broadcast station) on the source co[…]

• Страница 45

  SOUND FIELD PROGRAM DESCRIPTIONS 43 English SOUND FIELD PROGRAM S This unit is equipped with a variety of precise digital de coders that allo w you to enjo y multichannel playback from almost any sound sour ce (stereo or mu ltichannel). This unit is also equipped with a Y AMAHA digital sound f ield processing (DSP) chip containing se veral sound f […]

• Страница 46

  44 SOUND FIELD PROGRAM DESCRIPTIONS * Y ou can select either Pro Logic IIx or Pro Logic II processing using the PLII/PLIIx parameter on page 61. DOLBY DIGITAL : SUR. STANDARD Standard 5. 1-channel p rocessing f or Dolby Digit al sources. MUL TI DOLBY DIGITAL : SUR. ENHANCED CINEMA DSP enh anced proc essing for Do lby Digita l sources. DOLBY D EX : […]

• Страница 47

  45 English SOUND FIELD PROGRAM DESCRIPTIONS SOUND FIELD PROGRAM S Y ou can select from the follo wing sound fields when playi ng music sources, like CD, FM /AM broadcasting, tapes, etc. * Y o u can select either Pr o Logic IIx or Pro Logic II processin g using the PLII /PLIIx parameter on page 61. For music sources Program Features Sources CONCERT […]

• Страница 48

  ADVANCED OPERATIONS 46 Use this feature to automa tically set this unit in the standby mode after a certain amount of time. The sleep timer is useful when you are goi ng to sleep while this unit is playing or recording a s ource. The sleep timer also automatically turns of f an y e xternal components connected to the A C OUTLET(S). ■ Setting the […]

• Страница 49

  47 English ADVANCED OPERATIONS AD V ANCED OPERA TION Y ou can adjust the output level of each speak er while listening to a music source. This is also possible when playing sources through th e MUL TI CH INPUT jacks. Please note that this operation will o verri de the lev el adjustments made in “BASIC SETUP” (page 23), “SP LEVEL” (page 51) […]

• Страница 50

  SET MENU 48 Y ou can use the follo wing parameters in SET MENU to adjust a v ariety of system settings and customize the way this unit operates. Change the ini tial settings (indicated in bold under ea ch parameter) to reflect the needs of your listening en vironment. ■ BA SIC SETUP Use to quickly setup basic syst em parameters (see page 23). ■[…]

• Страница 51

  49 English SET MENU AD V ANCED OPERA TION Use the remote control to acce ss and adjust each parameter . y Y ou can change SET MENU para meters while the unit is reproducing sound . Y ou cannot change some SET MENU parameters while the unit is in either cinema or music ni ght listening mode. 1 Press AMP. 2 Press SET MENU. “B ASIC SETUP” appears […]

• Страница 52

  50 SET MENU Use to manually adjust any sp ea ker setting or compensate for video signal processin g delays when using LCD monitors or projectors. Most of the SOUND MENU parameters are set aut oma tically when you perform “B ASIC SETUP” (see page 23). ■ Speaker set A)SPEAKER SET Use to manually adjust any speaker setting. y If you are not sati[…]

• Страница 53

  51 English SET MENU AD V ANCED OPERA TION ■ Speaker le vel B )SP LEVEL Use these se ttings to manuall y balance the speaker le vels between the front left o r surr ound left speakers and each speaker selected in SPEAKER SET (page 50). Choices: –10.0 dB to +10.0 dB • FR adjusts the balance of the front left and front right speakers. • C adju[…]

• Страница 54

  52 SET MENU ■ Aud i o s e t G)AUDIO SET Use to customize this units o v erall audio settings. A udio m ute A.MUTE Use to adjust how much the mute function reduces the output volume. Choices: MUTE , –20 dB • Select MUTE to com pletely halt all output of sound. • Select –20 dB to reduce the current v olume b y 20 dB. A udio dela y A.DELAY U[…]

• Страница 55

  53 English SET MENU AD V ANCED OPERA TION Use to adjust the optional system param eters. ■ Display set A)DISPLAY SET Dimmer DIMMER Use to adjust the brightness of the front panel display . Choices: –4 to 0 Video con ver sion V CONV. Use this feature to turn on/off con version of composite (VIDEO) signals to S-V ideo si gnals. This allo ws you t[…]

• Страница 56

  REMOTE CONTROL FEATURES 54 In addition to controlling this unit, th e remote control can also operate other A/V compone nts made by Y AMAHA and other manufacturers. T o contro l other components, you must set up remote c ontrol with the appropriate manufacturer codes. ■ Controlling this unit The shaded a reas belo w can be used to control this un[…]

• Страница 57

  55 English REMOTE CONTROL FEATURES AD V ANCED OPERA TION Y ou can control other co mponents b y setting the appropriate manufacturer code s. Codes can be set up for each input area. F or a comp lete list of av ailable manufacturer codes, refer to “LIST OF MANUF A CTURER CODES” at the end of this manual. The follow ing table sho ws the factory p[…]

• Страница 58

  56 REMOTE CONTROL FEATURES Once you set the appropriate manufacturer codes, you can use this remote to control your other components. Note that some b uttons ma y not correctly operate the sele cted component. Use the input select or b uttons to select the component you want to operate. The remote control automatically switches to the appropriate c[…]

• Страница 59

  57 English REMOTE CONTROL FEATURES AD V ANCED OPERA TION ■ Clearing a setup man ufacturer code f or component contr ol 1 Press an input selector button or / to select the component control f or which y ou want to clear the manufacturer code. 2 Press CODE SET using a ballpoint pen or similar object. The TRANSMIT indicator on the remot e control fl[…]

• Страница 60

  EDITING SOUND FIELD PARAMETERS 58 What really crea tes the rich, full tones of a li ve instrument are the multi ple reflections from the walls of the room. I n addition to making the sound “live”, these reflections enable us to tell where the player is situa ted, and the size and shape of the room in which we are sitting. ■ Elements of a soun[…]

• Страница 61

  59 English EDITING SOUND FIELD PARAMETERS ADDITIONAL INFORMA TION 5 Repeat st eps 2 th roug h 4 as n ecessary t o change other pr ogram parameter s. Y ou cannot change parameter va lues when “MEMOR Y GU ARD” is set to ON. If you want to cha nge the parameter v alues, set “MEM OR Y GU ARD” t o OFF (se e page 53) . ■ Resetting paramet ers t[…]

• Страница 62

  SOUND FIELD PARAMETER DESCRIPTIONS 60 Y ou can adjust the values of certain digital sound field para meters so the sound fields are recreated accurately in your listening room. Not all of the follo wing parameters are found in e v ery program. ■ DSP LEVEL Function: This parameter adjusts the le vel of al l the DSP ef fect sounds within a narro w […]

• Страница 63

  61 English SOUND FIELD PARAMETER DESCRIPTIONS ADDITIONAL INFORMA TION For PR O LOGIC IIx Music and PR O LOGIC II Music ■ P ANORAMA Function: Extends the front stereo image to incl ude the surround speakers for wraparound ef fect. Choices: OFF/O N, initial setting is OFF. ■ DIMENSION Function: Gradually adjusts the sound field either to wards th[…]

• Страница 64

  TROUBLESHOOTING 62 Refer to the chart belo w when this unit does not function p roperl y . If the problem you are e xperiencing is not listed belo w or if the instruc tion belo w does not help, set this unit to the standby mode, disconnect th e po wer cord, and contact the nearest authorized Y AMAHA dealer or service center . ■ General TROUBLESHO[…]

• Страница 65

  63 English TROUBLESHOOTING ADDITIONAL INFORMA TION Prob lem Cause Remedy Refer to page The sound su ddenly goes off. The protect ion circuitr y has been activated because of a short cir cuit, etc. Check that the impedan ce selec tor setting is correct . 21 Check that the speaker wi res are not touching each other and the n turn this uni t back on. […]

• Страница 66

  64 TROUBLESHOOTING Problem Cause Remedy Refer to page Dolby Digital or DTS sources cannot be played. (Dolby Digital or DTS indicator in the front panel display does not light up.) The connecte d componen t is not se t to output Dolby Dig ital or DTS digital signals. Make an appropriat e setting following the ope rations instruct ions for your compo[…]

• Страница 67

  65 English TROUBLESHOOTING ADDITIONAL INFORMA TION ■ T uner ■ Remote contr ol Problem Cause Remedy Refer to page FM FM stereo r eception i s noisy . The charact eristics of FM stereo broadcas ts may cause this problem when the transmitt er is too far a way or the antenna input is poor . Check the a ntenna co nnection s. T ry using a hig h-quali[…]

• Страница 68

  RESETTING THE FACTORY PRE SETS 66 If you want to reset all of your unit’ s parameters for any reason, do the follo wing. This procedure completely reset s ALL parameters, including th e SET MENU, lev el, assign and tuner presets. Be sure this unit is in standb y mode. 1 Hold down STRAIGHT (EFFE CT) on the fr ont panel and press ST ANDBY/ON. “F […]

• Страница 69

  GLOSSARY 67 English ADDITIONAL INFORMA TION ■ Dolby Digital Dolby Digital is a digital surround sound system that giv es you completely independent mu lti-channel audio. W ith 3 front channels (left, center , and right), and 2 surround stereo channels, Dolb y Digita l pro vides 5 full-rang e audio channels. W ith an additional channel especially […]

• Страница 70

  68 GLOSSARY ■ CINEMA DSP Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in a theater ha vi ng many speak ers and designed for acoustic effects. Since home conditions , such as room size, wall material, number of speak ers, and so on, can diff er so widely , it’ s inevitable[…]

• Страница 71

  69 English GLOSSARY ADDITIONAL INFORMA TION ■ Component video signal W ith the component video signal system, the video signal is separated into the Y signa l for the luminance and the P B and P R signals for the chromi nance. Co lor can be reproduced more faithfully with this system because each of these signals is independ ent. The component si[…]

• Страница 72

  SPECIFICATIONS 70 A UDIO SECTION • Mi nimum RMS Out put Power for Front, Cent er , Surround, Surround ba ck 20 Hz to 20 kHz, 0.0 6% THD, 8 Ω … ………………….. …………. 90 W • Maximum Power (EIAJ) [China, Korea and Gene ral model s] 1 kHz, 10% THD, 8 Ω …………………. ……………… …………….. 130 W • D yna[…]

• Страница 73

  i LIST OF MANUF A CTURER CODES LISTE DES CODES DE F ABRICANT LISTE DER H ERSTELLERCODES LIST A Ö VER TILL VERKARK ODER LIST A DEI CODICI DEI F ABBRICANTI LIST A DE CÓDIGOS DE F ABRICANTES LIJST MET F ABRIKANTENCODES СПИСОК К ОДОВ ПР ОИЗВОДИТЕЛЕЙ TV ADMIRAL 0411, 0451, 0911, 1021, 1081 AIKO 0891 AKAI 0061, 0101, 0231, 1191[…]

• Страница 74

  ii KOR TING 0431, 1011, 1021, 1081, 1541 KTV 0601, 1171 LENOIR 0601, 1511 LEYEO 1181 LG (GOLDST AR) 05 91, 0601, 0761, 0791, 1371, 1491, 1511, 1561, 1621, 1641 LIFETEC 259 1, 2601, 2611, 2621, 2641, 2651, 2661, 2671, 2681, 2691, 2711, 2761, 2771, 2781 LOEWE OPT A 0121, 0131, 0581, 0611, 1081 LOGIC 1691, 2281 LOGIK 0551, 1681, 2281 LOWEWE 0831 LUMA […]

• Страница 75

  iii THOMSON 0331 , 0481, 0531, 0571, 0631, 0651, 0731, 0901, 1241, 1571, 1591, 1791, 1811, 1821, 1891, 1941, 2531 THORN 0741, 0861, 2091, 2251, 2271, 2281 THORN-FERGUSON 0281, 0371, 0551, 0651, 0781, 0861, 0881, 1131, 1181, 1361, 1461, 1971, 1991, 2281 TMK 0141, 0791 , 1471 TOSHIB A 0141, 0381, 048 1, 1221, 1271, 1701, 1741, 1851, 2151, 2801, 2811 […]

• Страница 76

  iv FR ONTECH 0112 FUNAI 0432 GBC 0002 GEC (UK) 002 2, 0052 GELOSO 0002 GENERAL TECHNIC 1172 GOODMANS 000 2, 0072, 0282, 0432, 0502 GOODMANS (UK) 0002 GRAETZ 0022, 004 2 GRANAD A 0052, 0132, 0532, 0572 GRANAD A (UK) 00 52, 0092, 0462, 0602, 0812, 0822 GR UNDIG 0052, 0062, 0092, 0232, 0252, 0262, 0752, 0802 HANSEA TIC 0052, 0812 HARMAN/KARDON 0122, 0[…]

• Страница 77

  v GENEXXA 0525, 0825, 0855, 0875, 0995, 1265, 1285, 1345, 1355, 1485, 1575, 1675, 1715, 1825 GR UNDIG 0175 HARMAN KARDON 0325, 0495, 0565, 1135, 1145, 1155 HIT ACHI 0065 , 0585, 0685, 0945, 1005, 1015, 1225, 1545 INNO V A TION 1995 , 2005, 2015 ITT -NOKIA 0185 JVC (VICTOR) 0385, 03 95, 0455, 0575, 0585 KARCHER 0485 KENWOOD 0025, 0055, 014 5, 0215, […]

• Страница 78

  YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHO RPE AVE., BUEN A PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE. , SCARBOROUGH, ONTAR IO M1S 3R1, CAN ADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RE LLINGEN BEI HAMBURG , F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZA T BP70 CROISSY-BEAUB […]